I'm using the code below to create multiple sheets in a given workbook.
[Code] ......
The code works except for this line:
[Code] ......
What I'm trying to achieve, is to dispaly an 'Input Box' to allow the user to enter a date which will populate cell B3 in each of the created sheets. However, when I run this, although I can display the 'Input Box', when I enter the data, and click 'Ok', I receive a 'Run time' error highlighting this line as the cause.
Can i put into the cells B38-AF38, that would display the sum of B20:AF20 + B24:AF24 + B28:AF28 + B32:AF32 +B36:AF36 in a h:mm format.
When imputing the data into a cell in a h:mm format, I need it to display in that cell and formula bar the h:mm format without having to put an apostrophe in front of "h" or ":mm" value. Once complete, this form is going to go to other trainers to use on their computers and I dont think they would remember to keep putting an apostrophe before the data.
Example:
B20= 1:15 (1h15m) NOT 1:15:00 AM
B24= :30 (30min)
B28= :45 (45min)
B32= 1:45 (1h45m) NOT 1:45:00 AM
B38= 4:15 (4h15min)
I have attached a copy of the form for better clarification.
It doesnt seem to be complicated, but it's certainly a lot more than I thought.
I am looking for is VB code to firstly have a message box with an input box on (that bit i can do). The text and number put into the message box is then used to search the table for the information that relates to it.
The ideal would be for the code to find the data and then copy it either to the clipboard or to a section of the workbook.
The tables I am searching can be put into which ever format is easiest. Below is an example table;
I am using the built in moving average function to calculate the moving average of a set of numbers. There are a few things that i would like to do.
First i would like to have the last result displayed in a single cell. Then next to that cell i would like to have a cell that would specify the period of the moving average. I would like to be able to change the period in that cell and have that change it in the actual function. And finally i would like to have the moving average in a chart that would also change its period once that is changed in the respective cell. I realize that this might need some VB coding which i am currently learning.
Can anyone tell me if its possible to input some ones initials into a cell and when you hit enter, their full name is displayed instead of the initials:
ie input FB and the same cell displays Fred Bloggs?
I'm writing a macro that will automatically change the display in a column of cells.
The input in the cell would be a decimal value, (e.g. 1, 1.25, 1.5, 1.75, 2). As of now, I think the only input options are whole numbers and 1/4, 1/2, 3/4 fractions.
After inputting the decimal value, the cell should update to display the value as the following string format :
Input: 1.25 Displays: 1-1/4"
The purpose being to enable fast data entry while displaying in the desired format.
Here is where I know to begin for the automatic update:
Code:
Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False ' ' 'Code ' ' Application.EnableEvents = True End Sub
I am trying to display number of lines which depends on value pass by user. Actually user is passing some value. on which some group of lines has to be display.
eg for 1 value 9 lines for 2 value first 9 lines + another 9 lines for 3 value first 18lines + 9 lines and so on till 52.(this 9 lines are set of some column and rows)
1) Can a userform procedure be place in the midst a larger macro, so that it can get input from the user before running the rest of the macro? ie If the user leave the input field blank, the macro will exit will a msgbox.
2) I have a range(A1:A3) that i want my userform to display. This range is dynamic. The user will require to input the corresponding country next to it. how do i code the this? I will need to use a listboxes and textboxes right?
for example: userform shows city on the left, user will need to input the country on the right.
A1 - California (user input on the right) A2 - Shanghai (user input on the right) A3 - Mumbai (user input on the right)
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1) Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
I have two cells, A2 and B2. When I enter a numeric value into B2, I want it only allowed when certain text values are in A2. I.E.: Allow any value in B2, but only if A1 is either "SYDN or "ADEL".
Now using info found in an old post, I can achieve this with a combination of data validation and code: =OR(A2="SYDN",A2="ADEL") for the validation and for the code:
[Code] ......
The only problem is I also need to reset B2 if A2 changes to invalid data as a result of some other input to that cell (A2). In other words if B2 is showing "1" already and A2 were to change from "SYDN" to say "LOND", then B2 needs to be cleared. If A2 changed to "ADEL" then it doesn't need to clear but it is ok if it does because it is fine to re-enter "1" into B2 again.
I have attempted to attach a sample worksheet : Xl0000003.xls‎
Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
I want to be able to see the average rating for each employee.. Is there a way to put in the rating from one survey and have it automatically add it another cell and then have it clear the first cell?
Here is an example of what I would like to do: Say we get 2 surveys with one rating of 5 and one rating of 10... If I input the 5 into cell Q4 and have it automatically put into cell R4 and then it gets deleted from Q4 but saved to R4... and then I can add the rating of 10 to Q4 and it automatically ads it to R4 and clears Q4 and totals R4 to an average of 7.5.
This way, with each new survey I can just input each rating to Q4 and have it cleared for the next rating and then have an average rating of all the surveys in R4... we do not need to keep track of how many ratings we are getting, just the average rating.
I have attached the excel sheet if you would like to take a look at what I am trying to do..
I get a text file daily for routed deliveries containing a barcode, name, address and phone number that I convert into csv and then upload it into a route optimization software. after optimization is complete it has assigned packages to drivers and I export it to excel and print. My sorters are having a difficult time reading the addresses on the packages and assigning them to the proper driver, so I am trying to come up with a way.
My idea is that I can import the barcode as a custom field into the route optimizer and then when I export it, that barcode field will still be associated to that order. I want to scan the barcodes of the package into column C which will reference all of the barcodes in B and when it finds the match, it will return the value in A, the driver assigned to that particular package. This way my sorter will just have to scan the packages and throw it into the proper bag for the driver instead of having to visually scan the printed manifest to match.
I'm trying to work out the way of having a cell give a result based on what has been input into two other cells.
Basically I'm doing up a risk management spreadsheet. I need to have in one cell the LIKELIHOOD of an incident, in the second cell, the CONSEQUENCES of it happening and ending up with a RISK MANAGEMENT ASSESSMENT in the third cell.
I want to tie the values of some cells on Sheet 2 to what's put in into corresponding cells on Sheet 1. Example
If Cell B3 on Sheet 1 has the string "B off" put in, Sheet 2 should automatically get "R1" in cell B12, "B off" in cell C12 and "ID123456" in cell D12. If cell B3 on Sheet 1 is empty, B12:D12 should be blank.
I have two coloumns on a worksheet. In the first column I have data validation drop down list. I want to be able to: if the first column "Other" is chosen then the next cell will allow text for description, if anything other is chosen in the first drop down list cell then I want the next ( text for descritption ) cell to be resticted.
I have Quote Master.xls open I have a value in AA1 that carries a number I want to open Quote Log.xls I want to find the cell in Column A (Quote Log.xls) that AA1 (Quote Master.xls) directly corresponds to I want to offset from that found cell 3 cells to the right and insert from T7 (Quote Master.xls) into this offset cell. Here is the code so far
Private Sub InputIntoQuoteLog7_Click()
Dim CostSheetBook As Workbook Dim QuoteLogBook As Workbook Set CostSheetBook = Workbooks("Quote Master.xls") Set RFQQNumber = CostSheetBook. Sheets("RFQ").Range("AA1") Set RFQQStartDate = CostSheetBook.Sheets("RFQ").Range("T7")
Workbooks.Open ("\ACT3ENGVAULT EngineersLsheriffDocuments (2008)Quote System MashQuoteLog.xls")
I have 2 problems relating to LOOKUP. Not sure if Excel can perform these calculations as they could get to complex.
Problem 1 Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes) AB Bob1 Jon2 Fred3
Tab 2 (Dynamic, changes each week) AB Jon Fred Bob
So it would work as follows. Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week Example.
Week1 1Jon 2Bob 3Fred
Week2 1FredUp 2 2BobNot Moved 3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I am trying to work out how I can make an input box pop-up every time a cell in between the range of AU12:AU3000 is clicked on. The user will need to input two numbers, the lowest number needs to be copied into column BG (in the same row).
I would like to auto populate a cell (A2) due to the input results from another (A1). For example, if I enter A1 with "100%" then I want A2 to auto populate with "Complete". And just the same for other percentages; if A1 was input with any range from 1% to 99% it would populate A2 with "In Progress". And if A1 was to equal 0% then A2 would be "Not Started".
my spreadsheet to return the word unit if cell a18=1 or the word units if its over 1 but i also want the cell to remain empty if there is nothing input into cell a18 is this possible
I have a table of data for items, and in one column I have links that go to webpages for those items. I need to pull the value from a particular cell and input that within a text link in another cell. For example:
A1 has the value "K111"
in D1 I need to have a link such as "<a href="http://link/K111>Click Me></a>"
You'll notice it's link with the K111 value input in it. I need to replace the K111 code that will put the value there. I know how to do this normally but not when it falls within other text. Is this possible?
