I use this code to delete some rows, how I would modify it to work in another spreadsheet where it would "Loop" through and delete rows that start with "User:Kellcyna" down to where the rolls start with "Numbers", and delete the rolls that start with "Total cost center" down to where the rolls start with "Numbers".
The data can contain up to 50000 rolls at times.
Sub Finally()
Application.ScreenUpdating = True
[a:a].AutoFilter Field:=1, Criteria1:="="
[a2:a65536].SpecialCells(xlVisible).EntireRow.Delete
If [a1] = "" Then [1:1].Delete
ActiveSheet.AutoFilterMode = False
[Code] ........
Here is a sample of the data I need the macro to work on. The rows I need deleted are the rows that are highlighted.
User: Kellcyna STANDARD HOURS BY COST CENTER Date: 09/29/2013 Time: 15:10:04 Page: 10
Comments:
Order Op Emp Post Work ctr Setup Unit Planned Earned Total Actual Actual Actual Total Total Orde C R
# Date SU Unit Plnd Stds Setup Run Tme Brd Tme Prod Run Time E
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I have output from mainframe that is copy/paste to an excel workbook. I need to have VBA loop and delete the 15 rows. This is mainframe output so it will always be 15 rows
1. Delete all data after row 51. 2. Find the average cost (column 4) and delete all rows where the cost is below average. Thus only retaining rows with an above average cost. 3. Then I want to conditionally format any number in column 6 which appears more than three times. 4. I want to loop this through all worksheets in my workbook.
I have two worksehets. The first worksheet contains data on products. The product code is in column A. My second sheet contains a list of product codes in column a. I want to delete all rows in worksheet 1 where the product code doesnt exist in the list in worksheet 2. Can someone provide a outline for a macro to loop over sheet one and look up the value in worksheet 2 and delete the row from worksheet 1?
I have anywhere from 3000 to 10000 rows to delete in a a number of worksheets, but would like to avoid using a loop as even with onscreen update turned to off like this:
I need to be able to run a macro that will find the word “report“ within a cell in column A. Once found it I then need it to delete that row, the row above and then the 9 rows underneath it. Once it has deleted that data I need it to then move to the next and so on.
It’s a report I have dropped into excel which repeats the page header. E.g the following is repeated constantly which I need to be deleted:
¬¬¬¬¬¬¬¬¬¬¬¬¬ Report: xxx Company: xxx Turnover By C 01/04/2008 To **THIS REPORT Customer: 0 T ¬¬¬¬¬¬¬¬¬¬¬¬¬ Account Cust Num ¬¬¬¬¬¬¬¬¬¬¬¬¬
What I want to do is delete a row if the middle column is less than 1.
However my loop seems to skip a row if the column data is like the below
a b c
1 1 1
1 0 1
1 0 1
1 1 1
1 0 1
End
Code: Range("A2").Select Do If ActiveCell.Offset(0, 1) < 1 Then Range(ActiveCell, ActiveCell.Offset(0, 2)).Select Selection.Delete Shift:=xlUp End If ActiveCell.Offset(1, 0).Select Loop Until ActiveCell.Value = "End"
I have some code that is working great except that it throws up an error on the last run through because it doesn't find any more rows to delete. I've tried "On Error GoTo" but it doesn't catch it. It seemed to work on my home computer which is running Excel 2010 but then on Excel 2007 I get the debug screen and I don't want that to show up for other users that I share the code with.
Sub DeleteHeaders() Dim lastrow As Integer lastrow = ActiveSheet.Cells(Rows.Count, "A").End(xlUp).row
In the code below I find rows containing "$$ #" at the far left and process it. For all the remaining rows I want to delete the entire row, my macro only deletes some rows. Obviously I am not grasping something about looping throught the rows to delete unwanted data.
I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".
At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):
I have a requirement where I have to add a row with x columns using vba. this is the code I am using now
k = 17 prodetails = .GetFieldValue("Product Details") sSeats = .GetFieldValue("Seats") If isRecord Then While isRecord Sheets("Products").Rows(k).Insert Shift:=xlDown Sheets("Products").Rows(k + 1).Insert Shift:=xlDown Sheets("Products").Rows(k + 2).Insert Shift:=xlDown ThisWorkbook.Sheets("Products"). Cells(k, Prod6Col) = prodetails ThisWorkbook.Sheets("Products").Cells(k, Unit4Col) = sSeats isRecord = .NextRecord() Wend End If
In this code I have declared Prod6Col and Unit4Col as constants. instead I need to use them as variables like in this modified code. However if i use this code, I get an object definition error.
k = 17 m = 20 (20th column) l = 18 (18th column) prodetails = .GetFieldValue("Product Details") sSeats = .GetFieldValue("Seats") If isRecord Then While isRecord
I have an excel file that i need to delete some empty rows in the file. it looks like this: I have to delete THE EMPTY ROW above each custom table, and leave everything else as it is.
empty row custom table data data data empty row custom table data data data data empty row custom table data data
I am looking for a vba code that will delete rows for me. have data in column E and I need the code to look for any cell that has the word "DELETE" in column E. When it finds the word "DELETE", I need it to delete the entire row. For instance if the first instance of this in cell E41120, then it should delete that entire row and look for the next instance to do the same.
I have seen codes out there to delete rows, but I can't get any of it to work for my situation.
My data comprises from B2:D2000 ( I am exporting data from SQL Server) so the data is in the horrible conditions , having blanks cells in these three columns . Columns E , F and G are empty.
Can someone help me in cleaning these empty rows in the three columns on the following conditions
delete entire row if column B, C and D contains empty or blank cells or zero delete entire row if any cells in Column C and D contains text values delete the entire row if Cells in colums A contains the word Map
the data in the column C is in the following format( Length x Width x Thickness) C2=78x36x4 C3=78.5x36.5x4.5 C4=7x4x3 C5=72x36x0.5 C6=72x36x19mm
Is it possible to get this data in the following form
I am using the following piece of code, which I have copied and modified from another workbook in which it worked properly.
Option Explicit Sub DeleteRows()
'Delete Unneeded Rows Dim lUsedRangeRows As Long Dim lRowCounter As Long
With ThisWorkbook.Sheets("Data") lUsedRangeRows = .UsedRange.Rows.Count
For lRowCounter = lUsedRangeRows To 3 Step -1 'work from the bottom up If DateValue(.Cells(lRowCounter, 5)) < DateValue(.Range("PayDate")) Then .Cells(lRowCounter, 5).EntireRow.Delete End If Next lRowCounter End With End Sub
I receive a "Type Mismatch Error" on the If DateValue line (highlighted red). PayDate is a named range for cell A2 on the same page.
I need a code that I can run that will delete all rows that have nothing in at the bottom of the sheet. What I mean is I will be printing a file and because rows have been deleted that had data in a lot of sheets are being printed and wasted. So what I need is a before close code or something that will actually make the last row with data in the last row!
I have a database and at times I have empty rows. I am trying to write code that looks at the database (it may change daily) and deletes the rows that are empty. The code I've written does NOT work:
Sub emptyrows() Dim emptyrows As Object Set emptyrows = Cells(65536, 255) If Rows = "" Then Selection.Delete Shift:=xlUp End If End Sub
I have a bit of code that deletes row by row and takes a long time to process. I've seen people suggest deleting by range processes more quickly. How can I modify this to delete by range?
lngLastRow = Sheets(2).Range("A65536").End(xlUp).row For lngRowCount = lngLastRow To 1 Step -1 If Application.WorksheetFunction. CountIf(Sheets(2).Range("A1:A" & lngRowCount), Sheets(2).Range("A" & lngRowCount)) > 1 Then Sheets(2).Range("A" & lngRowCount).EntireRow.Delete End If Next
I have trouble in deleting the duplicate rows. I have a code to find the duplicate values
Public Sub Unique_Proj() 'This is the first step which takes out the unique projects from the base data 'Call Work_Assignment 'this selects the unique projects in the sheet Application. ScreenUpdating = False Dim A, E, B(), n As Long Sheets("Projects").Select With ActiveSheet A = . Range("g2", .Range("g" & Rows.Count).End(xlUp)).Value Redim B(1 To UBound(A, 1), 1 To 1) With CreateObject("Scripting.Dictionary") .CompareMode = vbTextCompare For Each E In A If Not IsEmpty(E) And Not .exists(E) Then n = n + 1: B(n, 1) = E: .Add E, Nothing End If Next End With Sheets("Unique Projects").Select Range("G3:G" & Rows.Count).ClearContents Range("G3").Resize(n).Value = B
End With Application.ScreenUpdating = True End Sub
However, this gives me a list of values in that perticular column only.
What I want is either delete the complete row which is duplicate OR select the entire range of values which are unique (based on the column searched) and paste it in a new sheet. The second option is more better for me.
I'm trying to write a macro to update a report including deleting all rows that do not contain a specific value of TP in column K. Below is one of the examples.
This vba code will delete all the rows which have data in. At present it starts on A2 (so doesnt delete anything above A2. Which part of the code in red would I need to change for it to be A3 and which would I need to change for it to be B3.
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project. Row 2 is blank Row 3 is blank Row 4 is blank Row 5, A5, contains the word Organization. Row 6 is blank Row 7, A7, contains a 6-digit number starting with 3. Row 8 is blank
(all of the above starts over again (loops) approximately 30 times) The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet. I am aiming for: Project 301111
I've got a sheet that I build from a weekly sheet. I can have 30 to 60 rows, but I always have 10 to 20 rows left over with data in column C, none in A, my last code is "Range("A1").End(xlDown).Offset(1, 0).Select" which takes me to the last cell in column A. Any code that I can then delete say 20 rows after that? I tried one code, but it wanted to delete everything below the cell selected which ran & ran.
"-" are blanks. Range moves the selected cell to A4. I want to delete row selected + 19 more.
I have a worksheet populated with data. I have sorted the data and have dupulicate values in column B,C,D up to H. I have put in a formula to give me a 1 value in column A where there are duplicates. Is there a way to write a VBA code that will Delete all the rows that have a 1 in column A.
I have a sheet with several thousand rows. I want code that will do this:
- After finding a "D:" in column A (contained in the cell but will be at a different place each row), start a running total of values in column B. - When finding "F0" in column A... --if the running total of values for rows that have "D:" equals the value in column B with the "F0", delete the "D:" rows --if the running total doesn't match, reset the running total and search for the next "D:" - Repeat for all rows.
The spreadsheet I am working in has $ which I need to total. The information, or rows, can vary from day to day so there is no static place to have a cell with an @sum. Management wants me to add a pretty line that says
'Total' in one cell and the $ next to it. I have about 30 sheets with columns to total. Yuck, takes forever.
How do all of you total if you don't know the last row? At the top?
I thought it might work to put an @Sum in the last row of the spreadsheet, in the column
I need to total, and having a VB code to delete empty rows. That would be automatic.
