I was provided previously with the code for a VLOOKUPS function for a project of mine by JBeaucaire. It can be found here, in the returned file he provided to me: VLOOKUPS multiple results in a drop down list.
The set up works wonderfully. But now I'm trying to accomplish something that is just a little bit different. I'm trying to to populate an array with all the results returned from an HLOOKUP formula. I was wondering if anybody had any code written that might create an HLOOKUPS function. I've tried to tweak the code provided for the VLOOKUPS function by JBeaucaire but I'm a novice, novice programmer and can only pull off simple functions and procedures.
I have some values representing daily values belonging to a particular Week number. The week numbers appear from 1 to 6 times in the top row. I would like to get data pertaining to a particular week number (as entered in B10) from the array in the area shown in Light Yellow and from there, I would do some minor calculations to arrive at the required data..
In the sample, the week number 3 appears 3 times and is shown here. The first value I am able to get using HLOOKUP. Getting subsequent occurrences are the issue I have. I thought I will try and use OFFSET function based on the cell reference of the first occurrence of the week number to obtain the rest. I have not had any luck in that.
Basically, my issue is how to use HLOOKUP to obtain if the Lookup value is repeated in the range. Or should this be tackled using some other route?
The week numbers appear in a sequence and are not placed at random.
This is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
I used a Fuzzy lookup to match the data that was shared between my two tables. I was able to run 3 different Fuzzy attempts to increase my accuracy because the source data had a lot of spelling errors and such.
Now I am at a point where I need to analyze the 3 possible Fuzzy matches. I am kinda stumped on the best route to do this and thought that an approximate match Hlookup would be the best route but I can't seem to get it to work.
Here is a pic of my table:[URL]
I am trying to match the cell outlined in red against the 3 cells outlined in green, when the best suited match is found I need to copy the green cell and the orange adjacent cells to it's left and right (ID# and Similarity). It would be best if the match threshold was in the low 90% range.
I have an excel model that cycles through several times and each time, changes the values in certain cells. What I want to do is to continuously add the values of each cell in my range and then paste the results on another worksheet.
My range of cells is B23:E93.
Say I want to run my model 3 times. I want to do the following calculation for each cell in my range and then paste the results:
First B23 = B23 (first value output) Second B23 = New B23 + First B23 Third B23 = New B23 + Second B23
I then want to copy the results from the final run onto another worksheet named "All Resources." The range here would be B2:E72.
What I need is a script or formula with returns multiple results and puts them into one cell.
The Excel is used as a Project Managment Work Sheet for Resources, working on different Projects and their dedicated hours
The raw data table looks like this: Column A: Project Name (=AllProjectsLists) Column E: Resource Name (=MasterDataResources) Column P: values from 0 to 8 (hours)
First I need to check per row the Resource Name. If the Resource Name is a match, than I need to check if in column P the value is bigger than 0. The result goes into a different sheet per row, one result per Resource, but the multiple results should be shown in one cell.
So the result should be something like:
Resource name "Thomas" .... Projects working on: "Project 1, Project 5, Project 13, ..." (in one cell) Resource name "Mary" .... Projects working on: "Project 3, Project 9, Project 13, ..." (in one cell)
I tried with this one, but it only returns one vale per cell:
I have used INDEX/MATCH/ROW/SEARCH functions, in different permutations, but I am unable to get the result. The data set is something similar to the below:
Car Region Own Use Color
Honda North Yes I use it to go for work Green
[Code] .....
I want to be able to do following (2 separate tasks):
Task 1 (if in A1 on a new sheet, I had Use, i want to list all the items in an adjacent column, skipping the blank rows)):
Use
I use it to go for work
Family trips Weekend fun 2nd car Work
Task 2 (if i had Honda (A2) and North (B2), I want to have the colors listed in Column 3):
Car Region Color
Honda North Green
White
I know this can be done by an auto-filtering or manual sort, but I have work with thousands of similar data on a regular basis, and i want to find a formula that will allow me to list the items based on different criterion.
i'm trying to use HLookup to find an adjusted midterm grade that's given. but i have some conditions:
If student missed exam and has a zero – keep zero. If student has a grade of 1-119 points, increase their grade 40 points. If student has a grade of 120-125 points, increase their grade 35 points. If student has a grade of 126-131 points, increase their grade 31 points. If student has a grade of 132-139 points, increase their grade 27 points.
with these conditions, if my midterms grade is 120, how would i calculate it using HLookup? i worked on it but i keep getting the #NA! error. =H4+HLOOKUP(H4,B24:D25,2).
hlookups. I have written a formula "T(HLOOKUP($H$2,Jan-Apr!$F$5:$EO$10,3,0))" where H2 is the date that I want to match on the other sheets. It works for the sheet Jan-Apr but I have 2 other sheets May-Aug & Sept-Dec. Unfortunately Im at a loss when it comes to writing the formula to include the 2 other sheets?
Jun Gross Profit  YZAAABACADAEAF45MonTuesWedThursFriSatSunTotal 46      1 47      6,166    6,166 48        492345678 505,2187,1159,4868,06413,75512,8076,166   62,611 51        529101112131415 535,2187,1159,4868,06413,75512,8076,166   62,611 54        5516171819202122 565,2187,1159,4868,06413,75512,8076,166   62,611 57        5823242526272829 595,2187,1159,4868,06413,7559,9617,589   61,188 60        6130       626,641         6,641
What I would like is to be able to type in a number (1-30) and have it give me the number underneath that number. So if I typed in the number 18, it would give me 9,486.
I have tried index(match), dynamic ranges, but I must be doing something wrong.
I know organizing the data differently would be easier, but I have external software that spits out the reports like this so continuously reorganizing the data would end up taking a lot more time.
if B2 value (red column) of datahave tab is equal to B2 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to A. if B2 value (red column) of datahave tab is equal to B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to B. if B2 value (red column) of datahave tab is not equal either B2 and B3 value of red column in lookup tab then B2 value (red column) of datahave tab is equal to H.
[code]....
i tried normal Hlookup but i do not know how combine multiple IFs to solve my problem.
I am looking to pull out an outcome based on the user inputting two criteria, below is an example:
A B C D E F G H I J
[code].....
So if the user inputted P1 into cell H2 and inputted 9 in I2, J2 would show Pass, but if they inputted P5 into cell H2 and inputted 9 in I2, J2 would show Fail.
I have 4000 rows of data with numbers in it (only one column...column C). These numbers are consecutive but these have breaks in between. So I am trying to find out where those breaks are and output those points in a list. So here is a macro that I came up with...but these array doesn't seem to write out results.... can anybody help please?
This macro tries to compare the two adjacent cells and if the difference between the values is greater than 1 then it copies that value in an array and writes that value in a cell in the same sheet.
Sub Macro1() Dim temp(1, 1000) As Integer i = 0 previouscell = 0 For Each cell In Range("C:C") currentcell = cell.Value abc = previouscell + 1 If currentcell <> abc Then temp(1, i) = currentcell i = i + 1 Range("D" & i).Value = temp(1, i) End If previouscell = cell.Value
I would like to use array v to store all the results of the for loop u...How can Ido it?
Dim myRange As Range Dim AnsRange1 As Integer Dim AnsRange As Range Set myRange = Application.InputBox(Prompt:="Select row to insert 10 rows below", Type:=8) AnsRange1 = myRange.Row Dim u As Integer Dim v As Integer Dim var() As Single v = 0 For u = 23 To 24022 Step 9 var(v) = u Next u If Not (AnsRange1 = v) Then MsgBox AnsRange1 Else Range(AnsRange1 & ":" & AnsRange1 + 9).Insert Shift:=xlDown End If End If
I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...
Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".
The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:
TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".
I'm trying to extend it to something like:
TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).
Here's an excerpt of the formula that works well for other queries on my worksheet:
I have a long list (>1000) of increasing temperatures in column A. I use an array formula, {=MAX(A3:A1029-A2:A1028)} to find the largest change between two successive values. What I need to do then is obtain the two values that give rise to that difference (for instance, they might be in A678 and A679). I can't figure out a formula for this.
I can manage it if I insert a "difference" column in B, and use:
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Code: Sub populate() Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I have a VBA subroutine that builds a list of dates in an array and then copies this to the worksheet using worksheetfunction.transpose. The array is two dimensional and therefore uses the variant data type.
This works fine in Excel 2002. In Excel 2003 the array is fine until the Transpose function is used, at this point they are changed from dd/mm/yyyy to mm/dd/yyyy. This means that some dates are changed (eg: 01/Mar/2008 becomes 03/Jan/2008) and some are written as strings (eg: 17/Mar/2008 becomes the string "17/03/2008" and cannot be operated on as a date).
I'm aware that there was a hotfix to deal with a similar issue regarding recalculation but this is on Excel 2003 SP3 which should already have that hotfix in place.
I have reduced my code down to a basic demonstration showing the problem. This assumes the worksheet contains some dates in "A2:A32". I have also attached the workbook containing this code.
VB: Private Sub CommandButton1_Click() Dim a() As Variant, c As Integer Redim a(1 To 31) For c = 1 To 31 a(c) = Cells(1 + c, 1) Next c Range("D2:D32") = WorksheetFunction.Transpose(a) End Sub
I have fixed this problem by looping through each element of the array and writing them individually in to cells but this is far slower so I'd like to know if there is a better solution than that.
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g. AAA blue BBB orange AAA round CCC smelly AAA elongated
Worksheet 2 I want to show: A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g. AAA blue round elongated BBB orange CCC smelly
First, I know passwords are easy to break. The point is only to keep the average Excel user in a dept of 3 from accidentally damaging the data.
Normally I hardcode passwords to view xlveryhidden sheets.
But this workbook is for a dept head who has standard password(s) he uses to open or edit a file. I would like to capture these passwords and make it the same password(s) to view a hidden sheet.
This way if he ever changes the password to open/edit it will automatically change the password to view the hidden sheet(s).
When trading starts, the TIME value records the time of the last trade, thus the first time will represent the time of the first trade - I am trying to capture this time value. The problem is that if another trade occurs, the TIME value updates to the time of that last trade. The TIME value is fed by a DDE link from a data source.
Is there a way to capture the "first" change in the TIME value ?
