I have this script it does exactly as i want it to do, filter a table of date using two selected date in D3 and D4. There is only one problem: when i choose the dates and run the script it changes them around it around.
e.g
cell D3 = 01/11/2006
cell D4 = 01/12/2006
so it should just show all of november (11)
but D3 will filter using 11/01/2006
and D4 will use 12/01/2006
= LOOKUP(BH23,B1:AF1) this is looking for a date (a returned value from another set of equations) in a row of other dates. I want a macro to use this lookup, find the date and then select it as an auto filter, with criteria? here is the macro and the part where it says auto filter is the part where I want it to do the above lookup function
Sub Brooke() ActiveWindow.ScrollWorkbookTabs Sheets:=-4 Sheets("Feb 03").Select Selection.AutoFilter Field:=28, Criteria1:="BH" Range("AD7:AD56").Select Selection.Copy Sheets("Brooke Hotel Running Order").Select ActiveSheet.Paste ActiveWindow.ScrollWorkbookTabs Position:=xlFirst Sheets("Feb 03").Select Range("AD62:AD68").Select Application.CutCopyMode = False Selection.Copy Sheets("Brooke Hotel Running Order").Select Range("B32").Select ActiveSheet.Paste ActiveWindow.ScrollWorkbookTabs Sheets:=-1 ActiveWindow.ScrollWorkbookTabs Sheets:=-1 Range("F23").Select End Sub
The 'Details' sheet has, among other data, the 'year' that the workbook refers to. From this, the beginning and end dates of each quarter appear in Cells F2:F10 in the 'Details' Sheet in the format dd/mm/yyyy.
In the 'Management' Sheet I have four buttons - Q1, Q2, Q3 and Q4. I want to attach code to apply a custom autofilter to each button so that clicking on one of the buttons will show only data from that quarter.
Using the macro recorder the following code is generated when applying a custom AutoFilter for Quarter One:
I recorded a macro to custom AutoFilter 2 columns in a worksheet. The information will be filtered between 2 dates; i.e. >= cell B2 and <= cell C2.
Both cells are formated to dd/mm/yy so i entered 1/12/06 (for 1st Dec) in cell B2 and 31/12/06 (for 31st Dec) in cell C2.
When i enter these 2 dates, click the button to run the macro and check the custom filter in the "Planning" worksheet it appears that the dates change to 12/01/06 and 21/12/06 and no records appear - although i know at least 65 rows should show.
If i then enter the dates in B2 and C2 as mm/dd/yy instead (but leave the date format of the cell as dd/mm/yy) the filter works perfectly; i.e. enter 12/01/06 and 12/31/06. However I plan to issue this spreadsheet out to other staff and as every other date in the spreadsheet is in the uk format dd/mm/yy i dont want to confuse them by insisting they use the mm/dd/yy format for this one function.
Has anyone ever encountered this before? and if so is there some way i can fix it?
Heres the code for the filter:
Sub Monthly_Stats()
Sheets("Planning").Select Selection.AutoFilter Field:=5, Criteria1:=">=" & Sheets("Filtered Statistics").Range("B2").Value, Operator:=xlAnd _ , Criteria2:="<=" & Sheets("Filtered Statistics").Range("C2").Value, Operator:=xlAnd Selection.AutoFilter Field:=82, Criteria1:="<>" End Sub
I am encounting problems with an AutoFilter which is run in a macro after the user has selected dates from 2 Date Pickers (DTPicker) on a user form. The filter is applied to 1 column in a spreadsheet containing dates in the formay "dd/mm/yy" and is supposed to filter dates =2 and between a range of dates as selected. The resultant filter is blank, if the macro is debugged at this point the date format for the 1st criteria is found to have swopped the "dd" & "mm" around but the 2nd criteria is fine. eg. user selected 01/07/07 and 31/07/07 the resultant filter applied is 07/01/07 and 31/07/07. I have re-formatted dates to Long as per the article on this site @ http://www.ozgrid.com/VBA/autofilter-vba-dates.htm but still get the same result ???
Dim fDate, tDate As Date Dim lfDate, ltDate As Long fDate = frmReportMenu.dtpFromDate.Value tDate = frmReportMenu.dtpToDate.Value fDate = DateSerial(Year(fDate), Month(fDate), Day(fDate)) tDate = DateSerial(Year(tDate), Month(tDate), Day(tDate)) lfDate = fDate ltDate = tDate
The problem is that when I add dates via macros (like from a userform to a selected cell) to a cell in autofiltered column, the autofilter doesn't recognize these values as "proper" dates. If I activate the formula bar and press Enter, then the autofilter identifies the date properly.
This is how the autofilter popup looks like after I have added a date via my macro: [URL] ....
The new date doesn't get categorized by year and month, instead it just shows as text on a separate line (circled in red) (huhtikuu = April)
I have earlier used Formula:
[Code] ....
How I could get the autofilter working right with the inputed values? I have tried adding the date via .Value and .Formula but neither one works.
I have a column of dates: 1 day per row: 01/01/10, 02/01/10, 03/01/10, etc in sequence, without gaps (European date format). The list can begin with a different start date depending on initial user input and is not always a Monday. I want the user to be able to autofilter so that it only shows dates that fall on a Monday.
Private Sub Worksheet_Activate() Dim dDate As Date Dim strDate As String 'disable autofilter if already enabled With ActiveSheet .AutoFilterMode = False End With 'autofilter column a only, from a12, to filter Mondays If IsDate( Range("a12")) Then dDate = Range("a12") strDate = Weekday(dDate) Range("a12").AutoFilter Range("a12").AutoFilter field:=1, Criteria1:=strDate End If End Sub
Through VBA I am trying to filter for today's date and all dates 30 days in the future as well as all dates 30 days in the past.
I am currently using the code below, but it only show dates 30 days in the future. I cannot get it to populate cells that are either 30 days in the future or 30 days in the past.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
I need to have users input a date range for a report and then use that to autofilter a query from a database.
I think I have it close, but I can't tell what I'm missing. I can see the InputBox dates if I put them into a cell. And the criteria operators come up correct in the Autofilter, but the value shows as Starting and Ending, so it's filtering out everything.
I have a list of data that I'm sorting by date using an autofilter, but the way I have to set my criteria is by fiscal years and quarters; so I'm only concerned with the year and month parts of a date like 11/20/2006.
For example: all the dates in the list are in the standard US mm/dd/yyyy format, and for one filter I want to display only records with a date in the year 2005. I could use fixed dates starting with the first of the year and the last of the year, but I'm wondering if there is a better way.
I tried variations like this (but nothing worked).
The attached workbook has dates in column C, although some of these dates are just strings.
I'm trying to write some vba that will tell me how many of the cells in column C contain a date (or looks like a date) that is greater than (after) the real date in cell G1.
At the moment I loop through the cells in column C and can ascertain, which dates can be counted, then copy one row over at a time, but I'm looking for a slicker (perhaps one-liner) answer, perhaps by copying a block of rows in one go. The aim is to copy those rows to another sheet. There are many more rows than in the attached, and many sheets to process, and I have no control over the format of the dates/strings in column C. Currently it takes about 20 seconds to copy over the necessary rows, but I'm looking for it to happen much more quickly; current thoughts are to sort on column C (sorting on column C anything that looks like a number as a number - which has it's own problems!), have a count of dates satisfying the criterion (say using a worksheet formula such as COUNTIF or SUMPRODUCT, perhaps also using EVALUATE) then copy a block of rows in one go.
not very relevant, but the existing code is something like this which highlights rather than copyies the rows(included in the attached): ...
Having a strange issue running an autofilter on a set of data - trying to isolate a particular date...
I have four variables :
wsDataSheet (Worksheet) specifies the sheet containing the datargAllRange (Range) specifies the range of data to be filteredinValueDateColumn (Integer) specifies the column in which the dates are held (entire column is Date formatted)dtDate (Date) is a date value specified by the user on the main sheetFor test purposes, I've filled the column with the same date (19/07/2011) and specified the same date on the main sheet (19/07/2011) - and checked that all variables are holding their expected values in the debugger.
But for some reason, when I run the code...
Code: With wsDataSheet .AutoFilterMode = False .Range(rgAllRange.Address).AutoFilter Field:=inValueDateColumn, Criteria1:=dtDate End With
The autofilter finds no matches??
Very puzzled as I've gone to great lengths to ensure the date formats are consistent.
I want to filter Column 7 (Col G) to what ever is in AA1.
Say i had the date 02/05/2012. My filtered range should only be dated 02/05/2012 but its not filtering to those dates
Code: With Sheets("UNPRODUCTIVE") With .Range("AA1") .Formula = "=IFERROR(LOOKUP(2,1/(TEMPLATE!S12:S40""""),TEMPLATE!B12:B40),"""")" .Value = .Value .NumberFormat = "DD/MM/YYYY" End With On Error Resume Next .Range("A1:T1").AutoFilter Field:=7, Criteria1:=.Range("AA1").Value 'filter with only the dates the macro is run for On Error GoTo 0 End With
I would like to include a filter in my macro that shows orders with current date, and sometimes current date minus one (yesterday). This is a monthly recurring task. In the custom filter I tried: "equal to @Today" but that didn't work. Can someone tell me how I can solve the problem? Here's a snippet from my macro, filterne on something else Selection.AutoFilter Field:=21, Criteria1:=">=89" 'STCD_TO_TODAY
creating 2 fields in my userform that the user can input 2 dates that would serve as the range to set the autofilter. So user inputs field1 = 11/01/2011 and then field2 = 01/31/2012.
I was previously using a month range in my userform, populating from the known months and allowing the user to select a range. Since our data is now spanning a new year, this is no longer possible as I cannot make the combobox range go from 11 - 1 (November to January)
VBA Userform - select months & Months between - Code Included
I got a problem using AutoFilter with VBA in Excel.
It works well for regular filters, but filtering the date column does not work as intended. The column is formatted as date, I can filter it manually and absurdly, if I run my code, it filters nothing but when I check the filter and then only click ok (no change being applied to the filter criteria), it starts filtering correctly.
I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
In column C27 and down, the user can input a date. In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.
In the expense log, Column C is a list of Dates and Column I is a list of expenses. I want to Sum the expenses in the 'Expense Log 09' to a new sheet based on a Date entered in H24 on the new sheet. I have tried the formula as shown below and Get the result #NAME?
=SUM(IF(Expense Log 'Expenses Log 09'!C8:C100,H24,'Expenses Log 09'!I8:I100)). I would Like to SUM all expenses After the posted date including that date.
