Rearrange The Order Tabs Display In Through VBA Code?
Jun 28, 2007Is there any way to rearrange the order tabs display in through VBA Code?
View 9 Replies
ADVERTISEMENT
Rearrange Slices Of Pie Chart In Descending Order Without Sorting Data?
Aug 27, 2013How to rearrange slices of pie chart in descending order without sorting the data?
View 1 Replies View RelatedExcel 2010 :: Macro Or VBA Code To Rearrange Data
Jul 5, 2012I'm using Excel 2010 and XP. I have data in rows 1 -4 that can not be altered. There are headings in Row 5, B-L & Row 6, F-J.
Data starts in Row 7 and follows the headings. This repeats for several thousand rows. I need a way to move Row 6, F-J and put it on Row 5, M-Q
Row 6, F-J and put it on Row 5, M-Q
Row 8, F-J and put it on Row 7, M-Q
Row 10, F-J and put it on Row 9, M-Q
Row 12, F-J and put it on Row 11, M-Q
....
....
....
Then delete blank rows below Row 5
Sorting Multiple Worksheet Tabs In Alphabetical Order
Nov 24, 2008I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.
View 2 Replies View RelatedExcel 2007 :: Sorting Tabs In Alphabetical Order
Feb 7, 2011I have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedOrder Columns & Tabs Based On User Input
Jan 9, 2009How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.
View 5 Replies View RelatedDisplay Graph In Descending Order
May 11, 2007I'm being asked to report on some survey findings containing 60 questions for my company. I've rated all 11 departments from 1st to 11th place for each question.
I want to be able to display a graph showing which departments came first, second and third and also where my department came - in the example of the first question, 7th.
What I'd like is a bar graph (ideally) without any values on the Y axis, the department name along the X axis and text labels at the top of each bar showing the position (ie. 1st, 2nd, 3rd and 7th).
The problem is that if I produce a graph from the following table:
Dept 1 - 1
Dept 2 - 2
Dept 3 - 3
My dept - 7
..then it produces a bar graph with bars in the opposite direction; ie the best department having the smallest bar.
I could just reverse the figures with 11 being the best instead of 1, but then the text labels on top of each bar are wrong. I know I could just label the correct figures by hand with text boxes, but I have 60 of these things to produce!
The closest I came was using the reverse values and having a custom text format to replace the numbers with the opposite text values ie. 11="1st";10="2nd"; but I couldn't get that to work
Any ideas? ....
Display Chart Bar Graphs In Order Different Than Data Is Sorted?
Feb 22, 2014I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
[URL]
Display Cursor Follow Order Of Filling Out In Userform?
May 24, 2012How to display the cursor follow the order of filling out in userform?
View 9 Replies View RelatedDisplay Chart Graph Bars In Order Different Than Data Is Sorted?
Feb 21, 2014I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
VBA Code To Have Tabs Insert On The Right
May 27, 2014I have the code below and it runs a report for me but it puts the new tab to the left of my existing tabs. How can I alter the code to put the new tabs on the right?
If Me.cmbCat.ListIndex > -1 Then
'Add a new worksheet
Set WSReport = Worksheets.Add(before:=Worksheets(1))
With WSReport
'Check sheetname and keep adding 1 until not found.
If SheetExists("Report " & Me.cmbCat) Then
Cnt = 1
Do
[code].....
Rename Tabs With Code
Jan 10, 2007I am pulling my hair out in frustration with this right now. I have a .csv file that I am attempting to run a macro on. I will need to move between tabs, and want to rename a tab to remove the date as it is not consistent in format. I have tried numerous ways, and I don't get an error message, but the tab is not renamed either. Code I have tried is below ....
View 9 Replies View RelatedOrder Into Quintiles Macro Code
May 4, 2008I would like to know if ther is any quintile function or something like that. Is just that i need to order some imformation in quintile in visual basic.
View 3 Replies View RelatedVBA Code To Create New Tabs In A Worksheet?
Sep 5, 2013I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
Code To Select All Tabs In A Workbook
Oct 19, 2007I have been recording different sets of commands then copying/pasteing them together to complete what I want. I have tried to clean it up as best I can but im sure it does things it does not need to. Is there a way to tell it to select all sheets in "Book2.xls" then remove the formatting (font color,comments,shading) rather than using the Array and naming each and every sheet?
What this will end up doing is openeing about 12 files, copying specific tabs from each of those files and pasteing them all to the same workbook (in this example it would be Book2). Then removing the formatting.
Workbooks.Open Filename:="F:123Book2.xls"
Windows("Book1.xls").Activate
Cells.Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Copy Before:=Workbooks("Book2.xls").Sheets(1)
Sheets(Array("Sheet1", "Sheet2", "Sheet3")).Select
Cells.Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.ClearComments
VBA Code For Changing Pivot Datasource On All Tabs
Jan 28, 2014I'm uploading a sample worksheet- on the scenario A tab, there is a pivot table that are pulling from the data range that is between B3:c13. I copied tab A and made tab B. However, on tab B, the pivot table is still pulling from the data range on scenario A even though I need it to be pulling from tab B.
I do not want to use dynamic ranges because the pivot table is being used to make a pivot chart. How do I get it so that on the scenario B tab the pivot table automatically pulls from the right tab?
I have also have a macro/VBA (I don't know what it is considered, I just copied code from somewhere online) that automatically refreshes all pivot tables (there are other pivot tables being used in the spreadsheet). If I did need to use vba/macro to accomplish what I need to do, where would I copy/paste it in the code I currently have (not sure if the button I have in sample will work properly)?
Sub Refresh()
Dim PT As PivotTable
Dim WS As Worksheet
For Each WS In ThisWorkbook.Worksheets
For Each PT In WS.PivotTables
PT.RefreshTable
Next PT
Next WS
End Sub
On tab B, I manually created another pivot table to show what I want the end result to look like. The pivot table between rows 22 and 24 and the corresponding pivot chart between columns E and M (lets call this pivot table/chart #1) is what I'm trying to manipulate. The pivot table between rows 26 and 28 and the corresponding pivot chart between columns o and V is what I want the end result to look like. I made pivot table/chart #2 by just manually setting the data source to be "ScenarioB!$B$3:$C$13.
However what I'm trying to do is get it so that pivot table #1 would automatically refer to ScenarioB!$B$3:$C$13 instead of ScenarioA!$B$3:$C$13. I created the tab "scenario B" but just duplicating the scenario a sheet. Thus, when I duplicate, the pivot table still incorrectly refers to data on the scenario A tab. I want it to pull from the scenario B tab.
The data range between $B$3:$C$13 automatically pulls from another sheet in my real spreadsheet.
VBA Code To Renames Tabs Dependent On Cell Name
Mar 27, 2008Can anyone please help me with some code to rename tabs to match a value in a cell.
When I receive the spreadsheet it is in the standard Sheet1, Sheet2 and so on.
Now in cell E2 there is a Budget Cost code. Now I have to manually rename the tabs to match this code and it is quite time consuming.
Also Sheet1 is different as it has a logo in cell E2 so the budget code on that sheet is in E3 but like I said earlier Sheet2, Sheet3 and so on the budget code is in E2.
Can anyone post a little macro that will rename all the tabs on the worksheet to match the budget code in the above mentioned cells.
VBA Code To Activate Second-to-last And Last Worksheet Tabs In A Workbook?
Dec 11, 2008I use a workbook where new worksheet tabs are added and removed daily. Every day I use the second-to-last tab (2nd from the right) and the last tab (far right). What code would enable me to activate and reference both of these tabs individually? I believe it would be something like the code below but I can't figure it out...
View 5 Replies View RelatedCode To Color Excel Sheet Tabs
Apr 14, 2009I need a macro code to color 31 excel sheet tabs with shade cyan with a click.
View 9 Replies View RelatedApply Macro Code To All Tabs / Sheets
Feb 26, 2008I havae the following macro which i recorded in Excel. I want this Macro to run after another macro that groups data and creats tabs. The following macro will then add a column and run an array formula. I think this can be done in a loop but i'm not sure how to do it. This is working but takes a long time and times out by the time it reaches the last tab.
Application.Run "TotalHrs"
Columns("I:I").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("I4").Select
ActiveCell.FormulaR1C1 = "Invoiced Amount"
Range("I5").Select
Columns("I:I").EntireColumn.AutoFit
Selection.FormulaArray = _
"=INDEX(VLookup!R2C2:R242C4,MATCH(RC[-3]&RC[-2],R5C6:R2500C6&R5C7:R2500C7,0),3)*R[3]C[-1]"
Selection.Copy
Range("I6:I1000").Select...................
Code To Insert Rows In Next Sheet In Order Of Column B?
Apr 24, 2014The below code used to work for me perfectly but in the last couple days it's been acting up. The code is supposed to cut out 2 rows from sheet1 and insert it in order of column B in sheet2. Up until a few days ago the code was inserting the 2, cut, rows properly but now it inserts it at the top of the sheet.
Here is the workbook I'm working with TEST.xlsm
Fix Sheet Order So Code References Correct Sheets
Sep 14, 2007I would like to know whether its possible to fix a sheet to always be the second sheet in a work book no matter how many other sheets are added. Currently I have set up macros to add subsequent sheets before the last sheet, so that Sheets("Number 2") remain sheets(2). Is there some way I can lock the first two sheets so that when I reference them in my code as sheets(1) and sheets(2) it will reference the right sheets. Right now I have it set up so that Sheets("Number 2") can be renamed by the user, and data inputted on this sheet, but I require that the user not be able to move this sheet and the sheet preceding it.
View 5 Replies View RelatedVBA Code To Hide Sheet Tabs In Active Workbook
May 17, 2013i need a code to hide the sheets tab from the workbook. and only show the horizontal scroll bar and vertical scroll bar.
View 1 Replies View RelatedUser Form: Which Format The Code In Order To Get Information To Appear In A Spreadsheet
Oct 24, 2007I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet
http://www.srfl.ca/userform.htm
Change Order For Chart Series Collection Macro Code
Mar 18, 2008I have a bar graph with 2 series of data. Anyone knows how I can specify the order in which they appear? code looks similar to the following. The bar graph shows the second series before the first series. How do I reverse the order?
With cht
.ChartType = xlColumnClustered
' first data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
' second data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
Display All VBA Code In Code Window (VBE)
Sep 4, 2006When I started using VBA, all the code for each module was shown in the code window. This was a bit cumbersome when looking for one sub in particular. Now when I load VBA, all the Subs and Functions have their own page, and can be selected from the right hand drop down list. This is much easier for entering code, and finding subs. However, it is sometimes useful to see 'the big picture', so how do I swap between the two types of display?
View 2 Replies View RelatedOrder Of Executed Code - Synching Sounds With Making Shapes Visible
Jul 8, 2014I was working on a presentation for work where I wanted to build a 'Family Feud' type board to play a game. In the board I am using activex text boxes with code that would hide the text box to reveal the answer underneath or it would show a custom shape (an X in a box) and play the buzzer sound. The code is pretty simple, first I would make the shape visible, then I would play the sound then the shape would be made invisible. If I step through the macro everything works fine, but when I run the macro, you never see the shape. It's almost as if the sound plays before the shape shows up and then it is made invisible again. I tried putting a wait and a sleep command between making the shape visible and playing the sound but that made no difference. If I remove the code to hide the shape at the end and run the macro, the sound plays and then the shape appears. Is there anyway to have the shape appear prior to or at the same time as the sound plays?
Code:
Private Sub CommandButton8_Click()
Application.ScreenUpdating = True
ActiveSheet.Shapes("First Strike").Visible = True
Play_Strike_Sound
'The previous line refers to another macro that has the code commented below. The sndPlaySound32
'function is one I picked up from cpearson.com
'sndPlaySound32 "C:\_Fin SysSoundsff-strike.wav", SND_SYNC
ActiveSheet.Shapes("First Strike").Visible = False
End Sub
VBA Code To Display A Msg Box If The Returned Value Is #N/D
Jan 13, 2010I have a sheet where I put a code from a product in Column B, and the name of the product will appear in Column C, with a VLOOKUP Formula. What I would like to do is, get a VBA code to display a msg box, if somebody enter a the wrong code. If that happen a #N/D will appear in Column C.
In this Sheet I already have the bellow VBA Code, to avoid repeated product codes:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range, Dn As Range
If Target.Count 1 Then Exit Sub
Set Rng = Range(Range("B1"), Range("A" & Rows.Count).End(xlUp))
If Application.CountIf(Rng, Target) > 1 Then
MsgBox "O valor introduzido " & "(" & Target & ")" & " é duplicado. O Menino está a Dormir???"
End If
End Sub
Macro To Set The Order In Which Worksheets Should Be Printed (order Is Changing Daily)
Nov 29, 2008I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
Excel 2007 :: Change Colour Of Tabs To Match Other Tabs In Workbook
Sep 22, 2012I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!