I've recorded an Excel macro to AutoFilter a selection and set criteria. This will work fine for this set of data but the number of rows will vary from month to month.
How can I modify this macro so that the range will automatically recognize changes in row length?
Code:
ActiveSheet.Range("$A$9:$L$7958").AutoFilter Field:=12, Criteria1:="TRV"
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI have a workbook that uses Autofilter.
Column A has data. Column B is hidden, has no data, and is empty.
Colmn C has data, on through the rest of the sheet (to Column AB).
Why column B has no data is unimportant for now. It, however, must maintain its existance and cannot be deleted.
When I select the autofilter sort button on column A, it selects only that column, and not the rest of the sheet. Data is subsequently scrambled.
When I unhide the empty column B and select the sort button on column B, it selects the entire sheet. Data remains intact.
When I select the sort button on column C, it selects the rest of the sheet, but not column A (with data), or B (with no data). Data is subsequently scrambled.
I intend to create reports from a master sheet.
The master sheet contains company information; each row represents a (company)record.
The first column contains the country code where the company resides, e.g. DE.
I dug up this piece of
For i = 12 To 1 Step -1
Set rngAutoFilter = Cells(1, i)
rngAutoFilter.AutoFilter Field:=1, Criteria1:="DE"
Range(rngAutoFilter, rngAutoFilter.End(xlDown)).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Worksheets("Sheet2").Cells(1, i)
rngAutoFilter.AutoFilter
Next i
I found this code to work allright but, it only copies the singel cells containing "DE" and the topfirst row. At least that is what is the visible result.
How do I modify this code to copy EACH complete row containing "DE" in the first column?
I have a userform that allows you to select months to apply to an autofilter, In the code below ComboBox2 is the beginning Month, and Combobox5 is the last month in what I want to be a range of months. I need it to account for the months inbetween. Currently using my code it only selects the 2 months, not those inbetween.
Code:
Private Sub RunButton_Click()
Unload DataReport
Rows("1").AutoFilter Field:=24, Criteria1:=Me.ComboBox2, Operator:=xlOr, Criteria2:=Me.ComboBox5
Call Filtered
Call AMasterBuild
End Sub
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I need a vb code which would open different workbook automatically, autofilter the first row and select data and copy and paste in the other workbook.
View 1 Replies View RelatedI have a workbook with 2 sheets I want to make an autofilter by two method :
- select case statement
- two dates
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
How can I create a custom autofilter that will show me dates within 30 days of today in Excel 2003?
View 3 Replies View RelatedI'm wrinting a macro to copy specific data from a table. To do that I'm using a Autofilter and a list of criteria. The macros works fine for existent data, I'm mean, when the result of the filter is not null, but when the filter doesn't find a result, instead of clearing the filter range, it keeps the last valid. The result is a colapse and freeze the Excel. I'd like to know how can I reset or clear the filter range?
The code I'm using is:
Sub Filter_01()
'Definições preliminares
Dim rng As Range
Dim rng2 As Range
Dim ARLE
Dim filter_valid, filter_invalid As Variant
filter_valid = Array()
filter_invalid = Array()
'Criação do Arquivo de Destino
Caminho = "D:Documents and Settingscjcs.ABMeus documentosAutomaSIPPPlanilhas"
Nome_Arquivo = "Produtos_Tanques.xls"
Nome_Completo = Caminho & "" & Nome_Arquivo ...
I'm trying to make the criteria in an autofilter bit of code be the value of a cell in my spreadhseet. I have named the cell and would like to reference the named range rather than the cell address if possible.
Exp = Range("ExpenseGroup")
Sheets("Sheet2").Select
Selection.AutoFilter Field:=2, Criteria1:=Exp
Sheets("KPICharts").Select
Range("A1").Select
ExpenseGroup is my range which is located on sheet "cntrl" cell "G5"
When I run my code it referes to line 1 and says" Function call on lefthand side of assignment must return a Varient or Object".
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI would like to know that is there any way of recording criteria when I filtered data.
For example; A1,A2,A3,A4,A5,A6,A7,A8,A9,A10 and A11
I have this data such as Data,1,2,3,4,5,6,7,8,9,10 (starting from Range A2). Now when I created auto filter as
VB:
ActiveSheet.Range("$A$2:$A$11" _
).AutoFilter Field:=1, Criteria1:=Array("2", "3", "4", "5"), Operator:=xlFilterValues
And this criteria can be changed by the user anytime. Now for some reason sometimes I trigger a code which works under Function key(F8) and it refresh some data from the database. Just before it gets the data, it will remove the filter such as :
VB:
ActiveSheet.Range("$A$1:$A$11" _
).AutoFilter Field:=1
My problem is after I run my code (under F8), I want to filter back with the same criteria. Is there anyway that i record my criteria in any cell whenever I filter?
I am writing a code that will filter based on a named range. My named range is "Region," and it is currently in column B, but may be in Column C, D, E, etc., based on additional columns that the user of this sheet may add in the future.
I first had code like this (before using a named range):
HTML Code:
Sub CopyRegions()
Dim LastRow As Long
With ActiveSheet
LastRow = ActiveSheet.Cells(.Rows.Count, "A").End(xlUp).Row
End With
Application.ScreenUpdating = False
Range("B8").Select
ActiveSheet.Range("$8:$" & LastRow).AutoFilter Field:=2, Criteria1:="Europe"
But then I named column B to "Region," and so I want to do the same thing as above, but I don't know what to put where it has the number "2" - "AutoFilter Field:=2" because it may or may not be the second column in the future.
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
I am experiencing a problem with the autofilter function, but ONLY in Excel 2007. The "visual" filter works fine, but using the filtered range is a no go i.e selecting, copying and deleting an autofiltered range. The trouble is that the autofiltered range also includes all the (in this case) rows in between the target rows, which then means that the filter is more or less useless as a range selection tool.
Example code which was originally developed by Dave H.:
'Filter rows with autofilter
With ActiveSheet
.AutoFilterMode = False
With .Range("B5:N5")
.AutoFilter
.AutoFilter Field:=13, Criteria1:="Criteria"
End With
.AutoFilter.Range.Select
There are multiple duplicates of different part numbers in a column. When I autofilter the column, it shows 1 selection for each part number. I am trying to extract this selection fromm the autofilter dropdown box. I want to use it elsewhere in a dropdown box.
View 8 Replies View RelatedI have a simple three column range. I Autofilter the range based on one of the values in Column 1. I then want to grab the results into a range object.
I've been trying to use the Specialcells(xlcelltypevisible) route to no avail. It only gets one row when I should have many.
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
I am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
Code:
rfiltered.Cells(1, 3).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Receivables"
Selection.Copy
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.Paste
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
Code is attempting to autofilter any rows where text does not contain "0200" as indicated below, and delete all those rows. When reaching the line of code below the macro bombs and I get a "AutoFilter method of Range class failed" error message. Why that line is not being recognized.
Const strTOFIND As String = "0200"
Dim lngLastRow As Long
Dim rngToCheck As Range
'Application.ScreenUpdating = False
With Sheets("Platform")
[Code] ........
I have created a button to print an inventory list daily. The size of the list changes each day. The code I'm using works except I only want the Current Region to be defined as only the first 4 columns.
Private Sub CommandButton5_Click()
Sheets("Inventory").Select
Selection.AutoFilter Field:=4, Criteria1:="Inventory"
Set rng = Selection.CurrentRegion
ActiveSheet.PageSetup.PrintArea = rng.Address
ActiveSheet.PrintOut
End Sub
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
I want to perform some operations (basically a secondary filter) based on the values which are currently filtered within a single filter column.
.Autofilter.Filters(n).Criteria1
and
.Criteria2
are great, but what if there are more than 2???
i.e. I have a column containing values L01 to L20.
My column is filtered on L05, L06 and L07 (or some other combination).
I want to extract the values and L05, L06 and L07 and do what I will with them.
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I need an autofilter which filters rows based on a list of values (+50).
The problem is that I am looking for rows INCLUDING values from the list, not for exact match.
I am not able to make excel filter values including the values from the list... I am able just to filter values matching exactly values from the list.
[Code] .....