Dynamically Add Controls To User Form Macro Code
Apr 9, 2008
I am trying to dynamically add controls to my user form based on some values in my cell. I am successfully able to create a text box dynamically but my label is not getting displayed. here is my code
Private Sub UserForm_Activate()
On Error Resume Next
If (ThisWorkbook. Sheets("Sheet2").Cells(1, 8) <> "FALSE") Then
Dim ctl As Control
Dim ctl1 As Control
Set ctl1 = Me.Controls.Add("Forms.Label.1", ctl1, True)
With ctl1
View 9 Replies
ADVERTISEMENT
Sep 4, 2008
Is it at all possible to create a User Form where the number of CheckBoxes will be linked to the number of entries in a cell range?
For example I have a 3 records in the range A:A called "Blue", "Green", "Yellow". I want to have a user form with 3 CheckBoxes with the same caption names.
View 9 Replies
View Related
Nov 14, 2008
I'm playing with simple UserForms to get the hang of VBA. I was trying an example for the help files (Using xl2K), and this isn't working. My first challenge was figuring out that I needed to 'create' a UserForm to begin with.
View 2 Replies
View Related
Jun 24, 2006
I have created a custome User Form with three option buttons inside a frame. How do I set the value for each button and then how do I pass that value back to the code that opened the form (after closing the form upon a selection?
Sub Test2()
UserForm1.Show
Select Case List
Case 1
Range("b1").Value = "List 1"
Case 2
Range("B1").Value = "List 2"
Case 3
Range("B1").Value = "List 3"
End Select
End Sub
in the form I have the following code associated with each of the butons (but I do not think I have it right). Isn't there a way (becasue I have them in a frame) to shorten the code?.................
View 8 Replies
View Related
Jun 9, 2009
find a VBA Code for fliping images in a User Form. What I want is that, I have a user form in which I have a command button "Next" & "Previous". I want whenever I click "Next" button my image control should show the next image & whenever I click "Previous" button my image control should show the previous image. I tried many logics but failed. Might be you guys will crack this hard nut.
View 7 Replies
View Related
Jan 21, 2010
I really don't know how to code a checkbox correctly. On the sheet, I have a form with CheckBox1 and Checkbox2. I would like Checkbox2 disabled until Checkbox1 is checked. Also, when Checkbox1 is checked, display Image1, otherwise Image1 is hidden. When CheckBox2 is enabled and checked, display Image2, otherwise Image2 is hidden. I know this is real beginner stuff, I'm still a rookie.
View 4 Replies
View Related
Apr 19, 2006
i have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
View 3 Replies
View Related
Nov 29, 2007
I am working on a dynamically produced userform but the dynamically created Cancel and OK buttons don't work. I have been able to get round it by adding the buttons to the top of the form (non- dynamic) but I'd really like to be able to create them dynamically based on variable for other parts of the project. How can I produce dynamic command buttons that actually work?
Here's my code but I'd be happy with generic code I could use.
Private Sub UserForm_Activate()
' Define variables
Dim LabelV As MSForms.Label
Dim CheckboxV As MSForms.Checkbox
Dim rngFields As Excel.Range
Dim field As Excel.Range
Dim lngNextTop As Long
Dim lngTitleBarHeight As Long
Dim ColumnNum As Integer
' Set constants
' Choose height and width of Label box
Const cTextBoxHeight As Long = 12..............
View 9 Replies
View Related
Oct 24, 2007
I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet
http://www.srfl.ca/userform.htm
View 9 Replies
View Related
Oct 10, 2006
I have somecode that scan column "A", and add dynamically "TextBox" Control according to some condition.
How to add event on dynamically created controls?
Private Sub btnSubmit_Click()
Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
For Each rng In Selection
View 9 Replies
View Related
Apr 5, 2007
Is it possible to dynamically add or remove controls on an Excel userform using VBA? Doing this before the userform is displayed would be great.
View 9 Replies
View Related
Mar 4, 2009
I have a userform with a single blank multipage. At runtime additional pages are added, the number of pages depends on input from another userform. Six frames, containing labels, textboxes and comboboxes are then added to each page.
I need to be able to use the textbox and combobox change events of these dynamically created controls to perform lookups and calculations. Although I can name the controls at the time they are created, it is not feasible to write code specifically for each control (I can have over 1,600 text boxes distributed over 9 pages, for example).
Having searched for some time on how to achieve this I believe using a class module is the way to go. However, how to use a class module is just not sinking in I'm afraid.
HTML Private WithEvents mpTextBox As MSForms.TextBox
Private WithEvents mpComboBox As MSForms.ComboBox
Private Sub Class_Initialize()
Set mpTextBox = MSForms.TextBox
Set mpComboBox = MSForms.ComboBox
End Sub
Private Sub mpComboBox_Change()
MsgBox "ComboBox value has been changed."
End Sub...........................................
View 2 Replies
View Related
Jun 17, 2009
I've made a user form and have it entering my data to "Sheet1". How do I get a macro that I already have in module1 in the same wookbook to be ran on "Sheet1" after the user clicks cmd1button. I've tried putting the code from the macro inside the user form with an if statement checking for true on optionbutton1 but it just skips the code. I know it goes to the end because my code to clear the user form values is at the end and it's clearing the form of all values. I can't find the proper way to call a macro inside the user form either.
View 9 Replies
View Related
Apr 20, 2008
This code create a userform on the workbook opening .I'm having problems with
1. Closeing the Visual basic window after this procedure runs
2. Being able to use the create userformstext box value in other procedures
3. how to delete the userform on close
Sub AddUserFormInputRequest()
Dim objVBProj As VBProject
Dim objVBComp As VBComponent
Dim objVBFrm As UserForm
Dim objChkBox As Object
Dim x As Integer
Dim strCode As String
Dim firstLine As Long, SecondLine As Long
Set objVBProj = Application.VBE.ActiveVBProject
Set objVBComp = objVBProj.VBComponents.Add(vbext_ct_MSForm)
With objVBComp
. Name = "InputRequest"
. Properties("Width") = 200
.Properties("Height") = 100......................
View 6 Replies
View Related
Sep 22, 2006
Is it possible to have a user form command button perform link or steps that are recorded with macro recorder? I am trying to reformat cut and paste a xls raw data file. I am trying to keep my file uploads to a min., but can upload an example if necessary.
View 4 Replies
View Related
Oct 31, 2012
I'm using below code for creating check-boxes dynamically on a form:
Code:
Do
Set cb = Me.Controls.Add("forms.checkbox.1", "Cb_" & option_counter, True)
With cb
.Left = 100
.Top = 100 + height_diff
.Caption = Sheet1.Cells(quest_num, option_counter + 1).Value
End With
height_diff = height_diff + 30
option_counter = option_counter + 1
Loop Until option_counter = total_options + 1
It is working fine.....Now after this, I want to check which are the chechboxes whose value is true. How do i do that?
View 4 Replies
View Related
Jun 3, 2006
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
View 7 Replies
View Related
Feb 9, 2010
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
View 2 Replies
View Related
Jul 25, 2006
I am trying to get the following routine to work. I need this formula to run dynamically when a user changes cell F27.
Sub PotentialUnitSales()
'Dim x As Range
Set Range("J27:J200") = "R[1]C[5]-(RC[5]-RC[3])"
'Range("J27").FormulaR1C1 = "R[1]C[5]-(RC[5]-RC[3])"
rng = Range([J27], Cells(Rows.Count, "J").End(xlUp))
End Sub
View 4 Replies
View Related
Jan 14, 2009
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
View 3 Replies
View Related
Dec 2, 2008
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
View 9 Replies
View Related
Nov 18, 2009
I have two linked ComboBoxes on a form. There are 10 Textboxes populated by ComboBox2’s choice. These controls are situated on two frame controls which are used for visual groupings only. I would like to clear everything except Combo1 when Combo1’s value is changed. ( Combo1 is a filtered key list using the dictionary. Script code)
I’ve written a small sub that is called to clear the textboxes, but its not reliable every time. It seems that if the scroll bar is used, and the user chooses Combo1 choice “NUTS/SEEDS”, the boxes aren’t cleared. In fact it will show the “Walnuts” info in Combo2.
View 4 Replies
View Related
Jun 8, 2007
Is there a short way to clear text boxes, check boxes and option buttons in one command. I dont want to delete them I want them to be able to accept more data once the operator has finished
View 9 Replies
View Related
Oct 24, 2007
I have form controls on my worksheets. How do I hide them? When I hide the row, the controls stay there. These controls don't seem to have that visible property like the VB control.
I'm thinking of using a validation->list instead, but then you don't see the drop down arrow.
View 9 Replies
View Related
Mar 12, 2007
I have 30 textboxes on my form, named "TextBox1" to "TextBox30".
When the user clicks the button to launch the form, I want to first hide all the textboxes (already done).
Then I want to loop from 1 to some predetermined number (between 1 and 30), and update the textbox whose name contains the number of the loop. For e.g.:
Sub ShowForm
Dim ctl
For Each ctl In frmKFF.Controls
If Left(ctl.Name,7) = "TextBox" Then
ctl.Visible = False
End If
Next ctl
View 4 Replies
View Related
Apr 28, 2014
I cant get this to work, it comes back with run-time error '424': object required
I am using form controls option button not activeX controls.
HTML Code:Â
Sub OptionButton12_Click()
If OptionButton12.Value = True Then Range("D14").Value = "Alamo"
End Sub
Sub OptionButton13_Click()
If OptionButton13.Value = True Then Range("D14").Value = "ERAC"
End Sub
Sub OptionButton14_Click()
If OptionButton14.Value = True Then Range("D14").Value = "National"
End Sub
View 4 Replies
View Related
Jul 21, 2014
When I put form controls onto a spread sheet is there anywhere I can easily see and access its properties? Format Control is lacking many values and I do not see them in the vba project toolbar. I am trying to get checkbox locations and checkbox numbers if possible. If there isn't an easy place to see these is it still possible to get the checkbox locations in VBA?
View 7 Replies
View Related
Jun 30, 2014
Imagine I have a form with a few controls on it. And the controls properties are set up at runtime.
Is there any way possible to save the property changes that were made at runtime to the controls themselves? I mean - short of manually editing all the controls at Design time?
This might be easier to explain by example. See dummy code below. Using this example - I want to find something that will save the Caption of CommandButton1 as "TestMe" (rather than have it only temporarily set at runtime).
View 2 Replies
View Related
Apr 26, 2008
Filling in a webform using the code below, works fine until I add a bit to set a Value to a field name that comes from a Radio Button. I'm presuming its because it doesn't actually select the Radio Button (as seen when I step through, you can see all the other values/fields update). Updates the page with all the other values correctly updated except for changing the Park Status.
With WebBrowser1
.Navigate NMCURL
Do While .Busy: DoEvents: Loop
Do While .ReadyState <> 4: DoEvents: Loop
With .Document.forms("CFForm_1")
.PageAction.Value = "Enter"
.SelectedCallID.Value = TicketNo
.lastactionby.Value = UserName
.ActionType.Value = ActionType
.Description.Value = Description...................
View 2 Replies
View Related
Aug 9, 2008
Im using information from oracle to do applications on excel. As im nothing related to IT department and I'm working on a BIG company, i did it by myself, i dont have support.
What i did is to investigate about oracleas (portal), then from my excel application i create the URL of the search i need, query it and paste on the document the table i need. I did this from months and worked great.
But now portal have been upgraded and need to do login before use it. I have some amateur knowledge about some HTML, PHP, CSS but i dont get how to fill the username and password for this new portal.
I will copy part of the code from portal that i think is the key:
<SCRIPT TYPE="text/javascript">
<!-- Comment out script For old browsers
Function setFocus()
{
document.forms[0].ssousername.focus();
};
window.onload = setFocus;
//-->
</SCRIPT>
<NOSCRIPT>
</NOSCRIPT>
<TABLE WIDTH="90%" BORDER="0" CELLPADDING="0" CELLSPACING="0">
<TR>
<TD>
<BLOCKQUOTE>
<BLOCKQUOTE>......
View 9 Replies
View Related
