I have a sheet with a list of suppliers, then under that, all the products we buy from them.
What I'd like is each time the word "Supplier" appears in column A, a new Tab is created with the value in column B as the title, then all the data under than copied until the word "Supplier" appears again.
[Code] .....
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
So I've got Sheet 1 with say
____A___B___C
1___m___i___c
2___r___o___s
3___o___f___t
I would like to create a button that can create a new sheet and paste A1 to C3 at the same location on the new sheet
and I need this to create a new sheet and do that everytime the button is pressed.....
Trying to create an excel chart to create totals based upon different keys. I
need to be able to calculate how many customers there are by Manager and then
By Rep. Then to figure out how many were New, Current, Total # of RSVP and
attended for that Rep. Below is how I have started but I am having some
problems getting certain parts. I know when I get one the rest will fall into
place. I can calculate how many total customers by manager and by rep just by
doing a Countif command but how do I determine the # of New, Current etc. Is
there a If Than command? Managers Totals are simply his reps totals.
Example..
A B C D E
F G
1 Manager Rep Customer New Biz Current # RSVP # Actual Attend
Need totals to look something like this....
A B C D E
F G
1 # of Cust # New # Current #RSVP #
Actual Attend
2 Manager
3 Rep 1
4 Rep 2
I found this really cool code that creates a tag cloud in Excel using VBA. It's far too complex for my understanding but I was hoping I could get some of the experts opinions on here about modification possibilities. I have attached the macro-enabled 2007 workbook. What I am trying to do is search through a list of keywords and determine each keyword's density within a list. The list for example could look like this:
slow windows xp
windows xp running slow
windows xp computer
[slow windows xp]
[windows xp running slow]
[windows xp computer]
[computer running slow windows xp]
"computer running slow windows xp"
"slow windows xp"
"windows xp running slow"
"windows xp computer"
You'll notice the characters " [ ] of which I would like to ignore when the cloud builds. The cloud would list the most dense keywords first, and gradually decrease to the least dense keywords. The macro code is inside the workbook but I'll list it here to:
I have a spreadsheet in which I want to extract or create two different columsn one will have the name of the store and the other will have the SKU item number. the way it is right both are on same column. I have attached a sample.
View 9 Replies View RelatedHere I am Attachiching a MHTML file which has multilayer in the left panel. If You Open it in excel u can edit it and navigate through the layers. I want to know can I create an excel file like this one.
http://rapidshare.com/files/235065073/howto.MHTML.html
OR
http://www.2shared.com/file/5865199/84c1fea5/howto.html
(sorry excel forum is not accepting mhtml file for attachment)
As you can see from the chart or picture. I want to create a =IF function signal so that on the right column it will show which of the hours is the top 20%/top 5 hours
Is there anyway possible in excel to do this? To create a signal on the right showing which of the days hours, is the top 5 hours with the highest volumne?
How to create a excel file with 0 KB ? Because when the user creates a new excel file, it is created with 9 KB by default. But when creating a word file its created with 0 KB. Why its happening ? I want to test uploading a excel file with 0 KB..
View 1 Replies View RelatedI have a large table with data, and I would like to have a box at the top, and when some types the name of city, then all records that have the city will come up. how to do it.
View 3 Replies View Relatedi want to create one user form like shown in this picture below. right side 3 options need to input form the user and clicking on the button get option chain, it gets the data from www and fills all the columns frm expiry to optn int..
View 2 Replies View RelatedI have an API that continuously gets stock price. The price appears in one cell at all times - let's call it A1
I want to record the value in a different cell every time it changes, so I can analyze the data.
so A1 = 15
B1 = 15
little later
A1 = 15.2
B2 = 15.2
I did some googling and came to a conclusion that I needed to write a macro.
I see that there is a function or event called Worksheet_Calculate()
Apparently it is supposed to do whatever when a value changes (per calculation)
How do I write a macro, and then execute it?
supposing i have column A which is vehicle number
and column b is fuel quantity
how to make in c automatic sum by vehicle number as i may have many entried in column A
example
vehno1 20
vehno1 21
vehno2 25.5
vehno2 40
vehno3 50
I have an excel sheet that will have a column with out of sequence numbers. I need a script that will evaluate each row and insert a row and the missing sequence. Below is the code I have written but I keep getting a compile error saying Else without If.
View 4 Replies View RelatedI want make a VBA code which can create a .txt file in a folder and if that file already exists it doesn’t overwrite that file.
View 4 Replies View RelatedI want to be able to create formulas where the output can act as the input.
For example, I tried to write a simple proof of concept script where you can convert between pounds and kilograms. So if you type in a value for pounds, it'll update the kilograms cell. And if you type in a value for kilograms - it'll update the pounds cell.
This is what I came up with:
Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....
I'm sure this is easy but I'm trying to create a for...next loop that goes across the row. My final output will be basically be to see if the cell says Saturday or Sunday and offset by 2 rows and highlight the rest of the column.
Code:
Range("A1").Select
For X = 2 To Range(Activecell, Selection.End(xlRight)).Column
Range(2, X).Select
ActiveCell.Value = "Column"
Next X
That's what I came up with but it doesn't seem to be right.
if it is possible to create a floating Tab like you get on websites, so ehwn you move the spreadsheet to the left or right, the tab/shape with words in moves with you.
View 8 Replies View RelatedCreate a macro that when ran will add 1 to the value of "Feeunits!AE1" In other words if the value is 10 then the macro will change the value to 11.
View 3 Replies View RelatedI need to create a web query.
I have lot of post codes which needs to be checked in a web page and the output column needs to be updated in the spreadsheet.
Link: - Find UK Postcodes Inside a Radius
for example: - The post code WD18 1TB will be there in Excel Sheet this has to be copied and pasted in the link in column
Step 2 : Click on map OR Place radius by location name or postcode
and Step 1 : Radius should be updated as 10 and then the Draw Radius needs to be clicked. Then the output needs to be copied (in this case the output is: AL2,HA1,HA2,HA3,HA4,HA5,HA6,HA7,HP3,UB9,WD1,WD17,WD18,WD19,WD2,WD23,WD24,WD25,WD3,WD4,WD5,WD6,WD7) in our spreadsheet in the next sheet.
In column A, I have numbers ranging from 0-6. In column B, I would like to create a "Y" each time there is a 1 or 2 in column A. How can I create an IF function which will create a Y for a 1 or 2?
View 4 Replies View RelatedIs it possible to create tabs within a tab? If so how?
View 1 Replies View RelatedI don't mind paying for the add-on/add-in, I need to have a chart displayed of 100 rows and 1000 cells of data.
View 6 Replies View RelatedI have a download from a customer contact database that has to be entered into another database. The first database has couples and business partners listed in the same record while the second database needs everyone to have their individual record.
For instance:
John & Mary Smith
1234 Main St
Mark Smith & Bob Jones
978 Park Ave
Bob & Carol & Ted & Alice Parker
343 East North St
Should be:
John Smith
1234 Main St
Mary Smith
1234 Main St
Mark Smith
978 Park Ave
[Code]....
There are some records with only one person listed, I just omitted them for simplicity. Is this possible? Or would it be more trouble that it is worth?
I have written a code for a function in VB editor in a sample excel sheet. The UDF is working fine, but I am not able to use it in every other worksheet. I need to give the code to my managers, so even they can use the function conviniently just from the formula bar. I had declared the function as a Public function, so I thought it will be accessible in other excel sheets as well but that doesn't seem to work.
View 7 Replies View Relatedwhy am I unable to create events on my worksheets? They were usually available to me when I selected "Worksheet" on the dropdown in vba.
When I open Excel, only "General" comes up in the drop down menu. What am I missing?
I would like to be able to have a macro, linked to a button, so that when you press that button it creates a new named sheet based on data in a particular cell.
I.e. There is a table with the following data:
Apples (A1)
Oranges (A2)
Pears (A3)
There are also the sheets Apples, Oranges & Pears.
You enter 'Grape' in cell A4, then when you press the button it creates a new sheet named Grape.
Also when a new sheet is created, the 'input cell', in this case A4, is moved down one so that when the next sheet is needed to be added, it doesn't just add the same sheet (i.e. in the example above, we don't end up with a new sheet named 'Grape' each time we click the button).
I have the following SQL: and I don't know how to have the VB Macro change the last parameter ((A_COMPL_SUMMARY.INCIDENT_NUMBER In (?))):
SELECT DISTINCT A_COMPL_SUMMARY.INCIDENT_NUMBER, A_COMPL_SUMMARY.CASE_NUMBER, A_COMPL_SUMMARY.PART_SEQUENCE, A_COMPL_SUMMARY.PART_NUMBER, A_COMPL_SUMMARY.LOT_NUMBER, A_COMPL_SUMMARY.ALERT_DATE, A_COMPL_SUMMARY.ENTRY_DATE, MDR_REPORTING.EVENT_DESC
FROM CHSUSER.A_COMPL_SUMMARY A_COMPL_SUMMARY, CHSUSER.INCIDENT_NOTIFICATION INCIDENT_NOTIFICATION, CHSUSER.MDR_REPORTING MDR_REPORTING
WHERE MDR_REPORTING.CASE_NUMBER = A_COMPL_SUMMARY.CASE_NUMBER AND MDR_REPORTING.INCIDENT_NUMBER = A_COMPL_SUMMARY.INCIDENT_NUMBER AND MDR_REPORTING.PART_SEQUENCE = A_COMPL_SUMMARY.PART_SEQUENCE AND INCIDENT_NOTIFICATION.INCIDENT_NUMBER = MDR_REPORTING.INCIDENT_NUMBER AND INCIDENT_NOTIFICATION.INCIDENT_NUMBER = A_COMPL_SUMMARY.INCIDENT_NUMBER AND ((A_COMPL_SUMMARY.INCIDENT_NUMBER In (?)))
I have a list from another worksheet that changes based off it's query results
Is there a way to have VB change the A_COMPL_SUMMARY.INCIDENT_NUMBER In .... to reflect a list found in the other worksheet?
to create a macro
the database just like pic in the link
[url]
and the report need to genarate out is like pic in the link
[url]
the part namber and the quantity on hand
if the a part number have the same location but not same lot/serial, then need to sumaries the quantity on hand if location is same.
and the
Location (Quantity On Hand)
20A13(31930),20B04(940).........
need to put in one cell
this is my table
[url]