I am trying to write a macro that Copies the last row of data in one sheet and Pastes it into the first open row. I'm assuming I can't do it with the macro recorder because I wouldn't be specifying the last row and first row. Does anyone know what the code might be for these actions
View 9 Replies
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedI have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
I would like to copy all the items below the ITEM row and paste it to cell A2 of another saved workbook (say, Saved.xls).
If Saved.xls is closed, the macro would open it and paste. If it is open then it will just paste.
I m getting problem when i Open workbook and paste that match address
View 5 Replies View Relatedhow to go about taking data from a closed workbook with a range say A1 to A100, and place it in the work book i have open. I have 3 different sheets in the open work book but all the data is coming from the one sheet in the closed workbook.
View 9 Replies View RelatedI am trying to have Excel 2007 open a Word Table, Select All, then Copy and paste to the open workbook. Here is what I have so far:
Sub Comments()
Dim objWord As Object
Set objWord = CreateObject("Word.Application")
objWord.Visible = True
objWord.Documents.Open "R:JohnstonOfficeProductionSO COMMENTS.doc"
Selection.WholeStory
Selection.Copy
Right now I and getting an "Type not defined" error and the Dim oData As New DataObject step. Also if delete the code to clear the clipboard, I get an error at the WholeStory step.
I am trying to have a macro that separates a list with unique values in column a, copy the results, open a file name in column AG, and then paste the copied stuff into the open workbook.
Currently, it runs, but when I copy to the new sheet, the thing I want goes where I want it to, but I also get an extra sheet1. how can i change this so the sheet1 doesn't get pasted in?
Sub MC()
Dim r As Long, rng As Range, ws As Worksheet
Application.DisplayAlerts = False
Application.ScreenUpdating = False
ActiveSheet.Name = "Sheet1"
With Sheets("Sheet1")
Sheets.Add().Name = "temp"
[code]....
Trying to find a set of code that I can use to open a website that's predetermined, and enter in the users name and password automatically. And if possible, open a new email via the website, addressed to a person, and ready to browse for the file to attach.
The code I have is below.
Private Sub CommandButton1_Click()
'
storenumber = [$c$3]
If [$iv$2] = True Then
If [$iv$3] 0 Then
MsgBox ("Can't send with No Adjustments Checked & Items to Adjust, Please clear one")
End
End If
End If..................
I have a cell in one worksheet xxx in workbook XXX column F selected
I want to run a macro that will open (if not already open) Worksheet yyy in workbook YYY (in C:/Test/ directory)
And copy values from columns B and C of workbook XXX worksheet xxx (the row determined by the cell selected in the F column) to columns D and G respectivley of workbook YYY worksheet yyy
I'm hoping the data will be pasted to a new row at the bottom of all existing rows on worksheet yyy (xlup?)
If multiple cells in column F worksheet xxx are selected, it would be nice if the data was sent over to yyy in the same fashion, ordered top to bottom all at once...I don't want to have to select each row individually and run the macro
Am working on a procedure to open all files in a folder and copy some data from the files into another workbook (master). I have this piece of the code. However, I also need to get the filename (from which data was copied) and paste this into an adjacent cell in the master (so I know which file each data point came from).
View 8 Replies View RelatedIs it possible, in vba, to copy two sets of cell values to two clipboards (clipboard1 and clipboard2?), open another workbook and paste those two seperate clipboard values into another two cells?
View 3 Replies View RelatedWhat i need to do is Open a Closed workbook (which i have done in the code below)
1 . When this book opens there is a msgbox that needs to have "template" pasted in to then ok automatically clicked ( i have no clue if this can even be done)
2. Then go to Sheet("contactor info") find last row then paste certain info. Below is a peice of code i have from the open workbook but of corse it doesnt work. The red is where it hangs up.
openpath = ActiveWorkbook.Path & ""
Set wb = Workbooks.Open(openpath & "Template.xls")
With wb.Sheets("Contractor Info")
. Cells(Sheets("Contractor info").Rows.Count, "B").End(xlUp)(2, 1).Select
ActiveCell.Value = Msg1
ActiveCell.Offset(0, 4).Value = Msg2
ActiveCell.Offset(0, 5).Value = Msg3
ActiveCell.Offset(0, 3).Value = Msg5
ActiveCell.Offset(0, 2).Value = Msg4
ActiveCell.Offset(0, 1).Value = Msg6
ActiveCell.Offset(0, 6).Value = Msg7
Application.Calculation = xlCalculationManual..................
In my consolidating spreadsheet there are 6 columns that show the file path, the worksheet name, and cell range to copy. There can be an unlimited number of rows (each row represents another path). I would like the VBA to copy/paste values from each range specified in each row and copy them into the consolidating worksheet named "copied".
Each time the VBA copies/paste values from the cell range specified in each row it needs to copy below the previous copied and pasted information in the worksheet named copied.
In the worksheet with the file paths etc shown below (named "list"), I would like the VBA to show the Date and Time each piece was copied and pasted. For each path I would like to show in the last column if the copy and paste operation was successful ("yes" or "no"), this is more or less the error handeling....
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I'd like to know if it is possible to run a macro in a workbook that will open another workbook (of the users choice) extract data from it, such as columns from its sheets then paste that data into the workbook the macro is running from. The file to be opened will change, so i've found some code that enables the user to select the file to open then open it.
Dim strFile As String
strFile = Application. GetOpenFilename
If strFile <> "False" Then Workbooks.Open strFile
This brings up the standard windows choose file to open box, then opens the selected file. Am I correct in thinking that the Dim here will store the file name I select in the open file box? If so, I'd like to know how to select the workbook using the dim so I can manipulate it from the workbook I'm running the macro in. Incidentally, once the the data has been copied, I'd like the workbook opened with the macro to be closed.
I need to error check to see if a worbook is open or not. if it is not open i need it to open it. i supplied the code i am trying but it is not working. I keep all my workbooks in XLSTART.
View 2 Replies View RelatedI could need a code (WS code I assume) that open the sheet in 70% zoom every time I open that sheet. For now I get in 75% every time I open it. I guess that WS code will bypass that default setting, or bug, or what ever resets it 75%.
View 9 Replies View RelatedIn the attached file, I have a code to open several files which have the same format, sheet name. The copy and paste the contents to the attached file.
It’s ok to open the first file. But it got problem to open the remaining file. The warning says it can not find the file name even the file exits.
I can use the following code to open Notepad from Excel Vba:
Dim retval
retval = Shell("NOTEPAD.EXE " & Filename, vbNormalFocus)
how to open Hyperterminal using the above method. I tried
Dim retval
retval = Shell("hyperterminal.EXE " & Filename, vbNormalFocus)
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
View 5 Replies View RelatedI have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
I have a macro to get copy of sheet named "Doc Info" from workbook File 1 to active workbook.
I could do it for one file on any active workbook.
But what I would require is, upon executing this macro , i want this macro to get executed in all open workbooks( could be any numbers ).
I want to move copy of sheet from File 1 to all open workbooks ( which i am doing it manualy for every file )
All these open workbooks could be from any folder , wont be in same folder.
So logic is to execute my macro apply in all open workbooks in my computer.
Below is the code and i have attached file for test
HTML Code:Â
Sub Copysheet()
Dim wSht As Worksheet
Dim wBk As Workbook
Dim wBk1 As Workbook
Set wBk = ActiveWorkbook 'Workbooks("File 2.xls")
Set wBk1 = Workbooks("File 1.xlsm")
Set wSht = wBk1.Sheets("Doc Info")
wSht.Copy before:=wBk.Sheets(1)
End Sub
this is a bit of the code that should open a file, but the thing is tha I am trying to open a shortcut file. not a normal one. so I alway get an error that say tha tis not possible to locate the file. does any body knows how should I do to open the shortcut file?
View 4 Replies View RelatedI have Created an Excel Spreadsheet to work as a EPOS system. The only Problem i am having finishing it off is getting the cash Drawer to open at the end of a sale.
I have my Cash Drawer connected via a Rj 45 in the Back of my Receipt Printer. The Printer i have is a Star Tsp-600. I have Found out that the Open Drawer Codes are 7 or 27,7,10,50,7. I am not entirly sure what they mean though. The code that i have at the moment doesnt work it brings an error "53" file not found. This is my code
I have a sheet which i made ages ago and cant remember my pw. I can goto the alt, F11 select the macro and run it which i have set from all sheets to hide, and i can change the wording on the sheets but i cant open the code.
Does this mean i will have to forget about it unless i remember the pw?
