Return Multiple Results In Multiple Cells Based On Criteria In Yet Another Cell?
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
On sheet "master" I have a list of goals in column A.
Each has been assigned to at least one person. Each person will have their own sheet that will capture the goals assigned to them. As an example, see Al's sheet.
I am trying to get Excel to look for all of the goals assigned to AL on the Master sheet and list them nicely onto AL's sheet without out blank rows. (and for each, respectively on their own sheet). I could do this with Pivot Tables if the data were displayed differently, but I have been told that I have to display the goal assignments as shown.
I could use "x"s instead of their names to mark the assignment and I could combine the "goal-achieved expectations" and "goal #s" columns if it helps. I am not supposed to use filters either.
Note: Of course, a goal or an assignment could change on the master sheet, but the assignment is more likely to change.
how this done for AL, I can go ahead and create the other sheets.
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?
In plain English, I'm looking for something like
If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4 89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria: First Letter of the Unique ID in column "E" - O, M, or L Program Type in Column "F" - U or R 1. O-U = U 2. O-R = RU 3. M-U = U2 4. M-R = R2U 5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB: Option Explicit Sub test() Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long Set dic = CreateObject("Scripting.Dictionary")
I have a spreadsheet with several hundred line items that I basically want a summary of.
STRINGS CRITERIA OTHER string1 criteria1 other2 <---disregard because of other2 string1 criteria2 other1 string1 criteria2 other1 <---disregard because it is a duplicate string2 criteria3 other1 string2 criteria3 other1 <---disregard because it is a duplicate string2 criteria2 other2 <---disregard because of other2 string3 criteria1 other1 string3 criteria1 other1 <---disregard because it is a duplicate
I need the formula to return the value in STRINGS & CRITERIA, but I do not want it listing duplicates.
-I need the summary list on a separate sheet -STRINGS, CRITERIA, and OTHER are all strings -STRINGS are in alphabetic order -CRITERIA are listed in groups with regard to their STRING, but not necessarily alpha-order -OTHER are not in any particular order, but there are only two choices for OTHER -OTHER: if OTHER=other2, it should not be listed in the results
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113 ArkansasLife Health11114ArkansasLife Health
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40 2222 13:00 Store 2 1111 15:05 3333 16:50
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
I need to look up a value from a worksheet using multiple criteria, and return MULTIPLE results.
I have a table with comments written by different people about specific items. I would like to be able to type in that item name and return all those comments. BUT - it's not JUST the item name, but also on a specific date or some other criterion.
Currently I have managed to do this successfully with a single criterion, as in this array formula:
I then copy that formula to a few more rows and I indeed get a list of different names (F1:F1001) which match my criterion "ABC". But - I have at least one more, or even two more criteria. I've tried a whole lot of different things and I just get errors.
Has anyone tried something like this? If you have - how should I modify the above formula to allow for additional criteria? For example, not only A1:A1001 equal to "ABC," but also B1:B1001 equal to "XYZ", and so on.
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
how best to do this (bare with me I'm not quite a pro at excel yet!). I'll attach my doc (JMP Excel Forum) so you know what I'm taking about. I've set up the data to work in a similar way to this, as you can see I've a table set up (Appliance Sheet) which feeds information to the Main Sheet which contains the drop down lists.
What I need it to do is autofill the wattage column (Main!F8 onwards) with the wattage for the device as described in Appliance!N3 or N4 for example. For the wattage column to equal 28 (equivalent to Appliance!N3) then the following would show in the dropdown selections Type>Computers SubCategory>Monitors Device>BENQ G2222HDL Status>On
Is there a way to do this with the set up I have?
I did have a previous version of the whole worksheet that each Device had its own table and I looked up the wattage using and If formula to lookup a info on the device and knowing where to look it up based on the subcategory
And I got it to work but it was getting to cumbersome to add in new devices and update the formulas. If attached that doc (OLD) so you know what I'm talking about. The last two sheets are the same sheets that make up the new document (JMP Excel Forum)OLD.xlsm
I really prefer the new way I've got it set up. Its easier to add new information or options to the dropdown list
I need to have multiple ranges count based on several criteria. The hitch is that needs to count if one or more criteria is met not all. I tried using a COUNTIFS however that seems to evaluate based on AND not OR.
Is there a nested COUNTIFS or similar function that would work?
I'm using this formula in a roster scene to pick up people that call in sick and display their restored job in a different cell. The problem that I am having say for example employee one calls in sick at 2 pm and i assign that job in a corresponding cell to another, then employee 2 calls in sick for the 1pm shift (the call was made after i have already restored employee one a replacement), the formula automatically places the 1 pm in the cell above the 2pm.
Is there a way to stop it from changing the value once a value is entered in a corresponding cell?
Link to the original formula thread. [URL] ........
I have a large worksheet that lists employees and the hours they work each day in a pay period.
For Example:
Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.
Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."
I'll check this frequently if clarification is needed.
I am trying to create a workbook where I can log what work I have done in one spreadsheet and allocate an invoice number to it. In a separate spreadsheet within the same workbook I have created an invoice template. When I enter in the invoice number into the invoice template it's not collecting the correct information.
For example, if I want the details for invoice 10 to show in the invoice template, details for invoice 19 appear.
I have used this formula: =IFERROR(INDEX(ServiceRecord[[Invoice number]:[Date invoice issued]], SMALL(IF(ServiceRecord[[Invoice number]:[Date invoice issued]] ='Invoice TEMPLATE'!$F$8,ROW(ServiceRecord[Invoice number])),ROW(1:1)),2),"")
I am wanting to add new information as time goes on and also to be able to put in any invoice number into the invoice template to recall information as needed.
I've spent the last week trying to do the following, with little to no success....and I'm running out of hair to pull out!!
I have a worksheet (let's call it DATA) with the following column headers: * Site Name * Year Initiated * Status
plus a whole bunch of other columns of information.
On a separate worksheet (let's call it RESULTS) I'm trying to create a summary of all the Site Names where the Year Initiated = "2004" and the Status = "Active". There will be multiple occurences where this is true.
I then want to create further results where the year = 2005, 2006, etc., etc. I've been trying to use the INDEX function with variations of MATCH, SMALL, ROW, etc., etc., but so far, no luck.
Advanced Filtering is not an option as I need to do further manipulating of the results on the RESULTS worksheet.
I would like to create a formula in a summary sheet ("sheet 2 section" in attached)that looks up and sum cells based on multiple criteria in row and columns in "sheet 1 section". I thought I sumifs would work, but I kept getting #value errors. I'm not a power user in excel. I attached the spreadsheet - it is only an example of what I want to do as the real data is confidential and large. The result I should I get is in section 2. Lookup account 12.251 for tim in the month of February - result is 14.
Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".
So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.
I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
So i have a spreadsheet that has a list of members and how many events they have attended. That is fine because i achieved this by doing a countif function on their account number. The spreadsheet has to sheets Events Attended TOTAl and List. In the list it has their name account number and what event they attended and what date. What i need is to have a function that will lookup their account number and return what event they attended but they might have been to 4 different events.
I have a total of 5 columns dedicated to Event attended so we can tell it to lookup first event and return result then have an if function in the next column to lookup event and if its returned in previous column move onto the next event attended.
