VBA Code For Fliping Images In A User Form

Jun 9, 2009

find a VBA Code for fliping images in a User Form. What I want is that, I have a user form in which I have a command button "Next" & "Previous". I want whenever I click "Next" button my image control should show the next image & whenever I click "Previous" button my image control should show the previous image. I tried many logics but failed. Might be you guys will crack this hard nut.

View 7 Replies


ADVERTISEMENT

ListBox Code In User Form?

Nov 14, 2008

I'm playing with simple UserForms to get the hang of VBA. I was trying an example for the help files (Using xl2K), and this isn't working. My first challenge was figuring out that I needed to 'create' a UserForm to begin with.

View 2 Replies View Related

Pass Value From User Form To Code

Jun 24, 2006

I have created a custome User Form with three option buttons inside a frame. How do I set the value for each button and then how do I pass that value back to the code that opened the form (after closing the form upon a selection?

Sub Test2()
UserForm1.Show
Select Case List
Case 1
Range("b1").Value = "List 1"
Case 2
Range("B1").Value = "List 2"
Case 3
Range("B1").Value = "List 3"
End Select
End Sub

in the form I have the following code associated with each of the butons (but I do not think I have it right). Isn't there a way (becasue I have them in a frame) to shorten the code?.................

View 8 Replies View Related

Code For Simple Checkbox On User Form.

Jan 21, 2010

I really don't know how to code a checkbox correctly. On the sheet, I have a form with CheckBox1 and Checkbox2. I would like Checkbox2 disabled until Checkbox1 is checked. Also, when Checkbox1 is checked, display Image1, otherwise Image1 is hidden. When CheckBox2 is enabled and checked, display Image2, otherwise Image2 is hidden. I know this is real beginner stuff, I'm still a rookie.

View 4 Replies View Related

Show User Form After Workbook_open Code Has Executed

Apr 19, 2006

i have this code which askes the user for a job number once the workbook is opened.

Private Sub Workbook_open()

' If sheet was named by original open routine, exit

If ActiveSheet.Name = "Main Roof" Then Exit Sub

' otherwise

Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")

' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub


' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.

what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.

View 3 Replies View Related

Dynamically Add Controls To User Form Macro Code

Apr 9, 2008

I am trying to dynamically add controls to my user form based on some values in my cell. I am successfully able to create a text box dynamically but my label is not getting displayed. here is my code


Private Sub UserForm_Activate()

On Error Resume Next
If (ThisWorkbook. Sheets("Sheet2").Cells(1, 8) <> "FALSE") Then
Dim ctl As Control
Dim ctl1 As Control


Set ctl1 = Me.Controls.Add("Forms.Label.1", ctl1, True)
With ctl1

View 9 Replies View Related

User Form: Which Format The Code In Order To Get Information To Appear In A Spreadsheet

Oct 24, 2007

I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet
http://www.srfl.ca/userform.htm

View 9 Replies View Related

Form Controls / Objects / Images Disappearing Not Responding

Aug 10, 2014

My form controls (cmd buttons) and images don't appear or don't work. I was working on a macro to cut and paste a set of cells (protected sheet, I did unprotect it), and I noticed the cmd button tied to this disappeared. It then re-appeared but I couldn't engage it. This is part of a larger workbook that consists of a single page of cmd buttons that release specific worksheets (no activex). These buttons disappeared and re-appeared and don't work either. When I select the button I can see the cell underneath light up. It's like the image is there but nothing else?

The macros run fine from VBA editor. I was thinking the issue had something to do protections? There are more than 5 passwords (set on a worksheet) being used here, there is a fair amount of protecting and unprotecting going on, and I loop through the worksheets several times. Everything was working fine and now I'm stuck. I was getting a the-object-invoked-has-disconnected-from-its-client error related to an "insert cells" command on a co-workers computer, but not on my machine. This is actually what I was trying to solve when it crapped out. I would delete the buttons and create them all again, but I can't even select them to delete them.

View 5 Replies View Related

User Form-Easy Selection Of Data To Be Filled In The Form

Jun 3, 2006

find the attached workbook

I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:

When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.

Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.

View 7 Replies View Related

Prevent The User From Saving The Data Input From The User Form If Any Of Those Three Fields Is Left Blank

Feb 9, 2010

I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.

What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)

View 2 Replies View Related

Look Up Data And Plug Into Form - User Form In Reverse?

Jan 14, 2009

I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.

Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.

View 3 Replies View Related

Unload Or Hide User Form On Show Next Form

Dec 2, 2008

I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).

All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.

Private Sub cmdContinueType_Click()

ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select

Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True

If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If

End Sub

View 9 Replies View Related

How To Put Macro Code To Images Near Cells

Feb 7, 2014

put around 2000 image products into a near cells based on my currently codes.

For example i have:

A1: 0102-2000
A2: 0102-2001
A3: 0103-2002
etc..

And i have a folder with all images products looks like 0102-2000-523532523.jpg, 0102-2001-43252352.jpg, 0103-2002-5654754754745.jpg

How can i put with a macro code all these images near the above cells?

View 9 Replies View Related

UserForm Initialization: Fill The Form Out Once And Click 'OK' (run The Code To Put The Form Data Into A Sheet)

Mar 31, 2009

I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?

View 2 Replies View Related

User Forms- Create A User Form That Will "pop Up"

Oct 25, 2007

I have a spreadsheet with the following headings:

A
Claims Number

B
Name

C
Scheme

D
Admin

E
Date

I need to create a user form that will "pop up" and ask the administrator to enter the above details.

A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered

View 9 Replies View Related

User Form

Feb 24, 2009

I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.

I have this code so far but it is not working.

Private Sub cmdSubmit_Click()
Dim Month As Variant

Month = Me.cmbMonth.Value

ActiveWorkbook.Sheets(Month).Activate

I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.

View 9 Replies View Related

Combobox In A User Form

Aug 30, 2007

I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.

Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.

View 14 Replies View Related

User Form Drop Down Box

May 25, 2008

I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.

View 11 Replies View Related

User Form Interaction

Jun 22, 2009

I have created a multi utility user form that user can initialize by a shortcut key. The problem if user want to see the content on sheet or want to change the active cell, he has to close the form and then do any action. This form is initialized by a command and default included in excel as a Add-in. Is there is any way to make the form floating i.e. user can manipulate the data and can see the form as well.

View 4 Replies View Related

Using The Scroll Bar In A User Form

Jul 8, 2009

On a userform, I have 5 paragraphs of text that the user needs to read. The problem is the user can't see all 5 paragraphs, the user is only able to see about two paragraphs. I don't want to make the userform larger but I would like to add some type of scroll bar that would allow the user to scroll up and down to view all of the text.

View 7 Replies View Related

Comments In User Form ...

Dec 20, 2009

Can anybody help me with a code that shows a comment within the user form when specific a checkbox is selected?

I am attaching a sample file with user form containing 6 checkboxes. I need when Name6 is selected, a comment "Test" to appear inside the user form beside the checkbox.

View 6 Replies View Related

Placing User Form

Apr 6, 2007

I have created a user form (thanks Datsmart), and now need to place the data that will be inserted in that userfom onto my spreadsheet.

The spreadsheet will have 50 rows, each containing a different project. There will be a button on each row to activate the user form for that specific row. They click the button on the spreadsheet, and the user form opens. They enter the data on the user form, and once they click the "add comment" button on the user form, the data should be entered in the last cell of the row on which the button is located.

Now the complicated part:

The users will use that for to update the project from week to week, but each week's comment needs to go in the same cell, but above the previous comment.

IE:

Week 1

Jan 1: Project lauched

Week 2

Jan 6: Project budget submitted
Jan 1: Project lauched

Week 3

Jan 22: Budget approved
Jan 6: Project budget submitted
Jan 1: Project lauched

The date being the date from the user form, and the comment being the comment from the user form. If the latest date can be bolded that would be a bonus.

They each have to go in the same cell cause all relate to the same project. This same thing will be repeated 50 times for each different project.

View 9 Replies View Related

User Form Printing

May 24, 2007

I came here yesterday asking for help and was helped immediatly, but I have another question/problem. I got my user form up and running, however I've just been informed that the form has to be able to be printed out. So basically I need this user form with all the data on it and I need it to be printed.

Is there a way to add a command button perhaps that prints out the form with the data on it? (Ex: Imput Data, hit Print command button, have an electronic and hard copy of the information)

View 9 Replies View Related

Mask In User Form

Oct 16, 2007

I have a user form with 2 textboxes (used as parameters for an ODBC query). The entry should be a period, as yyyymm. How can I check, for instance when clicking the Ok button after entry, that both textboxes are of the "000000" format and the last 2 numbers are between 01 and 12?

View 9 Replies View Related

Counter For User Form

May 10, 2009

I have the following code in a user form....

Private Sub cbSearch_Click()
Dim Product As Range
Set Product = Sheets("Master").Range("A1:A300").Find(Val(tbLookFor), lookat:=xlWhole, LookIn:=xlValues)
If Product Is Nothing Then
MsgBox "Incorrect Product code, try again"
Else
'Populate the userform with data
Dim counter
counter = (0) + 1
Label35 = counter
tbData1 = Product.Offset(0, 1) 'Down 1 row, over 1 column
tbData2 = Product.Offset(0, 2)
tbData3 = Product.Offset(0, 3)
tbData4 = Product.Offset(0, 4)
etc, etc, etc
I need the counter to increase every time a search is performed, at the moment it only does one count, no matter how many searches are performed.

What do I need to add to the counter part of the code for it to increase by 1 every time?

View 9 Replies View Related

Out Of Memory - Is My User Form Too Big

Jun 3, 2009

I have recently just encountered a problem where whenever I try and run / edit any part of my user-form code i get the following error:

Compile Error:

Out of memory

The help document then lists about 12 things that could cause this.

My user form code is very small, however the form itself is large, it has a multipage with 12 tabs, each tab then contains between 50 and 100 labels which populate with data from the spreadsheet in the background.

Do you think this size could be causing the error? If not, does anyone have any solutions / ideas?

My hardware / software setup is all ok.

View 9 Replies View Related

Updating Through The User Form

Nov 23, 2009

I have a user form that places data in the proper place, although I don’t have a way to update this data at a later time, other than going to the row and scrolling through the columns that need to be updated, of course my boss really doesn’t want to look at row and columns.
What would be cool is if the user could select a row by double clicking the row number so as to highlight the row, I have a search function that they could use to find the proper row of data. Then have the data go back into the user form to either be changed or to fill in other textboxes that were left blank the first time. For instance, this example is about automobiles, the user wants to populate fields about MPG or repairs made at EOY.

Private Sub cmdAdd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Sheet1")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
'check for a Make
If Trim(Me.txtComboBox1.Value) = "" Then
Me.txtComboBox1.SetFocus
MsgBox "Please enter a Vehical"
Exit Sub..........

View 9 Replies View Related

Image In A User Form

May 27, 2006

I am trying to put an image on a user form for the first time and am unsure how to do this. Is there a way to cut and paste to the userform?

View 2 Replies View Related

Populate User Form

Jan 16, 2007

I have created a user form for which I would like to do the following:

1)Select Last name using a combo box and with this all other fields should be automaticallu populated

2) If I make a change on the user form, it should update the relevent cell as well

All data is in the sheet 'Staff'

View 7 Replies View Related

Placing A User Form

Apr 11, 2007

I have created a user form to enter data into a spreadsheet. The spreadsheet has 6 columns:

Project number - Team Lead - Client, Budget - Comletion date - latest activity. Example:

#2343 - John - Xerox - $230,000 - Aug. 26, 2008 - Jan 1, 2007: Budget has been approved

#2445 - Michel -ABC Inc - $26,000 - July 7, 2007 - Jan 22, 2006: Budget has yet to be completed, awating input from Engineering

etc

The first 5 collumns are stagnant, and will never change throughout the project. The only one that will be updated on a weekly basis will be the "latest activity" collumn.

So in week 2 the above 2 projects would look like this:

#2343 - John - Xerox - $230,000 - Aug. 26, 2008 -
Jan 23, 2007: Materials under study
Jan 1, 2007: Budget has been approved

#2445 - Michel -ABC Inc - $26,000 - July 7, 2007 -
Jan 23, 2007: Budget approved
Jan 22, 2006: Budget has yet to be completed, awating input from Engineering

(however the activity would be on the same row as the rest of the info)

The latest activity (in the example they are dated Jan 23) are what I am looking to control by using the userform. On the user form there are 2 textboxes, 1 for date and the other for the "latest activity:" text. Once the user completes the 2 textboxes on the userform, they click a button, and the new information should be entered in the same cell as the previous activity, but on a different line and above the last activity.

It simply to maintain some sense of order in the activity area of the report. As various users fill in this section, they all do it differently....(each use a different date format, some hit alt-enter to get to the next line within the same cell, some just att to the end, some put in the mnext cell etc) and by the time it gets back to me it is a mess, and I have to spend a day tidiying it up.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved