VBA Code To Renames Tabs Dependent On Cell Name
Mar 27, 2008
Can anyone please help me with some code to rename tabs to match a value in a cell.
When I receive the spreadsheet it is in the standard Sheet1, Sheet2 and so on.
Now in cell E2 there is a Budget Cost code. Now I have to manually rename the tabs to match this code and it is quite time consuming.
Also Sheet1 is different as it has a logo in cell E2 so the budget code on that sheet is in E3 but like I said earlier Sheet2, Sheet3 and so on the budget code is in E2.
Can anyone post a little macro that will rename all the tabs on the worksheet to match the budget code in the above mentioned cells.
View 10 Replies
ADVERTISEMENT
Sep 17, 2007
How do i write a line in a macro that basically says:- If this box say (m1) has data in it follow the next procedure that i have designed (which is copying data from one spreadsheet to another and re-designing it). However if this set box is empty do not copy anymore information over.
View 2 Replies
View Related
Mar 11, 2009
I have several files in one folder. C:/data/
These files are named as date_xxxx.wk1. The date format is YYYYMMDD.
Everyday I need to rename them as date_cellvalueA1.xls where the date format is DDMMYY.
Cellvalue A1 is taken from each of the respective workbook.
As I need to rename them on a daily basis. Can I use 2 field, one to determine the directory path and one to determine what file name to search for.
If the files contain the YYYYMMDD, it will be rename to DDMMYY_cellvalueA1.xls
View 9 Replies
View Related
Mar 20, 2009
I have attached a file where I’ve made some dependent validation lists. When the first box is changes it clears the last 2 with this bit of code
View 2 Replies
View Related
May 16, 2014
See attached file illustrating exactly what I'm trying to do.
I won't repeat the exact same things I wrote in the file, but the Summary is that I need to first make such that only certain check boxes can checked at any one time, then make the command button run certain macro(s) depending on which boxes are checked.
View 8 Replies
View Related
Jun 11, 2014
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
View 2 Replies
View Related
May 27, 2014
I have the code below and it runs a report for me but it puts the new tab to the left of my existing tabs. How can I alter the code to put the new tabs on the right?
If Me.cmbCat.ListIndex > -1 Then
'Add a new worksheet
Set WSReport = Worksheets.Add(before:=Worksheets(1))
With WSReport
'Check sheetname and keep adding 1 until not found.
If SheetExists("Report " & Me.cmbCat) Then
Cnt = 1
Do
[code].....
View 3 Replies
View Related
Jan 10, 2007
I am pulling my hair out in frustration with this right now. I have a .csv file that I am attempting to run a macro on. I will need to move between tabs, and want to rename a tab to remove the date as it is not consistent in format. I have tried numerous ways, and I don't get an error message, but the tab is not renamed either. Code I have tried is below ....
View 9 Replies
View Related
Sep 5, 2013
I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
View 2 Replies
View Related
Oct 19, 2007
I have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
View 9 Replies
View Related
Jan 22, 2010
Situation:
I have two drop down lists 1) Country and 2) States/province
Country has list: [US, Canada]
If "US" is selected, [Arizona ,Florida, NewYork] is listed in the 2nd drop down list
If "Canada" is selected, [Alberta, Ontario, Quebec] is listed in the 2nd drop down list
Scenario:
First, I select "US" and choose the states to "Florida"
Next I change the country to "Canada" and forgot to choose province
Then, the 2nd dropdown list is changed to [Alberta, Ontario, Quebec],
BUT the current value is still "Florida"
Probem:
Now I have "Canada" and "Florida" selected in the sheet
Question:
If the primary list is changed, can I make the 2nd drop down list to show a default value (e.g. blank or the first entry i.e. Alberta)?
View 11 Replies
View Related
Jan 28, 2014
I'm uploading a sample worksheet- on the scenario A tab, there is a pivot table that are pulling from the data range that is between B3:c13. I copied tab A and made tab B. However, on tab B, the pivot table is still pulling from the data range on scenario A even though I need it to be pulling from tab B.
I do not want to use dynamic ranges because the pivot table is being used to make a pivot chart. How do I get it so that on the scenario B tab the pivot table automatically pulls from the right tab?
I have also have a macro/VBA (I don't know what it is considered, I just copied code from somewhere online) that automatically refreshes all pivot tables (there are other pivot tables being used in the spreadsheet). If I did need to use vba/macro to accomplish what I need to do, where would I copy/paste it in the code I currently have (not sure if the button I have in sample will work properly)?
Sub Refresh()
Dim PT As PivotTable
Dim WS As Worksheet
For Each WS In ThisWorkbook.Worksheets
For Each PT In WS.PivotTables
PT.RefreshTable
Next PT
Next WS
End Sub
On tab B, I manually created another pivot table to show what I want the end result to look like. The pivot table between rows 22 and 24 and the corresponding pivot chart between columns E and M (lets call this pivot table/chart #1) is what I'm trying to manipulate. The pivot table between rows 26 and 28 and the corresponding pivot chart between columns o and V is what I want the end result to look like. I made pivot table/chart #2 by just manually setting the data source to be "ScenarioB!$B$3:$C$13.
However what I'm trying to do is get it so that pivot table #1 would automatically refer to ScenarioB!$B$3:$C$13 instead of ScenarioA!$B$3:$C$13. I created the tab "scenario B" but just duplicating the scenario a sheet. Thus, when I duplicate, the pivot table still incorrectly refers to data on the scenario A tab. I want it to pull from the scenario B tab.
The data range between $B$3:$C$13 automatically pulls from another sheet in my real spreadsheet.
View 2 Replies
View Related
Dec 11, 2008
I use a workbook where new worksheet tabs are added and removed daily. Every day I use the second-to-last tab (2nd from the right) and the last tab (far right). What code would enable me to activate and reference both of these tabs individually? I believe it would be something like the code below but I can't figure it out...
View 5 Replies
View Related
Jun 28, 2007
Is there any way to rearrange the order tabs display in through VBA Code?
View 9 Replies
View Related
Apr 14, 2009
I need a macro code to color 31 excel sheet tabs with shade cyan with a click.
View 9 Replies
View Related
Feb 26, 2008
I havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
View 5 Replies
View Related
May 17, 2013
i need a code to hide the sheets tab from the workbook. and only show the horizontal scroll bar and vertical scroll bar.
View 1 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
Jan 26, 2007
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies
View Related
Oct 20, 2013
I'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
View 2 Replies
View Related
Oct 12, 2009
Say in A1 i have either Yes or No, in B1 i have a dropdown validation from a list if A1 is Yes and "n/a" if A1 is no.
I thought if i renamed my list validation to "Yes" and labelled "n/a" as "No", then using =INDIRECT(A1) as my list validation would do the trick.
View 2 Replies
View Related
Jan 28, 2014
In Excel it's possible to create a link dependent of a cell.
Example
='C:UsersAMDesktop[" & C9 & "]Sheet1'!$B$3
where C9=Andrew.xls
View 7 Replies
View Related
Apr 18, 2008
How can I get Excel 2003 to place a specific name (that is not in the spreadsheet) for cells in column A for which the cell value in column B contains a particular word?
View 4 Replies
View Related
Aug 12, 2008
Currently F37 has a vlookup code that gives me text values and what I am looking to do is to color code these values.
For Example if the text value is GOOD, should be colored GREEN, VERY GOOD = YELLOW and OUTSTANDING = RED.
View 9 Replies
View Related
Apr 21, 2009
I am trying to create validation drop down list for a cell, however I want different drop down lists which are depenent upon another cell.
in Cell A1, I want the options "A", "B","C" etc
If cell A1 = "A", then drop down validation for cell A2 = 1,2,3,4,5
cell A1 = "B", then drop down in cell A2 now equal 6,7,8,9, 10
cell A1 = "C", then drop down in Cell A2 now equal 11,12,13,14,15
View 4 Replies
View Related
Nov 29, 2009
I need an email to be sent to the last period teacher when a student earns less than 265 points. Some students go to a different class at the end of the day, so the teacher needs to be notified.
I have an if formula set up to create a yes statement: If(T26<265, "yes", ""). I need for an email to send when U26 is set to yes.
Actually I need an email to be sent anytime any cell in range (U5:U40) is yes, and I need it to be sent to the email address listed in the corresponding v column.
View 10 Replies
View Related
Aug 8, 2006
All to occur in cell G2
Condition 1.
If F2 is > 0 then multiply F2 by D2.
Condition 2 in the same cell.
If the product of F2 multiplied by D2 is > E2 AND the sum of F2 and F1
multiplied by D2 is > 0, then add the product of D2 multiplied by the sum of
F1 and F2 to E2, otherwise input E2
Condition 3 in the same cell.
If the product of F2 multiplied D2 is < E2 BUT the sum of F2 and F1
multiplied by D2 is > 0, then input the product of D2 multiplied by the sum
of F1 and F2.
Condition 4 in the same cell.
If F2 < 0, and the sum of sum of F2 and F1 multiplied by D2 is < 0, then 0.
This is the best way I could think of the write out my intention. I think if
I can get the above scenario into a one cell formula that should resolve my
pain.
View 11 Replies
View Related
Jan 19, 2008
Is there any way to make a cell's contents change automatically according to the present date?
View 9 Replies
View Related
Jun 14, 2007
I'm trying to make a circles size (diameter) change depending on a value inputted in a cell, preferable I would like to have a limit to the sizes too so if that the circle will not have a diameter larger than 20 or smaller than 2 regardless of the values put in. the sheet will have several circles.
I know this must be documented somewhere but I don’t think I’m using the right terminology in my searches,
View 9 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
