VBA Userform - Select Months To Apply To Autofilter
Nov 15, 2011
I have a userform that allows you to select months to apply to an autofilter, In the code below ComboBox2 is the beginning Month, and Combobox5 is the last month in what I want to be a range of months. I need it to account for the months inbetween. Currently using my code it only selects the 2 months, not those inbetween.
Code:
Private Sub RunButton_Click()
Unload DataReport
Rows("1").AutoFilter Field:=24, Criteria1:=Me.ComboBox2, Operator:=xlOr, Criteria2:=Me.ComboBox5
Call Filtered
Call AMasterBuild
End Sub
View 6 Replies
ADVERTISEMENT
Jul 17, 2009
I'm working on an excel sheet to display technical problems in an office. I want to use a filter in order to not display problems that were resolved (by applying a filter to show only "0" on the "problem duration" column that displays "hours problem was up after solved" and "0" if not solved) as the point is to display only non-resolved issues.
I wanted this filter to be re-applied constantly, meaning once I fill the time and date it's solved and the formula calculates the time it was up, this row will automatically vanish due to the filter applied.
I found this thread on your site Refresh Autofilter Automatically from the resolved problems so we need to remove the filters once in awhile. With this after the filter is removed, you cannot setup a new filter at all (it just doesn't seem to allow you, erasing it after it is being applied). I need to not only be able to setup a new filter, but also that this new filter will be reapplied automatically all the time (temporary disable of a filter is also an option, but I do not know whether it's possible).
I do have Excel 2007 on Vista, but I also need this to work on Excel 2003 with XP.
View 9 Replies
View Related
Apr 30, 2008
I have to create autofilters dynamically on x columns based on the selection I make. I created this code but is not working.
LastColumn = Cells. Find(What:="*", After:=[A1], _
SearchOrder:=xlByColumns, _
SearchDirection:=xlPrevious).Column
Range(Cells(17, 1), Cells(17, LastColumn)).Select
With Selection
.AutoFilter = True
End With
View 2 Replies
View Related
Sep 4, 2012
I've recorded an Excel macro to AutoFilter a selection and set criteria. This will work fine for this set of data but the number of rows will vary from month to month.
How can I modify this macro so that the range will automatically recognize changes in row length?
Code:
ActiveSheet.Range("$A$9:$L$7958").AutoFilter Field:=12, Criteria1:="TRV"
View 5 Replies
View Related
Sep 4, 2009
I have a workbook that uses Autofilter.
Column A has data. Column B is hidden, has no data, and is empty.
Colmn C has data, on through the rest of the sheet (to Column AB).
Why column B has no data is unimportant for now. It, however, must maintain its existance and cannot be deleted.
When I select the autofilter sort button on column A, it selects only that column, and not the rest of the sheet. Data is subsequently scrambled.
When I unhide the empty column B and select the sort button on column B, it selects the entire sheet. Data remains intact.
When I select the sort button on column C, it selects the rest of the sheet, but not column A (with data), or B (with no data). Data is subsequently scrambled.
View 5 Replies
View Related
Aug 24, 2004
I intend to create reports from a master sheet.
The master sheet contains company information; each row represents a (company)record.
The first column contains the country code where the company resides, e.g. DE.
I dug up this piece of
For i = 12 To 1 Step -1
Set rngAutoFilter = Cells(1, i)
rngAutoFilter.AutoFilter Field:=1, Criteria1:="DE"
Range(rngAutoFilter, rngAutoFilter.End(xlDown)).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Worksheets("Sheet2").Cells(1, i)
rngAutoFilter.AutoFilter
Next i
I found this code to work allright but, it only copies the singel cells containing "DE" and the topfirst row. At least that is what is the visible result.
How do I modify this code to copy EACH complete row containing "DE" in the first column?
View 9 Replies
View Related
Jan 20, 2014
I need a formula to automatically change the summary column according to the month we are in.
Ie:
Last Months Data
Nov
Dec
Jan
Feb
1
8
1
7
4
7
9
2
9
'Last Months Data' column should show Dec. However, as we move into February and I complete the 'Jan' column, I would like 'Last Months Data' to automatically change to show Jan's data - is this possible?
I was previously told to use the following formula but this would automatically select the current months data and not the previous months data which is what i need - =INDEX(B2:L2,MONTH(TODAY()))
View 2 Replies
View Related
Aug 7, 2013
I need a vb code which would open different workbook automatically, autofilter the first row and select data and copy and paste in the other workbook.
View 1 Replies
View Related
Jan 14, 2007
I have a workbook with 2 sheets I want to make an autofilter by two method :
- select case statement
- two dates
View 4 Replies
View Related
Dec 17, 2012
I'm designing a form to look at data contained on a spreadsheet. I aiming for the user to select filter criteria which will then be used to reduce the data based on the criteria selected using autofilter. How can I set the filter criteria using a form to give the same options as when you manually select the filter using the arrows at the top of the row? Can I get the filter selections into a list box?
View 5 Replies
View Related
Aug 5, 2014
I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
View 2 Replies
View Related
Jul 11, 2007
I have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
View 14 Replies
View Related
Jan 10, 2012
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
View 1 Replies
View Related
Jun 13, 2008
I have found codes to do this however not one to show if I have varied selections. I have 3 combobox's and 2 textbox's to autofilter data on the same page. can someone tell me where I am going wrong in my code.
Private Sub CommandButton1_Click()
With ActiveSheet
.AutoFilterMode = False
If Me.ComboBox1.Value = True Then
With . Range("B2:S2")
.AutoFilter
.AutoFilter Field:=2, Criteria1:=Me.ComboBox1.Value
End With
End If
If Me.ComboBox2.Value = True Then
With .Range("B2:S2")
.AutoFilter
.AutoFilter Field:=4, Criteria1:=Me.ComboBox2.Value
End With
End If........................
View 7 Replies
View Related
Dec 10, 2012
Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
View 2 Replies
View Related
Dec 6, 2013
I have a date column (Column E: Date Entered) on my spreadsheet that I need to set conditional formatting on. There are two conditions:
1) 18 months from the date in the cell needs to be highlighted yellow
2) 24 months from the date in the cell needs to be highlighted red
View 6 Replies
View Related
May 14, 2007
I have bug with the code below
rstClient.Open "select * from clients" & "where category=cboCategory.value" And "postcode = cboPostCode.Value",strConnectionString, adOpenStatic
fyi:if i select * from clients without where, all will run good. so i think it is only this part problem.
cboCategory is the combobox which is used to select category, and the same for postcode
View 6 Replies
View Related
Jul 19, 2009
Cell A1 is a past date. In cell B1 I would like how many months have gone by since todays date. eg. Cell A1 = July 07, B1 would = 24 months.
View 3 Replies
View Related
Jul 31, 2007
I am looking for a formula that will add months and return the year. E.g. if I add 1.05 and 1.07 I should get 3.01. i.e. 3 years and 1 month.
View 9 Replies
View Related
Jul 31, 2014
My question is - for a Ref range in the user form, I want to set it up to only be able select from column A B and C. ( it has select ABC column at the same time, if missing any column, error message will come out, or select out of this range, the error message should also come up. )
I know how to set the range to all three columns, but I know don't how to ask for " must select from all three column?"
View 2 Replies
View Related
Feb 12, 2014
I have a report and users will need to key in password while opening. Currently, i am using inputbox and it works exactly like what i expected. However, the only downside is that i cannot mask the password.
I am aware that I have to use userform to do so. How to replace the input box with userform and still deliver the same result.
I know how to create a user from with title, text box, OK and Cancel buttons, and that's it. How to put it in my current code.
Below are the codes that I currently have. There are 4 possible outputs.
[Code].....
View 14 Replies
View Related
Sep 2, 2013
I have a user form containing a drop down list and two text boxes. The drop down list contains at the moment 2 items (address 1 and address 2) I have two worksheets,1st named address 1 and 2nd address 2. So far I have it set up so that the information enter in to text box 1 and 2 plus whichever one of the address is selected from the drop down list is entered in to the next available blank row on the active work sheet. What I would like to achieve is when address 1 is selected from the drop down list all of information is added to sheet 1 in the next blank row, same for address 2, this would be enter into sheet.2
All of the above would run from a command button (Enter)
View 2 Replies
View Related
Jul 30, 2007
When my userform is displayed, I would like to have the input field preselected. It is the same as using the Shift-Home key.
I current ly use a shortcut ( Ctrl-M ) to select the sheet and display the userform, as in
Sheets("Select").Activate
Call Worksheets("Select").CommandButton1_Click
UserForm1.TextBox1.Select ' NOT correct
The last line does not work, but it was my stab at the problem
View 9 Replies
View Related
Oct 27, 2006
I am trying to get my Userform to open the Insert Picture Dialog
Private Sub CommandButton1_Click()
at a set Path
fPath = ThisWorkbook.Path & "Pics" & "*.jpg"
where the user selects the Picture to LoadPicture in Image1 control. No matter what I try I keep getting errors.
View 7 Replies
View Related
Jun 8, 2008
I have an appoinment calendar that is one month per worksheet
- Column headings 09:00 - 20:00
- Row headings 'days and dates of the month' (split into two merged cells of two)
****************See attachment 'Calendar Format.jpg'****************
I have then created a UserForm which has two dropdown combo boxes
****************See attachment 'UserForm.jpg'****************
What I want to do is have a way of using the dropdown boxes to select a column and row reference to enter the other data into the four lines in the outlined box area (see Calendar Format.jpg)
I want to be able to select a date - and to have only the dates from the sheet showing would be a bonus! - and have the script use that as its row reference, followed by selecting the time and having it add the column reference, and so selecting the correct cell to be able to then add all the other pieces of data.
I would just set it up so that it all worked by selecting the first cell, then adding, but I'm worried about other users not doing that and so causing things to be misplaced or overwritten!
I'm more than willing to change most things, but I do need to have those four pieces of info, and I only need to have a simple calendar.
If anything is not clear, please ask and I'll try to clarify further!
Forgot to add - In the pics I'm using 2007, but I want to be able to run this on 2000/2003 as that's what's in the offices and it's going to be shared on the server.
View 14 Replies
View Related
Jul 15, 2009
I have a sheet that inserts data into the next blank row. the offset 4 value is a date. Can i have it so when i click the date on this sheet it shows the userform.
what i cant get is how to do it since i dont know what row the date will be in.
View 2 Replies
View Related
Jan 19, 2013
user form that has a list box that only picks up visual worksheet (not hidden ones) and then allows the user to select which ones to print via check boxes.
View 5 Replies
View Related
Aug 8, 2008
I want a control to select a range in a userform I'm creating.
I wonder if we can use the same type of control the wizards use, where you click on the right and choose the range? Alternatively, what's the best option?
View 9 Replies
View Related
Apr 22, 2009
I want to be able to select and edit a range of data on a userform. I am trying to pull the information that matches a cell range (Named as Action) into the respective textboxes. But I have fallen at the first hurdle and can't even get that working.
View 2 Replies
View Related
Sep 10, 2009
I am trying to sum a dynamic range of values, clear the range (ie. clear the numbers on the spreadsheet), then place the sum of all the numbers in the last cell in the user selected range. (essentially adding all values selected, placing final sum in the last row of the range, and leaving no trace of performing the routine)
I want the range to be selected during the userform running (using showmodal = false). I can sum the selection and write the value to a cell, but I can NOT write the cell to the last value in the selection.
View 7 Replies
View Related
