Pull Value Of Cell And Input In Another Cell That Has Text In It Already?
Feb 24, 2014
I have a table of data for items, and in one column I have links that go to webpages for those items. I need to pull the value from a particular cell and input that within a text link in another cell. For example:
A1 has the value "K111"
in D1 I need to have a link such as "<a href="http://link/K111>Click Me></a>"
You'll notice it's link with the K111 value input in it. I need to replace the K111 code that will put the value there. I know how to do this normally but not when it falls within other text. Is this possible?
View 1 Replies
ADVERTISEMENT
Feb 28, 2007
I am just starting to get my feet a little damp with VBA and I am trying to make a macro that will act whenever any text is entered in any cell within a 3x3 square. Whenever any text is entered in any of those cells I would like it to enter a text ( "X" ) in a cell which is specified by a cell in the spreadsheet (this cell will output which cell the macro should write the text in in this format "A:1" or "C:3"). How can I make the program act only in reaction to the user entering thier text, and also, how can I get the macro to read A:1 and enter the text into that specific cell? Any help would be so awesome, the book I have is really difficult to navigate.
View 9 Replies
View Related
Jul 2, 2007
I need to find text within middle of a string.
Character before required text is say AAA
Character after required text is say BBB
Text required can vary in length.
Extract text and place in another column.
All text in a single column, required text not in every line. but
does repeat.
View 9 Replies
View Related
Jan 29, 2008
I have two coloumns on a worksheet. In the first column I have data validation drop down list. I want to be able to: if the first column "Other" is chosen then the next cell will allow text for description, if anything other is chosen in the first drop down list cell then I want the next ( text for descritption ) cell to be resticted.
View 4 Replies
View Related
Aug 8, 2007
Consider the following:
Cell A1 has this text in it:
WT*495*001559369~G3**D1234567**XX**20070626*1740****DHLC*20070807~B4G*RX*1~C32*UDD**UAD~ITQ*05*3****20030711*12~N1*FF*LALALA*25*00802109480~N3*12A46 KRESSASLE
Is it possible to somehow filter, search, find, etc, and basically clean cell A1 so that in the end it has just G3**D1234567?
I made a search macro, but the problem is there is so much text that it takes 2 seconds per cell to do a find. There are 6 columns with 65000 rows. I assume if I clean up each cell and do a "xlWhole" instead of "xlPart" in the find code, it will be much faster.
A1 = WT*495*001559369~G3**D1234567**XX**20070626*1740****DHLC*20070807~B4G*RX*1~C32*UDD**UAD~ITQ*05*3****20030711*12~N1*FF*LALALA*25*00802109480~N3*12A46 KRESSASLE
Result:
A1 = G3**D1234567
Possible?
Note that all rows do have a "~G3**" before the actual number I am doing a search for.
View 5 Replies
View Related
Feb 2, 2009
I have a column of cells that contain a long string of characters....I need to pull out text from this string and put it in subsequent columns. The symbol I am concerned with is >> For example.
If this string is in the first cell in column A:
>>abcd>>defgh>>ijkl
I would want a formula to return abcd in column b, defgh in column C, and ijkl in column d. >>this is a test>>make it work. in this example I would want "this is a test" returned in column B, and "make it work" ruturned in column C
View 3 Replies
View Related
Jul 10, 2014
Is it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
View 6 Replies
View Related
Jun 24, 2009
how would I go about pulling the three sets of numbers out of the following example:
Detected 2 resets. Imported 16 out of 22 bookmarks.
These sets of numbers could be single, double, or triple digits. I need to find the percentage from the second and third set of numbers in the long run.
View 7 Replies
View Related
Feb 4, 2008
I have about 5000 email addresses located in about 5000 different text areas, some of the text areas also contain 2 email addresses. How could I pull/extract the email addresses out only into its own list? Example;
The lines around the text block represent a field such as A1. Note all the text is contained in box A1.
_______________________
{ Name: Joe }
{Address: 123 Blow St } A1
{Email: Joe123@sam.net }
_____________________
{Name: Jan }
{Address: 124 Cat St } A2
{Email: J123@nbadd.net }
--------------------------
I need to just get the email addresses pulled out.
View 3 Replies
View Related
Jul 8, 2013
I am trying to figure E.g. when A1 is empty i want it to equal a text.
A1 has a text "Quote No" in it permanently until other text is put in
Purpose so that they people know where to enter the applicable text.
View 9 Replies
View Related
Jul 23, 2014
I am creating a series of charts that all include a text box containing "(N=[value])", with different values in each instance, but with each N value listed as a total frequency in each table. I am creating hundreds of these, so if there is a way to automatically pull the correct N value from a cell into the text box, it would make this faster. I have written simple functions in excel tables but have no experience with VBA/macros.
View 5 Replies
View Related
May 16, 2004
I need to pull a specific word from a string of text in a cell and have that word shown in an adjacant cell. For example A1 will contain the text "Smith Sun Alliance Pension Fund" I need B2 to show "Pension". I cannot use any filtering or text to columns as the word Pension can be anywhere within the text in A1 and I have thousands of entries. So I need a function.
View 9 Replies
View Related
Dec 25, 2009
i need away that will give me the way to pull data from specified place
in txt file to A1 cell in excel sheet3
View 9 Replies
View Related
Dec 31, 2013
I have the below code which creates a new template
Code:
Private Sub NewTemplate_Click()
Dim Tsh As Worksheet
Set Tsh = Sheets("TEMPLATE")
Tsh.Copy After:=Sheets(Sheets.Count)
shName = InputBox("Please enter new sheet name:")
ActiveSheet.Name = shName
Tsh.Visible = False
End Sub
What I would like to add to the above code is two more inputbox prompts, the first should prompt the user for a Name (text and length) to go into the new sheet cell A6. The the second input box should as for code, (number any length), to go into the new sheet cell b6.
View 3 Replies
View Related
Jan 8, 2010
I have a question about using the form input method for an inventory sheet.
My issue is that I want to have a column of cells have a predetermined text acronym "THS-"
I thought to place this in the column by copy pasting but then when I run the Form input for each row and column it gets errased.
View 9 Replies
View Related
Aug 22, 2014
I do data entry for a driveway company. I get addresses and phone numbers, and then call the people to offer services. I keep track of my calls on the spreadsheet, color coded for my results, green for leads, yellow for voicemail/no answer, and red for not interested.
I have formulas in cells M2 through M8 to give me my overall stats for the calls I have made, it filters them by color for leads, missed calls, and rejections, and a couple other stats (mostly for my own curiosity)
What I'm trying to add is the cells L10 to M13, I want to be able to input a date, for instance 8/15, and have it run the same stats, just for that day essentially. So, I need it to search the last 2 columns in the table for the text that I input into cell M10, and then run the color based formula on those cells, and total them up in the appropriate cells, M11, M12, and M13.
The 2 Stats tables are the same at the moment in the sample, as I only included one particular street that I have mapped, my actual table is nearly 3000 rows.
View 3 Replies
View Related
Jan 23, 2013
i was wondering if it was possible to move database entries from sheet to sheet using a user form ? any examples for this ?
View 1 Replies
View Related
Mar 24, 2009
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies
View Related
Nov 23, 2009
See attached worksheet for reference. Is it possible (while utilizing the same spreadsheet on a weekly basis) to zero a spreadsheet subsequent to its use. Importantly however, all relevant formulas must remain perfectly intact and will re-establish themselves once relevant data is placed inside an individual cell? In this case, as soon as a “Name” (or even a letter) is referenced inside the “Name” column: H10:H19?
In other words, the entire sheet is blank bar the top date and respective headings. Once any text is placed inside cells H10:H19, the formulas from the associated Row re-applies itself to the “Week-Start” dates, “Week-End” dates and references a default “Phone” amount for ‘$10’? The Data Validation formulas I’m sure would remain undamaged? This would prevent ‘text clutter’ (such as dates extending to the bottom with no apparent referencing or connecting information?
View 2 Replies
View Related
Jun 24, 2013
I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).
I attached an image diagram that may better represent what I am trying to do.
View 9 Replies
View Related
Aug 16, 2013
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
View 4 Replies
View Related
Dec 30, 2013
I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
View 3 Replies
View Related
Aug 1, 2014
I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.
Keyword Range.xlsx‎
View 5 Replies
View Related
Feb 26, 2009
I have many workbooks which all have a summary sheet called summary, and which are all kept in the same folder (although this folder name/filepath may change from year to year).
I want to be able to set up the column headings and then copy the same set of summary information from each book so that it can then be used for analysis. The cells to be copies derive their value from formulae, it is the value that needs to be copied.
I attach a workbook with the format needed and the source cells. The source sheet will be password protected.
I know this is a question that has been raised before and I have searched the forum but not come across a question that is close enough to work from - my VB skills are appalling.
View 14 Replies
View Related
Feb 22, 2014
I have a spreadsheet with 5 columns. A1 to A5
Entries are made into columns A2 to A5 but only ever one entry across all cells
If an entry is made into A2 to A5 the I need a "P" to be placed into A1
View 4 Replies
View Related
Jul 24, 2014
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
View 9 Replies
View Related
Jun 8, 2014
I would like to know if it is possible to transfer values of cells this way?
I've attached the excel file for easier reference.
View 3 Replies
View Related
Sep 19, 2008
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
View 9 Replies
View Related
Oct 7, 2008
The workbook will consist of at least two pages:
1. A user input page
2. A records page
On the user input page, there will be two fields to enter information in... one for an exact address (ex: 600 n. nowhere) and one for a casual address (ex: On Nowhere street south of Anywhere Blvd). On the records page, I'm going to keep all the addresses and their corresponding casual addresses so that in the future, I don't have to keep inputting both.
What I'm looking to do is have a formula/function/vba code check the exact address against my records for it already existing -- and if so, pulls the corresponding casual address. For example, if last week I entered 600 n. nowhere and then transferred it into my records and then this week, I again entered 600 n. nowhere, the workbook would find the record and place the casual address for me.
View 2 Replies
View Related
Jul 22, 2012
I have a fairly static web address that has a number of pictures:
ie: [URL]...
I would like to create a user form that has one txt box where a number such as the above 24523310 could be entered. When the sub is run it would extract the image at [URL].... and put it in the spreadsheet. I have a list of all of the different #'s so if I could simply create a user form that I could input the number it would prevent me from going to the web, copying and pasting different images over and over again. The image would need to appear in Column A.
View 2 Replies
View Related
