Macro To Pull Data From Dynamic Named Multiple Worksheets Weekly Into A Master Sheet

Jul 11, 2014

Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.

The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.

for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.

In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.

This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")

Next, need to manually change cells C2:G2 each week to reflect week titles correctly.

For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.

The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).

View 1 Replies


ADVERTISEMENT

VBA Code To Pull Data Multiple Times Into Master Sheet?

Feb 20, 2014

Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet

i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also

SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.

[Code] .....

Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls

View 12 Replies View Related

Pulling Data From Multiple Worksheets Onto Master Sheet

May 15, 2006

I have an identical worksheet for all the days of the month - i.e. the May workbook has 30 identical worksheets. I am wanting to pull only certain rows from each worksheet onto a master. Something like - copy row from all worksheets where that rows cell "D" has any value other than " ".

I have used the following macro to pull all the data from every sheet onto a master - but i don't want all the data - just the qualifying data.

Sub Combine()
Dim J As Integer

On Error Resume Next
Sheets(1).Select
Worksheets.Add ' add a sheet in first place
Sheets(1).Name = "ALL"

I am not sure what the range "A1" is - i am thinking i can modify it to only grab certain rows.

View 9 Replies View Related

VBA - Appending Weekly Worksheet Data To Master Sheet

Feb 21, 2014

I've a workbook with two sheets 1)'weekly' and 2)'summary.'

Weekly is divided into products (up to a maximum of 8) with a fixed number of columns (4) directly below but a varying number of rows beneath as follows:

Product A (main header)
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data

--couple of blank rows--

Product B
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data

--couple of blank rows--

Product C
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data

..etc...

This weekly data must be appended into each product's respective grouping within the 'Summary' tab. With the following small additions: 2 additional columns filled with the model and current week must be inserted beforehand:

Product C
Model|week|Issue|Serial Number|Analysis|Comments
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data
Product C|7|data|data|data|data

Summary page will contain the groupings of Product A through H. The weekly may only contain 1 (say Product D) in any given week, or all 8.

I realize there are more efficient ways of doing this, i.e. pivot tables, creating discrete tabs for each product, etc... but I've been tasked by the higher-ups to generate the above as I've laid out.

View 7 Replies View Related

Pull Data From Different Worksheets With Identical Format To One Master Worksheet

Mar 6, 2014

My query is;

I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.

So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.

Hope I am quite clear with my query. with the required function to ease my life?

View 4 Replies View Related

Pull Data From Two Sheet And Paste Into Master Sheet With Desired Column Only

Aug 28, 2013

I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet

e.g i pull data from two sheet(ONSITE&CCI)

SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT

View 1 Replies View Related

Macro To Pull Data From Multiple Sheet To Main Sheet Based On Column Headings

Sep 13, 2012

I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.

View 8 Replies View Related

Consolidate Multiple Worksheets Into A Master Sheet Same Workbook

Jul 22, 2008

l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.

View 9 Replies View Related

Returning Match And Adding Values On Multiple Worksheets To A Master Sheet?

Aug 4, 2012

how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.

View 4 Replies View Related

Auto Copying Entered Preferences From A Master Sheet To Multiple Worksheets

Jun 26, 2009

I have a master page with A1 containing the names of staff members and then 5 columns indicating preference1 .... preference5. Each preference column will have one 4 digit site code i.e. 8156 entered. I will have 64 worksheets matching all potential 4 digit site codes that could be entered in the preferences columns.

SAMPLE - one staff member entering 5 site codes (A1 to A6)

Billy Bloggs - 8124 - 8456 - 8456 - 8123 - 8882

What I am looking for is a way to autocopy the persons name to the appropriate worksheet and into the correct preference column as I enter the 4 digit code against the staff members name on the master sheet.

View 3 Replies View Related

Pull Information From Master Database Into Seperate Worksheets

Oct 24, 2008

I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.

View 9 Replies View Related

Consolidate All Data In Multiple Worksheets Of Multiple Workbooks In One Master File?

Jul 12, 2014

I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.

All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.

I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...

View 4 Replies View Related

Bringing Data From Mulitple Worksheets To A Master Sheet

Jun 10, 2008

Each salesman has an enquiry log / hot prospect sheet that they are responsible for.

At present at the end of the month our receptionist has to consolidate this information manually onto a master sheet.

I would like to create an automatic master sheet that auto updates each time it is opened.

It has to read data from about 13 work books each with varting amounts of date. All works books are formatted identically (or they will be)

View 14 Replies View Related

Copying Data From Multiple Worksheets To A Master Worksheet

Jun 22, 2009

I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.

View 3 Replies View Related

Populate Data From Multiple Worksheets Into A Master Workbook

Feb 8, 2009

I have a master workbook with 20 worksheets. 5 worksheets in the worksbook are distributed to field reps, but the remaining 15 worksheets are not. What is the best practice for receiving the 5-worksheet workbook from the field rep and importing the data into the 20-worksheet master workbook? If I merely use Copy Sheet I am able to copy the worksheets into the master workbook but then I have to remove the pathname references in each of the copied worksheets in order to map the data in the master workbook - which is quite cumbersome.

View 9 Replies View Related

Conditionally Copy Data: Master Worksheet To Multiple Worksheets

Sep 11, 2006

I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)

For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.

View 4 Replies View Related

Copy Data From Different Sheets Weekly Into Master List With Data Of Whole Year

Mar 8, 2014

We have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)

I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).

The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.

I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?

In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).

Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.

DCC foler.jpg

View 10 Replies View Related

Macro / VBA To Pull Data From Worksheets Based On Name

Jul 10, 2014

I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.

Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).

Column A Column B
PIN
CID
SIP

View 9 Replies View Related

Selectively Pull Records Into Master Sheet

Feb 26, 2008

I've got a master excel sheet with about 6000 rows of unique variables. In separate source files, I have many rows of these variables with information next to each. Each file has a random number of these variables, some a couple of hundred, some a thousand or two.

What I'm looking to do is to have the master sheet with all 6000 rows and have all of the information next to each variable, with new columns for each new bit of information.

I could sit there for hours copying and pasting each new bit of information to the relevant variable in the master sheet, but I'm convinced there's a quicker way. Is there, for example, a way to filter the master sheet based on the variables contained in one of the source files and therefore (once a-z sorted) copy all the information from a source file and simply paste it into the master file? Then once the filter is lifted the same can be done for the next file (there's only about 20 source files so that's manageable).

View 7 Replies View Related

INDEX And MATCH To Pull Back Employees Hours From A Master Sheet

Jan 26, 2010

I am usuing INDEX and MATCH to pull back employees hours from a master sheet, I am asking excel to Index, matiching firstly the agents name and then the day of the week (Formatted: Mon,Tue,Wed,Thurs,Fri,Sat,Sun). This works perfectly for every day of the week using the following formuls except for Sun where it returns #REF!

=(INDEX(Hours!$B$4:$G$166,MATCH($F$1,Hours!$A$4:$A$166,0),MATCH(C7,Hours!$B$3:$H$3,0)))

View 2 Replies View Related

Have Data From Multiple Sheets Automatically Go To Master Sheet

Aug 24, 2013

I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.

See attached file for sample

Sample.xlsx

View 8 Replies View Related

Updating Master Sheet With Data From Multiple Sheets

Oct 10, 2013

I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.

Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added

AAB08
AAB09
AAB10
AAB11
AAB12

[Code] .......

So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this

AAB08
AAB09
AAB10
AAB11
AAB12

[Code] ......

Is this possible?

View 1 Replies View Related

Copy Data From Multiple Sheets To One Master Sheet

Apr 24, 2008

I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.

Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range

Application.ScreenUpdating = False
Sheets("Master List").Activate

View 9 Replies View Related

Macro Pull Data From Each Sheet And Create A Summary Sheet

Jan 26, 2009

I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.

The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.

View 9 Replies View Related

Macro To Pull In Select Tabs From Many Files Into One Master

May 10, 2013

I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.

View 2 Replies View Related

Multiple User Save Data In The Master Sheet At A Time?

Apr 26, 2013

Is there any way that multiple user are using different excel based user form and update data using that. Is there a way that all the user save the data directly on the main database?

View 6 Replies View Related

Pull Data From Multiple Sheets To One Sheet If Criteria Met?

Jun 16, 2014

I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.

So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).

The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14

View 6 Replies View Related

Macro To Pull Data From 1 Sheet And Filter Into Another Sheet

May 14, 2014

I'm trying to get the data from Receipt log (sheet 1) to automatically populate into the Print Receipt (sheet 2) and to automatically filter and go to the Activity by account (sheet 3). I am so new to this and totally lost.

See attached sample : Student fees.xlsm

View 12 Replies View Related

Pull Cell Info From Workbooks In Server Directory And Paste Values In Master Sheet

Oct 3, 2012

I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.

I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").

I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.

Short Example of C1200* workbook in which data will be pulled from:

Job Number
C12000
PM
Abe Lincoln
Foreman
Thomas Edison
Contract Date
1/1/10

View 1 Replies View Related

Copying Data From Multiple Sheets And Appending Master Sheet - Reverse

Feb 5, 2013

Copying data from multiple worksheets, but my problem is quite the reverse.

I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..

Like 2012Dec,2012Nov...............1970Feb,1970Jan

I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.

I was able to do a rough code, but I am stuck doing the reverse part...

Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert

[Code] ..........

Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved