VBA Code To Pull Data Multiple Times Into Master Sheet?
Feb 20, 2014
Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
View 12 Replies
ADVERTISEMENT
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Apr 2, 2014
I found the code below and it works perfectly if I want to copy all the other sheets to a master sheet. But, I need to specify specific sheets. Basically I have a workbook consisting of multiple sheets and multiple "master" sheets so I need to specify in the code which sheets it should be copying.
[Code] ........
View 5 Replies
View Related
Aug 8, 2014
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
View 5 Replies
View Related
Feb 26, 2008
I've got a master excel sheet with about 6000 rows of unique variables. In separate source files, I have many rows of these variables with information next to each. Each file has a random number of these variables, some a couple of hundred, some a thousand or two.
What I'm looking to do is to have the master sheet with all 6000 rows and have all of the information next to each variable, with new columns for each new bit of information.
I could sit there for hours copying and pasting each new bit of information to the relevant variable in the master sheet, but I'm convinced there's a quicker way. Is there, for example, a way to filter the master sheet based on the variables contained in one of the source files and therefore (once a-z sorted) copy all the information from a source file and simply paste it into the master file? Then once the filter is lifted the same can be done for the next file (there's only about 20 source files so that's manageable).
View 7 Replies
View Related
Feb 16, 2010
I have the job of producing a survey in Excel and collating the results anonymously, to help with this I'm looking for a chunk of code that will enable me to pull a specified range of data from all the files in a particular drive with a filename starting with a specified word and insert them all in to the same blank sheet.
View 6 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Jan 26, 2010
I am usuing INDEX and MATCH to pull back employees hours from a master sheet, I am asking excel to Index, matiching firstly the agents name and then the day of the week (Formatted: Mon,Tue,Wed,Thurs,Fri,Sat,Sun). This works perfectly for every day of the week using the following formuls except for Sun where it returns #REF!
=(INDEX(Hours!$B$4:$G$166,MATCH($F$1,Hours!$A$4:$A$166,0),MATCH(C7,Hours!$B$3:$H$3,0)))
View 2 Replies
View Related
Aug 24, 2013
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
View 8 Replies
View Related
Oct 10, 2013
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
View 1 Replies
View Related
May 15, 2006
I have an identical worksheet for all the days of the month - i.e. the May workbook has 30 identical worksheets. I am wanting to pull only certain rows from each worksheet onto a master. Something like - copy row from all worksheets where that rows cell "D" has any value other than " ".
I have used the following macro to pull all the data from every sheet onto a master - but i don't want all the data - just the qualifying data.
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add ' add a sheet in first place
Sheets(1).Name = "ALL"
I am not sure what the range "A1" is - i am thinking i can modify it to only grab certain rows.
View 9 Replies
View Related
Apr 24, 2008
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
View 9 Replies
View Related
Apr 26, 2013
Is there any way that multiple user are using different excel based user form and update data using that. Is there a way that all the user save the data directly on the main database?
View 6 Replies
View Related
Jun 16, 2014
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
View 6 Replies
View Related
Oct 3, 2012
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number
C12000
PM
Abe Lincoln
Foreman
Thomas Edison
Contract Date
1/1/10
View 1 Replies
View Related
Feb 5, 2013
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
View 4 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
View Related
Jun 11, 2014
In this workbook Test1.xlsm under column "D" i have Po numbers. Some PO numbers are the same and some aren't. I have a specific code that creates an invoice for a customer when i hit the code however i must select a cell under column "D" in order for the code to create an invoice for the customer on that row. I usually create the invoice for all the customers of the same PO number. Sometimes the amount of invoices i have to create is overwhelming so i was wondering if it's possible that when i select a cell under column "D" that has, let's say, PO number "654" if the code can create an invoice for all customers that have the same PO number of "654"?
View 1 Replies
View Related
Mar 21, 2009
I have a folder that contains many workbooks that contain the same layout of information just with different workbook names. Im looking to copy certain customer information from each WB to a master sheet, such as name, adress, city, ect.
-Folder to lookin for all WB's information - D:Documents and SettingsRonMy DocumentsNew Folder (3)
-The sheet to copy the info from in each WB is named "Quote"
-The ranges to copy are B5:D5, B6:D6, F6:I6, K6:M6
-I want to use a command button to trigger the code and copy the info to the open WB on Sheet12.
-The info going into in sheet12 is layed out across each column.
Example of Sheet12:
A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6, so each copied WB will used the same layout and just copy to the next line.
Example :
A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
A2 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
A3 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
View 9 Replies
View Related
Apr 9, 2013
I will have about 100 files to merge together that are in one directory. Is it possible to merge all workSHEETS named "Bob" from each workBOOK and end up with just one master file?
I found this code on this web site (no proper reference!). It doesn't work for me. Yes, I changed the directory and it still didn't work. I will have 12 columns (A:L) and differing # of rows in each "Bob" worksheet.
VB:
Sub g_CombineMultWB_AllXLSFiles() ' This Will combine all EMALL XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
[Code]....
View 3 Replies
View Related
Mar 10, 2014
Is there a posibility that using VBA i can group sheettabs (Sheet 1, Sheet 2, Sheet 3) into 1 single master tab (ex. "MASTER") ?
Since I will be having 20 sheets in a excel file I would like to group them together.
View 4 Replies
View Related
Feb 6, 2008
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
Sep 26, 2013
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
View 8 Replies
View Related
Apr 7, 2011
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
View 6 Replies
View Related
Jan 15, 2014
I am creating a spreadsheet to track customer data and need to reference certain cells in individual customer tabs to a master sheet that contains every customer. Each customer will have his own tab, each tab having the same layout, and each client will also have their own row on one master sheet within the same workbook.
My question is, is it possible to reference the specific cells in the clients individual tab to the master list once, and then everytime I copy a new client tab, the referenced cells in that tab are immediately referenced to the corresponding client (new) row in my master sheet within the same workbook?
View 3 Replies
View Related
Apr 20, 2013
the code below was created by: JoeMo I'm trying to adapt, but I need to say which worksheet you were to NOT be copied
Code:
Sub MergeSheets()'Author: JoeMo
'http://www.mrexcel.com/forum/excel-questions/683803-copying-data-multiple-sheets-appending-master-sheet-reverse.html
[Code].....
View 1 Replies
View Related
