I have the job of producing a survey in Excel and collating the results anonymously, to help with this I'm looking for a chunk of code that will enable me to pull a specified range of data from all the files in a particular drive with a filename starting with a specified word and insert them all in to the same blank sheet.
View 6 Replies
I need a macro which collects data from two files and dumps it into a separate spreadsheet. I need it to prompt the user to select the two files, since the file names may change.
Once a user selects the files, the macro simply opens them, grabs the data (the data sits on a single sheet in each file) and pastes it into a file, and closes the 2 data files.
The Data sits in A7:N20 on both files.
Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
Scenario; I have 3rd party software that pulls reports in .csv files. I want to summarise this data into another spread sheet. Ideally I would like to save these files into a folder on the network and my summary workbook simply looks for this folder and is able to find data within all Excel files saved in there (new files will be added on a monthly basis).
Once it has found the folder there will be 2 pieces of data to evaluate; Cell $B$1; this will be the name of a course (e.g. health & safety, money laundering etc.) Column $D; this will contain the score achieved by multiple learners.
The summary spreadsheet then averages all of the scores for the different courses(in seperate cells)
The idea is that the .csv files can be pulled and saved into said folder and eliminates the need to manually input this data into the summary spreadsheet.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I've seen a lot of code on how to pull data from workbooks in the same folder. However, I'm trying to pull the data in workbooks in various folders.
For examply, I have one folder, called "Master Files". In this folder is 12 folders, one for every month of the year. Within these folders, is one for each week, with the last day of the week being the name for the folder. In other words, it's like \Master FilesApril4-6-07data.xls
Now, I know how to get the data I need if all files are within the same folder. But how would I write a macro to run through all of those files when they're in separate folders?
I have a list of file names in Excel and I need to move the files from one folder into another. Sometimes I'm having to find and move hundreds of files into different destination folders, hence why I would like a macro. My spreadsheet will be something like:
Column A
Column B
Column C
Row 1
File name
[Code]...
I have a bunch of workbooks in a folder and I'm basically trying to take the average of the same specific range for each file. I have somewhat of a method for doing this where I separate it into several steps and grab bits of code for each step (there's descriptions on the code). How I can improve or streamline it?
Code:
'STEP 1
'run this first to combine multiple files/workbooks into one file
'Change MyPath to the folder location
Sub Merge2MultiSheets()
[Code]....
I'm working on a sheet trying to keep track on which client is working with which employee. The first sheet shows tracking for the year and each additional sheet is the month. Basically the Yearly sheet is there so I can quickly control+f "client name" and see which employee he or she is working with.
I attached a simple version of the workbook but basically it basically looks like this: Yearly sheet - Row 1 is the employees name, Row 2 is the month, and the rows after that are the clients name until it gets to the next month. January sheet - cell A1 says client, Cell B1 says employee. I'm inputing the clients in column A and the employee in column B and using this formula for the Yearly sheet (starting in row 3) =IF(January!$B2=Yearly!A$1,January!$A2,"")
This is working for what it's supposed to do, but it's not pretty and leaves a lot of of blank cells. Is there a simpler way of doing this?
YearlyClientsEmployees.xlsx
I have several excel spreadsheets by which I would like to add together certain values in the column with the same columns of all the other excel spreadsheets. So basically, If one of the values are "SELF" , I would like to calculate how many times that value occurs in all the spreadsheets. Any easier way to organize the data to be able to do this also.
View 1 Replies View RelatedI had a friend attempt to help me with this issue but he couldn't figure it out. He suggested that I tried asking around here.
Here is what I am trying to accomplish:
(I am happy to email anybody the spreadsheet to help out with this description)
1. There are two spreadsheets. One spreadsheet with about 25 tabs (one for each store number) and one spreadsheet with one tab and about 1400 lines of information that is sorted by store number. To preface, this 1400 line spreadsheet can be 900 lines one month and 2500 another month, so it fluctuates.
2. From this spreadsheet sorted by store, I will highlight, cut and paste into the corresponding store tab on the first spreadsheet. Also, at any given month, the information fluctuates, it can be 15 lines for one store one month and another month it could be 5.
3. Once I am done cutting and pasting it all into each seperate tab, I have a 26th tab that I am looking to create a button that will then pull all that information into the 26th tab.
I know - first question is why would you want that? You already have all the information from that original spreadsheet. Well, in these store tabs, I have everything perfectly formatted a certain way and I only really cut and paste the information that I need from the 2nd spreadsheet.
I have a spreadsheet that my friend claims he got close to working it out.
Just to add, I would need this button to take into account that the information in each tab fluctuates and also that it is easy to add a tab if I add stores.
I am trying to Loop Through a Folder Of Excel Workbooks and get required Info from one of the workbooks, back to my Master File.
I thought of "VLOOKUP" but I am not shore if it will work over Approx. 60 workbooks? if there is an other or better approach, I am open to all Ideas.
So far I have code to Open my Master and declare the criteria for the VLOOKUP with the help from:
Re: Run A Macro On All Files In A Directory
--------------------------------------------------------------------------------
See also this page on how to loop through a folder
Loop Through Folder Of Excel Workbooks
_________________
I am now able to open all Files in the sub directory, now I need to know how to approach my problem of looking for and getting the Info back to my Master File with approx. 5000 entrys to look for?
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
So I am trying to pull data from multiple sheets. I've gone through the thread, but haven't found an answer yet (or didn't work hard enough). On Sheet1, yellow highlighted column, I am trying to look up the I.D. Code for 36 month residuals. As you can see, I have to use multiple conditions on different worksheets.
I have to use most of Sheet1 columns to find the answer. I just can't figure the formula out.
I don't have Excel 2007, only 2003 I have.
I'm trying to compile a spread sheet that will pull the play by play logs from the NHL website.
The logs are listed in order.
Game 1 is [URL]... Game 2 is [URL]... etc etc
I am trying to put them all on one spreadsheet. (or to do it in batches of 100, or 50 or whatever the size of the file allows)
As part of report consolidation I need a Macro that can read through all the files in a particular location(Say a folder path) Pull the data for each unique products into separate sheet
In the example below : All the rows with "Chocolates to sheet 1" , Drink to Sheet 2 and so on Since the products in column 3 can vary the unique sheets need to be created at run time based on the source data
Workbook1
WEST
100
Chocolates
[Code]....
I have one main Excel file with information (in example file - columns A & B). I want to create 4 other Excel files that will draw from the main one (in example file - columns D, F, H, & J). I want the information in Excel file A, B, C, and D to be continuous information that matches the main file. For example, the letter A matches up with numbers 1,3,4,10,11,13,15,17, and 19 in the main file. When I open Excel file A, I want a continuous list of these numbers. And I want this for all 4 Excel files which draw from the main one.
View 2 Replies View Related I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
I have six files that are formatted the same(fld1-1.xlsx, fld1-2.xlsx...). Each file contains an I.D. number (random 25 digit number) in column A and a note (1-9) in column B. The only thing that changes between files is the note column. I want to pull from these six files into a master file. When all six files are combined the note column in the master file is complete, there are no duplicates. Because a blank vlookup returns a zero, could I use an IF formula. Something like IF VLOOKUP FROM data01(ISNUMBER(0), then vlookup in file data02. IF VLOOKUP FROM data02(ISNUMBER(0), then vlookup in file data03.
View 5 Replies View RelatedI have two macros one of which imports the data and the other processes the data. These macros were created at different times and need to be joined into a single macro that will combine their operations – with slight modification to the importing macro. Let me describe what each of the macros does:
PROCESS macro:
Cycles through the CONTROL CELL on the “1” tab using the VALUES TO TEST. For each value to test it copies the values form the output tabs and pastes them into the A+B tab. Then it removes the duplicate rows there.
Option Explicit
'======================================
Sub PROCESS() 'This subroutine is called when clicking on the first button
Dim i As Long, j As Long, k As Long 'Those are the variables that will browse through the whole sheets
Dim l As Integer 'this will be used to browse through the values to test
Dim TheSearch(1 To 2) As Object 'This is an array of objects that will be used for the search
Dim TheRange As Range 'This will be used to flag the range of duplicates in the output
'Searching for the Text string 'VALUES To TEST' in the sheet "1" in order to know where the array of values to be tested start
Set TheSearch(1) = Range(Cells(1, 1), Cells(ActiveSheet.UsedRange.Rows.Count + 10, ActiveSheet.UsedRange.Columns.Count)).Find(What:="VALUES TO TEST", LookIn:=xlValues, Lookat:=xlWhole)
I am trying to do is write a macro that will pull two tabs labeled "XXXXMarch" "XXXXPTD" (the x's represent numbers) from each file within a designated folder and copy them into a master file.
View 2 Replies View RelatedI have about 7000 Excel files that I need condensed to one file. The data shown that I need in example one. In this example the data needed is in column B20 then B3-B19. My problem is the data in B20 is sometimes above or below.
In the other attached file(ExampleOutput) is how I am trying to get the data outputted.
Do you think that a macro/script con go thru all 7000 files automatically in a row to do this?
I have to delete data from D15 to AZ129, D168 to AZ282, D312 to AZ426 in 46 excel files, saved in the same folder. I go through the process manually by opening each file and then deleting data.
View 14 Replies View Relatedway to take the data from a specific cell that is in the sheet1from every file and put those result in the A2,A3,A4,... cells in the sheet1 of new excel file.
View 13 Replies View RelatedI want to have a primary sheet that refers to two another sheet in the same document.
Basically, the person using the spreadsheet will tell the first sheet what data they're looking for from within the dataset contained in the second sheet and the third.
The first sheet will then have an area which it outputs which data matches the criteria.
Here's some specifics. It's for Pathfinder Deities. The user will input which domains they wish to use and the sheet will output which deities, if any, will be appropriate to select.
The second sheet contains all the Cleric Domains and which Deities are associated with them. The third sheet contains the alignment of each Deity.
If it was not obvious, in the first sheet, the player will indicate which Domains they wish to use for their character as well as the alignment of the deity they wish to use. Once they've indicated what their choices are, the first sheet will show which deities are available given their choices.
I'd prefer to do this without using macros, but if it's easier to use them, then I'll just have to go for it.
The screenshots are too large to post, so I'll just post my project: [URL] ......
I have multiple workbooks in a directory and I need to copy a range of cells from 1 particular worksheet in each workbook and paste the data into the " consolidation workbook (Lar.xls)" that contains the macro I'm working on. I have found the code to open & close all of the workbooks and I can even get to the particular sheet in the workbooks but I cannot select and copy the range of cells that I need (I cannot get it to select any specific cell on the worksheet). Here's the code I'm using, have tried many different variations with the same problem.
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
'Change path to suit
.LookIn = "C:Temp1"
.FileType = msoFileTypeExcelWorkbooks
'.Filename = " Book*.xls"................................
The below article explains exactly what I am trying to do but the formula in step 5 doesn't seem to work. I keep getting an #REF! Error.
[URL].....
I am not sure if maybe I'm typing in the quotations wrong or if the formula doesn't actually work.
I am trying to use the following formula to pull out data from multiple excel files in a folder called "Certificate".
='D:SSR Sec and Techcertificate[STUDENT 2.xlsx]Student Record'!$B$10
='D:SSR Sec and TechcertificatePath
[STUDENT 2.xlsx] File Name
Student Record'!$B$10 Sheet name and Cell reference
The formula works without any problem. I want to replicate the formula to extract the same data in multiple excel files. In this case only the second part of the formula needs to change to "STUDENT 3", "STUDENT 4", "STUDENT 5" and so on. I have created a column in excel with those values. I am trying to use the cell contents in the above "formula", but I cannot seem to replace this value in the formula. Needless to mention that I tried to drag the formula, but it does not work. I am attaching the two excel files.
Currently using the following code to "pull" a range data from a closed workbook.
[Code] ......
This works well if I know which workbook and sheet I will be getting the info from. What I would like to do is add a function that searches through a few workbooks looking for a worksheet name that matches a value in a cell in my original workbook.
ie. Workbook 1, cell A1 = "Jelly"
search through excel files for the workbook that contains the worksheet named "Jelly" and then copy a range from that worksheet back to workbook 1.
