VBA Autofilter Not Filtering Desired Date
May 3, 2012
In AA1 i input the date based on the lookup.
I want to filter Column 7 (Col G) to what ever is in AA1.
Say i had the date 02/05/2012. My filtered range should only be dated 02/05/2012 but its not filtering to those dates
Code:
With Sheets("UNPRODUCTIVE")
With .Range("AA1")
.Formula = "=IFERROR(LOOKUP(2,1/(TEMPLATE!S12:S40""""),TEMPLATE!B12:B40),"""")"
.Value = .Value
.NumberFormat = "DD/MM/YYYY"
End With
On Error Resume Next
.Range("A1:T1").AutoFilter Field:=7, Criteria1:=.Range("AA1").Value 'filter with only the dates the macro is run for
On Error GoTo 0
End With
View 4 Replies
ADVERTISEMENT
Aug 1, 2007
when i used autofilter example there is 3 criteria on it A, B, C and when i choose A one of the lowest column still showing B or C criteria.
View 2 Replies
View Related
May 27, 2009
I'm trying to concatenate quite a few cells together. One of the items being included in the concatenation is a date, however when I do this the output is the numerical version of the date that Excel uses to mathematically calculate with. My question is how do I do a cell concatenation with the desired output showing the date, not the numerical equivalent used by Excel? Book1.xls attached is what I'm talking about.
View 2 Replies
View Related
Apr 24, 2012
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
View 7 Replies
View Related
Aug 14, 2014
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
Example Workbook.xlsx
View 5 Replies
View Related
Mar 20, 2014
Trying to do a linkback from another post located here but not having much luck doing it: [URL]
I'm working with 2 date columns and trying to filter a view to only include projects with dates within 3 months of today's date.
I've attached a current working file of the data and the end result i'm hoping to achieve via a macro of some sort.
I've manually got it to work via formula by inserting 2 additional columns (highlighted yellow) which determine if the dates "YES" fall in this 3 month time frame of "" blank if not.
create a macro which does all of this automatically without modifying any columns if this is possible
View 5 Replies
View Related
Apr 23, 2012
I have a spreadsheet with 5000+ rows. On one column there is a user number, the user number repeats few times. Therefore, there is a different number of rows for each user.
Also, the first line for each user has a date on a different column.
I am interested in filtering out the users who do not match a certain date range. The issue is that the code I found hides all of the rows without dates and also the rows that are with the range of dates.
View 2 Replies
View Related
Jul 30, 2013
I have a table in excel which looks something like this:
Product Ref
Date
Description
1
29/05/2013 19:58:50
Product A
[Code] ....
All I'm trying to do is get the only the first dates for each of the related Productsrefs. So the result should look like this:
Product Ref
Date
Description
1
28/05/2013 19:26:48
Product A
[Code] ....
Is there a built in function in excel that can achieve this?
View 3 Replies
View Related
Jul 21, 2014
I have a userform which writes a date into a cell within a row within a table. The code is
[Code] .....
Everything works fine, the date gets sent to the cell as stated and is all correct. However, I also have vba which runs an advanced filter, which the following code is included in.
[Code] ....
P7 and O7 are the advanced filter criteria. Basically in the form I have a "completion date" which is posted with the first code I posted. So lets say that the date posted is 25/07/14, and I want to have a filter of all the dates which are coming up in the next 7 days to be shown in the Advanced Filter results area of my spreadsheet.
With the second part of code I posted, this results in nothing when using the advance filter. The original posted date in the cell (from the first code) is shown as "25/07/14". So when I run the advanced filter, nothing happens. HOWEVER, if I go to the cell containing "25/07/14", delete the contents and write "25/07/14" manually and then run the advanced filter (second code posted), the date shows up in the results working fine. But I dont understand how me typing it out again makes it work?
View 2 Replies
View Related
Jan 28, 2014
I want to be able to filter on an excel spreadsheet by dates between x and y. The values x and y are each in my userform textboxes, tbStart and tbEnd.
For whatever reason there seems to be a format issue. When I run the script I see that the data is filled correctly in the filtering fields but I don't see any results. I simply need to click ok when reviewing the filter and it works. This makes me think that there is something wrong with the format of my tbStart.Value and tbEnd.Value
Here are the variations I have tried:
The values on their own should always be formatted as date in the text box as I am using spin buttons to edit the date
with this code or similar
Me.tbEnd = Format(CDate(Me.tbEnd) + 1, "dd/mm/yyyy")
Me.tbEnd = Format(CDate(Me.tbEnd) - 1, "dd/mm/yyyy")
Version 1:
wsData.ListObjects("Table2").Range.AutoFilter Field:=2, Criteria1:= _
">=" & Me.tbStart.Value, Operator:=xlAnd, Criteria2:="=" &
CDate(Me.tbStart.Value), Operator:=xlAnd, Criteria2:="=" &
CDate(Format(Me.tbStart.Value, "dd/mm/yyyy")), Operator:=xlAnd, Criteria2:="
View 2 Replies
View Related
Oct 13, 2006
I have a spreadsheet showing a number of jobs with numerous columns for individual bits of data regarding the jobs. Two of these columns show a strat date and an end date for the jobs. What I require is a seperate worksheet that will show the rows that have the formula =Today() be equal to or in between the start and end dates. I've been trying for ages now and have a mental block.
View 2 Replies
View Related
Nov 21, 2006
I have a column formatted as a date. I would like to filter out all rows which have a blank date value. I don't see any blank value to select when I try to select auto-filter for that row. Any suggestions?
I would like to filter out the blank values because I found that if I pivot on the data and there are blank values in the field, I can not use the group option for that field.
View 9 Replies
View Related
Mar 15, 2013
I have a set of data points with date and time shown in the picture. I need to take out all the data point that are at the 30 min interval. Meaning I only want to have the data points hourly only. What can I do to remove the :30 minute datas.
I have tried the find option typing In :30 and getting all the points but then have to replace, which I do not want to do. Need to remove them so they do not show up on the trends ( graphs) I made for them.
This is for excel 2007.
Seems I can't get picture up on the ipad, so the data points look like this
1/1/2012 0:00
1/1/2012 0:30
1/1/2012 1:00
1/1/2012 1:30
And so on for an entire year. Just need to remove the ones with the :30
View 12 Replies
View Related
Dec 15, 2006
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
View 10 Replies
View Related
Dec 22, 2009
I am having trouble getting an autofilter to work in VBA which comes up as a 'syntax error' on this line.
Range("VehicleList").Offset(-1).AutoFilter 19,
View 9 Replies
View Related
May 14, 2013
I am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
View 5 Replies
View Related
Aug 3, 2007
I need to have users input a date range for a report and then use that to autofilter a query from a database.
I think I have it close, but I can't tell what I'm missing. I can see the InputBox dates if I put them into a cell. And the criteria operators come up correct in the Autofilter, but the value shows as Starting and Ending, so it's filtering out everything.
View 10 Replies
View Related
Aug 17, 2006
I have this script it does exactly as i want it to do, filter a table of date using two selected date in D3 and D4. There is only one problem: when i choose the dates and run the script it changes them around it around.
e.g
cell D3 = 01/11/2006
cell D4 = 01/12/2006
so it should just show all of november (11)
but D3 will filter using 11/01/2006
and D4 will use 12/01/2006
Sub DateFilter()
Range("a8:r323").AutoFilter Field:=1, Criteria1:=">=" & Range("D3").Value, Operator:=xlAnd, _
Criteria2:="<=" & Range("D4").Value
End Sub
View 7 Replies
View Related
Mar 31, 2007
I have a list of data that I'm sorting by date using an autofilter, but the way I have to set my criteria is by fiscal years and quarters; so I'm only concerned with the year and month parts of a date like 11/20/2006.
For example: all the dates in the list are in the standard US mm/dd/yyyy format, and for one filter I want to display only records with a date in the year 2005. I could use fixed dates starting with the first of the year and the last of the year, but I'm wondering if there is a better way.
I tried variations like this (but nothing worked).
varYear = 2005
Range("A1:K48").AutoFilter Field:=3, Operator:=xlFilterValues, Criteria1:="<=*" & varYear
View 3 Replies
View Related
Mar 14, 2014
I have a sheet called "interface" which people can input the date in cell A2.
The autofilter in sheet"originaldata" will filter the data according to the date in cell A2 in sheet "interface"
However, when i input the date 01 Aug 2009, the filter will give me 08 Jan 2009
VB:
Sub Date_filter()
Dim Inputdate As Date
Sheets("interface").Activate
Inputdate = Format(Sheets("interface").Range("A2").Value, "dd mmm yyyy")
[Code] ....
View 1 Replies
View Related
Nov 28, 2011
Having a strange issue running an autofilter on a set of data - trying to isolate a particular date...
I have four variables :
wsDataSheet (Worksheet) specifies the sheet containing the datargAllRange (Range) specifies the range of data to be filteredinValueDateColumn (Integer) specifies the column in which the dates are held (entire column is Date formatted)dtDate (Date) is a date value specified by the user on the main sheetFor test purposes, I've filled the column with the same date (19/07/2011) and specified the same date on the main sheet (19/07/2011) - and checked that all variables are holding their expected values in the debugger.
But for some reason, when I run the code...
Code:
With wsDataSheet
.AutoFilterMode = False
.Range(rgAllRange.Address).AutoFilter Field:=inValueDateColumn, Criteria1:=dtDate
End With
The autofilter finds no matches??
Very puzzled as I've gone to great lengths to ensure the date formats are consistent.
View 3 Replies
View Related
Sep 3, 2007
I would like to include a filter in my macro that shows orders with current date, and sometimes current date minus one (yesterday). This is a monthly recurring task.
In the custom filter I tried: "equal to @Today" but that didn't work. Can someone tell me how I can solve the problem? Here's a snippet from my macro, filterne on something else Selection.AutoFilter Field:=21, Criteria1:=">=89" 'STCD_TO_TODAY
View 3 Replies
View Related
Dec 23, 2008
I have tried to record a macro and change it to what I need but so far I have not been able to make it work.
I would like to have a macro that will auto filter on colomn 1 in the following way.........BETWEEN >= Today -10days and Today.
View 2 Replies
View Related
Jan 10, 2012
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
View 1 Replies
View Related
Nov 4, 2013
I got a problem using AutoFilter with VBA in Excel.
It works well for regular filters, but filtering the date column does not work as intended. The column is formatted as date, I can filter it manually and absurdly, if I run my code, it filters nothing but when I check the filter and then only click ok (no change being applied to the filter criteria), it starts filtering correctly.
Here is my code:
Code:
ws.ListObjects(SheetName).Range.AutoFilter Field:=3, Criteria1 _
:=">" & CDate([datecell]), Operator:=xlAnd, Criteria2:= _
"
View 1 Replies
View Related
Aug 11, 2009
I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
View 2 Replies
View Related
Mar 19, 2012
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
View 1 Replies
View Related
Mar 13, 2013
I have a strange problem I cannot solve in that I'm trying to create an auto filter that returns records based on a date variable.
If I set the code to equal the date variable, it returns information. If I set the code to return records AFTER the date, it returns nothing.
Code to return records on the date:
Dim startdate As Date
startdate = Format((Now), "dd/mm/yyyy")
ActiveSheet.Range("A:B").AutoFilter Field:=2, Criteria1:="=" & startdate
This returns data, however if I slightly amend it to get records on or after the date:
Code:
Dim startdate As Date
startdate = Format((Now), "dd/mm/yyyy")
ActiveSheet.Range("A:B").AutoFilter Field:=2, Criteria1:=">=" & startdate
It returns nothing. Is there a syntax problem in my code.
View 1 Replies
View Related
Feb 11, 2008
i wanted to create a macro that will autofilter my starting dates in I to the newest date entered. So ive recorded the macro: ....
View 9 Replies
View Related
Sep 25, 2009
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies
View Related
