Code: =VLOOKUP((LEFT(C4,6)),'Data from 7500'!$B$16:$G$195,6,TRUE)
And it works great, except that the data returned is off by one row. For example, the correct value for the sample name in B107 is located in G107, but the formula returns the value in cell G106. I've tried changing the TRUE to FALSE and that returns #N/A.
I have a three or four letter abbreviation of a last name in A1. Column C contains a list of Last Names; column D contains a list of corresponding First Names; and column E contains a formula concantenating the First Names and Last Names from columns C & D.
I have the following formula in B1:
=VLOOKUP(A1,C1:E44,3,1)
I am attempting to match up the three or four letter abbreviation with the concatenated list to return the full name (First and Last) in cell B1, however, I'm not getting the desire result. I keep getting the name in the row just above the name I want.
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a two different formulas the return a numbered result(PO Number) in the same column. I then vlookup both of them with the same formula into a pivot table, one returns the result one doesn't. format appears to be the same.
View 6 Replies View RelatedI have created a table in excel, and it has a very simple sum totals. When i include all cells in the table the total becomes 0. When I exclude a cell in the table, the total shows. I have deleted the row and re inserted another one and copied the cell content from above that was not having a problem,
View 9 Replies View RelatedI am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.
{=MAX(IF(Payments!G:G=B4,IF(Payments!O:O=C4,Payments!N:N)))}
In the attached file I used =MATCH(TRUE,INDEX($B$2:$B$10="",0)) to retrieve the location of the first empty cell.
When using the "Evaluate Formula" tool, it is clear that the position in the array created by the INDEX function is the 6th. Nevertheless, the final outcome is 9, being the last cell in range.
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I have this COUNTIFS expression buried in a larger formula:
COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1")
and it always returns a value of zero or some positive integer.
I'm now looking for a little "function" that I can wrap around this expression that will:
A) indicate any non-zero result as 1 or TRUE
and
B) indicate any zero result as 0 or FALSE
Something like...
AREYOUNONZERO( (COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1") )
I'm sure there's a fairly efficient way to do this... but I'm totally stumped at the moment!
I have a simple formula subtracting one cell from another using =SUM(XX,-XX). When I click on fx and bring up the function arguments box, the formula result is displayed correctly in that box. However, the cell containing the formula will only display a zero. I have tried reformatting the cells to no avail. I have also tried getting a result using =XX-XX and that does not work either.
View 10 Replies View RelatedI have discovered a strange thing about excel and it is driving me mad and ruining my project.
Basically, If i enter the number 97.4 into cell A1 and then 97.165 into cell B1 and then enter the formula =A1-B1 into cell C1 i get the answer 0.235. Which is correct.
However, when you increase the number of decimal places to 30 the answer that is returned is 0.234999999999999000000000000000.
This calculation result seem to fluctuate wildly depending on the primary numbers in cells a1 and b1. Very rarely have i seen the full 30 decimal places without a bizarre result like this.
Maybe it has been too many years since i was at school and that i am confused with my numbers and that there is a real easy answer to why this result is returned.
As i said it is ruining my project that i am working on. Can anyone help? Why does excel do this? Is there a way to stop this happening? My project relies on this answer to be correct. Is there a way to force excel to stop doing this?
This formula tells me the highest number: =LARGE((G36,O36,W36,AE36),1)
The result is AE36. The answer is correct. I get the highest number. I want the formula now shows Y3 instead of AE36.
In my situation Y3 is the name of 1 of my tables. In my case I get from this table, the highest number.
These are 6 cells to the left side. These are 33 cells to the upper part. In the future I will work with more tables. So the answer must always move
I've been busy this few days to investigate. That is why I know it works with offset. Anyway, I still do not know how it goes.
I'm compiling a list of names on a separate tab from a column that only lists the names sporadically. Problem: In the formula, the IF provides a TRUE, the row function, and consequently, the INDEX function (when I hit F9) provides the correct "name" and row number, but when I hit return, it provides the text 4 cells beneath what it should.
=IF(ROWS(F$5:F5)
I need a formula to count cells based on the date, so that I can have a blank cell when the answer is 0. I am adding values cumulative and future cells need to be blank because I have a graph that has a trend line and I don't want the trend line to fall off at the end. I also don't want to have to go back to this every month and update it.
Column A
Date
1/2/2007 0:00
1/3/2007 0:00
1/10/2007 0:00
2/10/2007 0:00
2/10/2007 0:00
2/15/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
3/22/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
4/31/2007 0:00
Column B
Invoice #
CM-0003881
CM-0003882
CM-0003883
CM-0003888
CM-0003928
CM-0003932
CM-0003933
CM-0003985
CM-0004007
CM-0004008
CM-0004009
CM-0004065
I have this formula in cell F3 that will add the dates through the end of January:
=SUMPRODUCT((A1:A1000>=DATEVALUE("1/1/2007"))*(A1:A1000
I have 2 tables, 1 beneath the other - table 1 columns represent date ranges and their values. Columns and their data are alternating color coding. Table 2 references, by means of array formula, this data - IS it possible to include the font color as a result?
BCDEFGH503/0310/0317/0324/03609/0316/0323/0330/03712348Prod113,91113,69713,58213,4849Prod21,9241,8943,1151,86510Prod31,2601,2401,2301,22121Age (Days)22Prod1211391123Prod22624Prod326
Formula in H22 = '{=SUMPRODUCT(((H$5-$D22)>=$E$5:$O$5)*((H$5-$D22)
I am looking up a risk matrix to return the risk rating... it is very simple, it works on one sheet, but on a different sheet (looking up different data, but same basic format) it returns exactly the opposite rating.
My formula is: =INDEX($G$6:$K$10,MATCH(I19,$G$5:$K$5,0),MATCH(J19,$F$6:$F$10,0))
Here is F4 to K10
I have data validation on I19 and J19 based on the cells below
Consequence
Priority
Very Low
Low
Medium
High
Very High
[Code] ..........
BUT... when I put Very Low and Very Low in the two cells (I19 and K19) I get Very High as the return.
I am using the formula =VLOOKUP(F4,Scoring!$B$3:$C$66,2,FALSE) in column 'G' to return values from another sheet, 'Scoring', if column 'F' has a name in it the value is returned. The problem is if column 'F' is blank the formula returns ### and I cannot SUM column 'G'.
View 6 Replies View RelatedI have a vlookup formula for a table (attached), where for some reason, I cannot get rid of the #N/A value that is returned. I am referencing on the first sheet the 'No." column, and in checking for that number in the second column, am wanting to put the value in the 'moldules' column. I have tried converting the reference cells to text, numbers, have done =LEN to look at character counts, etc etc. I have also tried to build a simple dummy vlookup on a different set of data. The file is in Excel 07.
View 4 Replies View RelatedI want the A column to find it's match in the G column and place the corresponding number from the H column in the the B column. See attachment. formula is so basic: =VLOOKUP($A2,G1:H8806,2)
View 2 Replies View RelatedI have a problem with a spreadsheet that has three tabs. In Sheet1 is the first set of values and in Sheet2 is the second set of values. My boss wants me to make a third tab which pulls items from both sheets. He wants is so that any items from Sheet2 that AREN'T on Sheet1 are listed in the 3rd sheet. If they ARE listed on Sheet1, it returns a blank space. I can get it to return a blank space but every other value it pulls (In other words, values that are not on both sheets) returns a N/A instead of the value itself. Attached is the spreadsheet with just the values. Here is the formula I use in the 3rd tab to pull the info:
=IF(VLOOKUP(Sheet2!$A3,Sheet1!$A$1:$A$1044,1,FALSE),"",Sheet2!$A3). Do I just use regular lookup or MATCH instead of VLOOKUP.
Using the following formula, =VLOOKUP(A232,'[HEALTHLINK SPIFF 4-27-06.xls]Rep Total'!$A$2:$D$279,4,FALSE). returns #N/A in some cases - I would like it to return the value of Zero since I need to total the results column
View 5 Replies View RelatedI am attempting to use Vlookup to reference data in another file. if I use the vlookup function it works just fine UNTIL i add data to the referenced file. Then the vlookup never finds the new data. example in the file "TOLA" which references the file "INVENTORY MASTER":
Formula entry:
=IF($B25="","",VLOOKUP($B25,'[INVENTORY MASTER.xls]INVENTORY'!$A$4:$L$3356,3))
Now, if the data 031110 is entered in B25 of the current sheet, and 031110 is in the A column of sheet INVENTORY MASTER.xls, the proper data appears. (Data from a couple of columns to the right as expected)
Now then, I have closed both INVENTORY MASTER and NOLA. Now I reopen INVENTORY MASTER and make additions to the sheet, save it and close it. Lets say I added items up to 03318, and there is valid data in the columns to the right (B through J). I save and close INVENTORY MASTER....
I have a simple VLOOKUP that I can't manage to give the right answer. The contditions must be 'FALSE' as the the stock report database has so many similar numbers in it.
View 2 Replies View RelatedIs it possible to make VLOOKUP look to the left?
Imagine following arrangement of data:
Address Name PIN
A-street Abe 4587
B-street Bob 8214
V-street Val 9657
I want to know the name of the person who has PIN 4587. Is it possible to do this without rearranging the columns?
I ahve got the below range.what I want is if the first chracter starts with any of the below corresponnding value to be shown.I am using left and abs for this . but when the chracter stars with "N" or "E" . i am getting and error.
6Connect
NExplore
1Entry
3Connect
2Entry
5Live
EAchieve
7Live
8Live
9 connect
trying to return a value left of a column instead of from the right.
ex
A B C D
1103013v2200172b
I want to lookup a value in column C and return the value from column A
What I need is to find a max value within a range and then tell me what the row value in Column A is. Usually use VLOOKUP for this but this doesn't like minus numbers.
I think it has something to do with Match and Offset but can't get it to work properly.
I have attached an example, where the max of the total is 4,435 and belongs to Steve but how do I get this to do using formulas
How to make vlookup work right? I have tried it once and it worked but I can't get it ot work again.
I changed the format to text for the data I using and the data I looking in to see if that would fix the ref# or N/a error.
Is the formatting one possible issue?
I am slow to vlookup but I used the formula as
1. the lookup value is the serial #
2. the table_array is the entire worksheet that I am searching in - or should I just use the column that hold the values I am looking for?
3. the column_index_num is ??
4. [range_lookup] is FALSE.
I use a lot of VLOOKUP formulae in the sheets i put together and, despite both the lookup value and table array being in the same format (usually text format), i often get an #N/A being returned.
Here's the fun part... if i then do something simple like access the lookup value cell (either by double clicking or pressing F2) and then hit return, then the vlookup calculation suddenly returns the correct value.
I'm convinced it's something to do with the way the cells are formatted but can't work out what.