Pull Column Data (Sheet3) From Master.xls And Paste To Column 4, Sheet4 Of WorkingSS.xls
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
ADVERTISEMENT
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Sep 15, 2005
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
View 9 Replies
View Related
Oct 3, 2012
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number
C12000
PM
Abe Lincoln
Foreman
Thomas Edison
Contract Date
1/1/10
View 1 Replies
View Related
Dec 5, 2012
I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
View 7 Replies
View Related
Nov 28, 2013
I need to segregate a data from a master file with a particular column as a main.
for eg:- i have customer details with name in a column
address in b
mobile in c column,stat and other details in other column.
I want to segregate data according to state in different excel so how can i do the same.
View 3 Replies
View Related
Apr 3, 2014
I got it when I click on the cell it loads the userform but it is populating with row data instead of column data.
I would like when I click on for example cell T4 and the userform pops up to see the textbox data going down the rows instead of across which is is currently doing.
so clicking on T4 brings my userform up filled in with information from
T5 and U5
T6 U6
T7 U7
T8 U8
T9 U9
I have when I click on the cell T4 column
label amount receipt
electricity 384.00 ZgHl2V
This way I can change amount or receipt and update my worksheet.
VB:
Private Sub UserForm_Activate()
Dim r As Long
r = ActiveCell.Row
[Code].....
View 2 Replies
View Related
Sep 23, 2006
I have stored production data in Column A. I want 5 data randomly pulled from that column with click of a button. Would this Happen?. I have attached an excel sheet.
View 2 Replies
View Related
Oct 8, 2013
The data exists in a spreadsheet that has Data from Column B2:CQ18, but it needs to be dynamic and update anytime someone clicks the button (the button is fine and works with all the other Macros)
Here is the code I have so far.
Code:
Dim LastCol As Range
Dim NextColPaste As Range
With Worksheets("Run Hours")
Set LastCol = Range("M3:M18").End(xlToRight)
Set NextColPaste = LastCol.Offset(, 1)
LastCol.Select
End With
That Code will Select the data in row 3 only and not the whole range of 3:18
I have tried Range (LastColData & "3:18").Select and that selects everything on the whole page from row 18 down.
I have done a lot of searching and for some reason this dynamic selection and pasting of data is escaping me this morning
View 1 Replies
View Related
Jul 29, 2008
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet
Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets
If wSheet.Name wAppend.Name Then
LastRow = wAppend.Cells.Find(What:="*", After:=wAppend.Range("A2"), _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
wSheet.UsedRange.Copy Destination:=wAppend.Cells(LastRow, 1)
End If
Next wSheet
End Sub
This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
View 9 Replies
View Related
Jul 26, 2013
I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies
View Related
Jul 10, 2014
Is it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
View 6 Replies
View Related
Apr 4, 2008
Here is what i'm working with:
http://img90.imageshack.us/my.php?im...uestionas8.jpg
what i want it to do is pull out the stuff in column C and put it in column F. But i don't want it to duplicate it at all. So for instance in this case, submarket 1 would be cary-morrisville-apex / submarket 2: northwest wake / submarket 3: north wake etc.
would this involve a VLOOKUP function but an if then function as well? I'm not really sure how to go about it.
View 14 Replies
View Related
Jun 6, 2014
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
View 6 Replies
View Related
Dec 6, 2013
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
View 6 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Feb 20, 2014
Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet
i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also
SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.
[Code] .....
Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls
View 12 Replies
View Related
Nov 18, 2011
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
View 2 Replies
View Related
May 31, 2006
I have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).
When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.
View 3 Replies
View Related
Apr 1, 2014
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
View 1 Replies
View Related
Aug 26, 2009
while running the macro, how do you populated cell A1 of a different sheet without first seleting sheet the desired sheet. Example im on sheet 1 and iwant to move a value "TEST" to cell A1 of sheet3?
View 2 Replies
View Related
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Jan 11, 2010
I have three columns (9, 10, & 11); text, currency, and text and I am trying to move them from seperate columns on Sheet2 to one column with forward slashes "/" between them on Sheet3. The attached code does this, however I lose the dollar sign and commas.
View 4 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Jun 11, 2009
for some reason my VLOOKUP formula isn't calculating. i want the VLOOKUP to appear in column E of "2ILMaster." I want to pull data from "ILComp" column B. i've tried formatting both columns as number and general, and the formula still doesn't work.
View 2 Replies
View Related
Aug 25, 2009
I'm having a little trouble figuring out what formula to use for situation. I have 5 columns of information.
Column A = School # of current school
Column B = School 1 Name
Column C = School 2 Name
Column D = School 3 Name
Column E = School 4 Name
What I want to do is in Column F to look through a row of information and find the current school.
So:
If A="1", pull from B
If A="2", pull from C
If A="3", pull from D
If A="4", pull from E
I tried doing a VLOOKUP table, but I think I'd have to do one for every row, but I could be wrong. I also thought of INDEX(MATCH), but I couldn't quite figure it out.
View 2 Replies
View Related
Mar 25, 2014
I am trying to copy data from one workbook to another. I have an excel Database (Sheet1) with a macro that prompts the user to select an excel workbook which has the data I'm trying to copy.... I got this part down....From this opened workbook, I want to copy the Range("C2:C12") and paste into my database(Sheet1) workbook.
However, I need a dialog box to pop up for a user input to designate which row the data must be pasted into. The dialog box will search column H in the database (Sheet1) workbook to designate the appropriate Row # in which the data will be pasted.
Now the ranged that I copied earlier will need to be pasted selectively if possible. Range C2:C8 will be pasted from Column HG:HM and C9:C12 will be pasted from HO:HR. Is it possible to selectively paste a range in such a manner or should I just split it up? I'm not really sure the order in which I should do these commands or how to go back & forth from one workbook to another. I would like for the workbook filename to not be a factor.
View 9 Replies
View Related
Nov 28, 2007
I'm in need of a macro that takes data from cells in column A and moves them into different cells. Each block of data includes a company name, contact name, address and usually (but not always) phone, fax, email, website, etc. I want to move each set of contact info into a set of cells that begin in column A, starting with company name. Refer to the attached spreadsheet
View 3 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Mar 25, 2013
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies
View Related
