There is a lot of data that I need to transfer on to an archive sheet. I have recorded a macro that will allow me to copy and paste data onto the Archive sheet but I need to keep the information on the Archive sheet and have additional data paste on the next available row on the Archive sheet
Below is the VBA code of the recorded Macro, what do I need to add to have it paste on the next availble row on the Archive sheet.
I have two files and need to copy the information from columns B,C,F,H rows 5 true 29, and past it in the other file in Columns B,D,G,J; rows 3 true 35.
The code that I have works fine, but have one problem - it past the info in the rows starting from 37 instead from row 3. Here is where I need your help. The code is triggered when the condition Arr ( arrived) is chosen in the column AH ( file Delivery Status) and then the specific warehouse is chosen in the column AI. To make it easy I have left only one warehouse as a choice.
Attached you can find sample files ( I have delete the info from the heading cells as it was in another lenguage)
I am trying to write a macro that Copies the last row of data in one sheet and Pastes it into the first open row. I'm assuming I can't do it with the macro recorder because I wouldn't be specifying the last row and first row. Does anyone know what the code might be for these actions
I created this spreadsheet a few montsh ago to help with forecasting for my companies products. The tabs of interest are the HIST vs FORECAST, FORECAST TOOLKIT, and the FORECAST TABLE tab – now the FORECAST TABLE tab is always hidden and if you unhide it then it will rehide itself once one of the macro’s is run. I set it that way to prevent people accidently making adjustments to the forecast data.
The way the sheet is supposed to run is that when you are on the hist vs forecast page then you can click one of the grey buttons on the right which will then graph the numbers for the relevant product on the toolkit page – so far so good, this bit all works fine, there are separate macro’s for this each named after the product they control.
Then once you are on the toolkit you can play about with the numbers until you come up with a 6 month forecast you are happy with which will be on the 6 cell line in the bottom right were it says “ IMPORT”. You can then click on the “IMPORT” button which will then copy and paste it back into the forecast table under the relevant setting – the macro for this is called IMPORT2 and it works off a “product” range and a “ date” range – again this pretty much works as intended.
Sub IMPORT2() Dim nDate, nProd With Sheets("Forecast Toolkit") nDate = Application.Match(.Range("O31"), Range("Dates")) + Range("Dates")(1).Row - 1 nProd = Application.Match(.Range("I3"), Range("Products")) + Range("Dates")(1).Column...........................
Normally when a code copies a cell value from Workbook-A, closes Workbook-A and then pastes the value into Workbook-B it works flawlessly. However, i noticed that this doesn't work in all case, for example when a code repeats itself with the "For - Next" function then when the code copies from one workbook to the other it causes an error.
Here is my code and i made the part of the code that is red is where the issue lies.
Here is the file rCell.xlsm, in order for the code to execute you need to select the green cell. When you hit the macro a copy of the workbook is placed on your desktop. The code then tries to copy a range from the copied workbook and paste it in the original macro workbook. The pasting part is crashing. In the code i marked the issue in red.
I used a posted code to copy web query data from sheet2 to sheet1. Then a friend modified the code in order to Copy it to a new row in Sheet1 instead of a new column. The code works perfectly but I really wish that when the data is copied from Sheet2 to Sheet1 it will be only Values in order to keep my formulas and formats.
I read about .PasteSpecial xlPasteValues but I don't seem to find where exactly I should write it within the code.
I'm using code that SHG provided for me here; http://www.excelforum.com/excel-programming/630464-sheet-macro-for-preventing-paste-not-working.html
It worked great in the first workbook I set up but I just set up a new workbook and it's not doing the same thing. For example, it allows me to copy items from column A which have 1 type of validation (restriction on text) to another column which has a formula validation.
It still won't allow me to paste from outside a validated range to inside but I need to prevent people from screwing up the validation between columns.
Everything works in the script. It is a little slow on some of the users pc's.But they discovered a problem when they paste more than a couple values ,the workbook locks up.
1 I like to know how to speed this up? 2 I would like to understand as to why excel locks up.
You can recreate the lock up by picking a name from the drop down list in column A5 then Copy that name and paste in A6 To A10. I'm using Excel 2002.
I have a simple code that opens 2 workbooks and then copies and pastes a cell from one to the other. The cell that's being copied is a formula by the way.
My problem is that the copy and paste keeps returning a "0" value, instead of the correct number. I am thinking it's probably because the file from which it is copied is very large and because the operation barely takes a second, it doesn't allow it enough time for the formula int he cell that is being copied to calculate the value.
I have the following script which will copy data from one worksheet to another sheet. The data in the first sheet is filtered and therefore it is pasting #n/a in the blank cells of the second sheet.
IMPORTANT: I already can do this with multiple lines of code, however just out of curiousity I was wondering if it could be done with the one line of script and to not have #n/a in blank cells.
HTML Code: worksheets("BBB").range("A1:E65000").value = worksheets("AAA").range("A1:E65000).specialcells(xlcelltypevisible)
I dont know the correct terminology with whick to phrase my question, but I would like to know if its possible to copy say columns A-J on "worksheet A", and copy columns A-J on "worksheet B", each of which have different column widths, and paste them both to "worksheet C"?
My problem is columns A-J on "worksheet A" are perfect and copy and past fine to "worksheet C". But when I copy columns A-J from "worksheet B",which have different widths, and paste them to "worksheet C" right below what I had previously pasted from "worksheet A", the column widths interfere with each other.
I have tried a special paste, and it seems to re format everything above the current page its pasting?
I have the following bit of VBA code which copies a particular cell and pastes it in the next available cell in column "AD", but I need to paste it as a value. How do I incorporate this into the code?
Sub copypaste() Worksheets("USD IR Swap 10 Yr").Range("L5").Copy _ Destination:=Worksheets("USD IR Swap 10 Yr").Cells(Worksheets("USD IR Swap 10 Yr") .Rows.Count, "AD").End(xlUp).Offset(1, 0) End Sub
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I want to automate the transferring of specific pieces of data from one spreadsheet into another spreadsheet. There are many project spreadsheets that all feed into a resource plan spreadsheet showing every employee, what projects each of them are on, and how many hours they are spending on each project for the quarter.
Now what I would like to do is to automate this process of feeding the data from the many project spreadsheets into the resource plan spreadsheet. With transferring the specific data from the one to the other. Basically I need it so that excel looks at the project spreadsheet copies the name of the employee and the hours they have worked each week for the quarter and paste It into the big resource plan. What I am finding tricky is knowing how to make it automatically paste into the right area as in copy an employee and paste the details in the same employees cells in the other spreadsheet.
I have code that pulls information into excel from a database and pastes it into a sheet called paste.
This will have around 15 columns of data, with 24 rows for each day. The first column is the date and the second is the amount of sales which was taken in that hour.
I would like to add code to my project that will take all items in the 2nd column that are next to yesterdays date which will be in the format yyyymmdd sum the items to make a total and then paste into a column on another worksheet they will need to be pasted into the next empty cell in that column on the other worksheet.
After the number has been pasted into this column I need to clear all of the data on the paste page ready for it to be updated again the next day.
VB: Sub GetSomeData() Dim db As Database Dim rs As Recordset Dim SQL_string, Path1 As String
I have a data sheet and I usually copy manually the values from different columns. I would like to paste them into another worksheet so that when I paste the values in Column A, I should not surpass Row100, and if so then the code should automatically shift to column B and start pasting. This should apply to all the columns till column F. Once column F is full till row100 then the procedure should start again from column A.
I have 4-5 worksheets (sheet1,sheet2,etc) on a workbook. All of the rows except for the ones that are filled in are currently HIDDEN.
I have one worksheet called "Add record" which has a VBA code that adds a record to any of these sheets.
When it does this I want it to recognise when pasting the new record into any fo the sheets.. IF the row is hidden, the sheet needs to reveal that row.
I'm desperate trying to get this to work!!
Here is the code I have so far! This is a command button macro used in the "Add Record Sheet" I have FOUR different versions of this code. Each one adds the data to a specific sheet.
What I have is a workbook where I have to filter on a column called "Code" in a worksheet called "Current" and search for varies criteria and then copy these filerted rows and paste into a worksheet called "Past" and then delete the orginal rows form the "Current" tab.
e.g. filter on a column called "Code" and filter on the criteria that match "Monday", "123" and "Customer Accepted" and paste at the bottom of the "Past" tab and then delete from the "Current" tab. A message should then be displayed saying "Data Transferred OK" with the curser then highlighting "A1" on the "Current" tab.
The only cavat is that the code may find none, some or all of the required criteria, however, in the event of finding no matching data then a message should then be displayed saying "No Data Found" with the cursor then highlighting "A1" on the "Current" tab
As I have to repeat this to filter on various columns for various criteria I intend to modify the code accordingly, however, in once instance I will have to filter on a column called "Code" and filter on the criteria 1,2 and 3 etc but then I have to do second filter on column called "Code Extra" and then do a filter on the criteria 4, 5 and 6 so the additional code would also be good.
I am having problems with a macro I am writing and I need some guidance on where I am going wrong (I am still a noob at VBA).
I have pasted the code below (not the most efficient use of code I know).
I have a list of departments and codes from the Intranet at Work. Now this contains a Department Code, Department Description and within the Description is a number in brackets showing how high up the organisation hierarchy they are....
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
In any cell of a worksheet, the user can input a number followed by either a plus or minus sign. After the - or + key is pressed, the cell has to move the plus or minus to the front of the number, then move down one cell. So input in cell A2 would be 125+, that needs converted to +125 and then moved down to cell A3.
