VBA - Userform Worksheet Select
Sep 2, 2013
I have a user form containing a drop down list and two text boxes. The drop down list contains at the moment 2 items (address 1 and address 2) I have two worksheets,1st named address 1 and 2nd address 2. So far I have it set up so that the information enter in to text box 1 and 2 plus whichever one of the address is selected from the drop down list is entered in to the next available blank row on the active work sheet. What I would like to achieve is when address 1 is selected from the drop down list all of information is added to sheet 1 in the next blank row, same for address 2, this would be enter into sheet.2
All of the above would run from a command button (Enter)
View 2 Replies
ADVERTISEMENT
May 14, 2014
I want activation of userform to hide worksheet, but as soon as the Userform is closed, the worksheet should show.
I have attached file to aid.
View 1 Replies
View Related
May 14, 2007
I have bug with the code below
rstClient.Open "select * from clients" & "where category=cboCategory.value" And "postcode = cboPostCode.Value",strConnectionString, adOpenStatic
fyi:if i select * from clients without where, all will run good. so i think it is only this part problem.
cboCategory is the combobox which is used to select category, and the same for postcode
View 6 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Jul 31, 2014
My question is - for a Ref range in the user form, I want to set it up to only be able select from column A B and C. ( it has select ABC column at the same time, if missing any column, error message will come out, or select out of this range, the error message should also come up. )
I know how to set the range to all three columns, but I know don't how to ask for " must select from all three column?"
View 2 Replies
View Related
Feb 12, 2014
I have a report and users will need to key in password while opening. Currently, i am using inputbox and it works exactly like what i expected. However, the only downside is that i cannot mask the password.
I am aware that I have to use userform to do so. How to replace the input box with userform and still deliver the same result.
I know how to create a user from with title, text box, OK and Cancel buttons, and that's it. How to put it in my current code.
Below are the codes that I currently have. There are 4 possible outputs.
[Code].....
View 14 Replies
View Related
Jul 30, 2007
When my userform is displayed, I would like to have the input field preselected. It is the same as using the Shift-Home key.
I current ly use a shortcut ( Ctrl-M ) to select the sheet and display the userform, as in
Sheets("Select").Activate
Call Worksheets("Select").CommandButton1_Click
UserForm1.TextBox1.Select ' NOT correct
The last line does not work, but it was my stab at the problem
View 9 Replies
View Related
Oct 27, 2006
I am trying to get my Userform to open the Insert Picture Dialog
Private Sub CommandButton1_Click()
at a set Path
fPath = ThisWorkbook.Path & "Pics" & "*.jpg"
where the user selects the Picture to LoadPicture in Image1 control. No matter what I try I keep getting errors.
View 7 Replies
View Related
Jun 8, 2008
I have an appoinment calendar that is one month per worksheet
- Column headings 09:00 - 20:00
- Row headings 'days and dates of the month' (split into two merged cells of two)
****************See attachment 'Calendar Format.jpg'****************
I have then created a UserForm which has two dropdown combo boxes
****************See attachment 'UserForm.jpg'****************
What I want to do is have a way of using the dropdown boxes to select a column and row reference to enter the other data into the four lines in the outlined box area (see Calendar Format.jpg)
I want to be able to select a date - and to have only the dates from the sheet showing would be a bonus! - and have the script use that as its row reference, followed by selecting the time and having it add the column reference, and so selecting the correct cell to be able to then add all the other pieces of data.
I would just set it up so that it all worked by selecting the first cell, then adding, but I'm worried about other users not doing that and so causing things to be misplaced or overwritten!
I'm more than willing to change most things, but I do need to have those four pieces of info, and I only need to have a simple calendar.
If anything is not clear, please ask and I'll try to clarify further!
Forgot to add - In the pics I'm using 2007, but I want to be able to run this on 2000/2003 as that's what's in the offices and it's going to be shared on the server.
View 14 Replies
View Related
Jul 15, 2009
I have a sheet that inserts data into the next blank row. the offset 4 value is a date. Can i have it so when i click the date on this sheet it shows the userform.
what i cant get is how to do it since i dont know what row the date will be in.
View 2 Replies
View Related
Jan 19, 2013
user form that has a list box that only picks up visual worksheet (not hidden ones) and then allows the user to select which ones to print via check boxes.
View 5 Replies
View Related
Aug 8, 2008
I want a control to select a range in a userform I'm creating.
I wonder if we can use the same type of control the wizards use, where you click on the right and choose the range? Alternatively, what's the best option?
View 9 Replies
View Related
Apr 22, 2009
I want to be able to select and edit a range of data on a userform. I am trying to pull the information that matches a cell range (Named as Action) into the respective textboxes. But I have fallen at the first hurdle and can't even get that working.
View 2 Replies
View Related
Sep 10, 2009
I am trying to sum a dynamic range of values, clear the range (ie. clear the numbers on the spreadsheet), then place the sum of all the numbers in the last cell in the user selected range. (essentially adding all values selected, placing final sum in the last row of the range, and leaving no trace of performing the routine)
I want the range to be selected during the userform running (using showmodal = false). I can sum the selection and write the value to a cell, but I can NOT write the cell to the last value in the selection.
View 7 Replies
View Related
Oct 24, 2011
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
View 1 Replies
View Related
Nov 15, 2011
I have a userform that allows you to select months to apply to an autofilter, In the code below ComboBox2 is the beginning Month, and Combobox5 is the last month in what I want to be a range of months. I need it to account for the months inbetween. Currently using my code it only selects the 2 months, not those inbetween.
Code:
Private Sub RunButton_Click()
Unload DataReport
Rows("1").AutoFilter Field:=24, Criteria1:=Me.ComboBox2, Operator:=xlOr, Criteria2:=Me.ComboBox5
Call Filtered
Call AMasterBuild
End Sub
View 6 Replies
View Related
Jul 2, 2012
I current have code that fills in textboxes in a userform with values in cells:
Code:
Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")
[Code]...
How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?
ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor
View 4 Replies
View Related
Mar 10, 2013
How do I allow the user to select from a dropdown list but disallow them from entering value into the textbox?
View 1 Replies
View Related
Apr 1, 2007
I have a userform with 5 listboxes on the first page, each with multiple options. They are all set up so any number of options can be chosen.
2 are populated by the 'add item' method, and the other 3 pull data from 3 columns of the database when it's initialised to ensure all possible options are included.
My question is this - as there may be many options in each listbox to scroll through, if someone wanted to search on all the options in the listbox, it would be easier to have a 'Select All' option at the top, but I have no idea if this is possible, let alone how to do this -
View 9 Replies
View Related
Oct 12, 2006
Why is the below code not valid? I am using a userform with a cancel button and i cant it to copy and paste some lines on sheet Chart_Data as it unloads. But i just get the error
"Runtime Error '1004': Method 'Select' of object '_Worksheet' Failed"
Private Sub Cancel_Click()
Chart_Data.Select
Chart_Data.Rows("6:7").Copy
Chart_Data. Range("A4").PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Unload Me 'Cancels Operation
Exit Sub
End Sub
View 3 Replies
View Related
Jun 27, 2008
I would like to add a combobox type control that will allow multiple selections. I know that the combobox in the MS Forms Object Library only allows single selections and that the list box is the way to go to allow multiple selections, but I am trying to keep the form as small as possible. I would like to add a control similar to the one used on pivot charts, where the user clicks the dropdown box and can select multiple items. I'm hoping this control is installed with MS Office and just needs a reference to it, but I am open to installing third party controls as well.
View 7 Replies
View Related
Oct 24, 2011
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click()
Dim iRow As Long
Dim ws As Worksheet
[Code]....
View 2 Replies
View Related
Feb 6, 2009
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
View 7 Replies
View Related
Apr 6, 2009
I have very limited VBA skills and I have tried to get a vlookup working on a userform. I need data from a range selected in ComboBox1 to drop into Textbox1. I have tried but it doesn't work.
I also need if possible a button that pushes the result of TextBox1 to a cell and another button that allows the user to edit the TextBox1 value in situ.
View 13 Replies
View Related
Jun 18, 2012
So I'm creating a UserForm that takes user input to create a worksheet based on the values input. My question is: How to select a range of cells based on a variable input value? For example, it asks how many competitors there are, and the user can input 5, 8, 10, etc. So I want that many cells in Row 1 selected, whatever the value input is.
View 9 Replies
View Related
Mar 4, 2009
I have a userform which allows user to selected a date formt he calendar. In my code I name the value selected myDate. I want to have a line of code at the begginning of my code that checks if myDate = a date already listed in column H on a sheet named "all dor's". if it does match then a msgbox appear saying "date already entered" and the code return to the opened userform.
View 9 Replies
View Related
May 29, 2009
I have a UserForm that I want to use as a “Print Selection Page” using check boxes to make selection or multiple selections of pages to print from different spreadsheets but same work book.
View 9 Replies
View Related
Jul 14, 2006
I have made a simple procedure (which will extend to make something that I have to make but for time being) it asks user to select a chart type in a userform using option buttons and then the chosen chart type is taken as the chart type and makes the chart.
problem is that the typechart - variable to identify the chosen chart type - is not being recognised. Here's the coding, the variable is not passed (in yellow bolded) from one procedure to another?
Private Sub NextButton_Click()
Call ShowType
If bFlag = False Then
MsgBox "Not Selected"
Call ShowType
Else
Call MakeChart
End If
End Sub
View 5 Replies
View Related
Sep 22, 2007
A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
View 8 Replies
View Related
Apr 8, 2008
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
View 2 Replies
View Related
