I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
Code: =VLOOKUP((LEFT(C4,6)),'Data from 7500'!$B$16:$G$195,6,TRUE)
And it works great, except that the data returned is off by one row. For example, the correct value for the sample name in B107 is located in G107, but the formula returns the value in cell G106. I've tried changing the TRUE to FALSE and that returns #N/A.
A B C D E F
Latest Status
Latest Date
Current Status 1
Current Date 1
Current Status 2
Current Date 2
#VALUE!
Sun,16-Feb-14,11:0 PM
Take1
Sun,16-Feb- 14,10:41PM
Take2
Sun,16-Feb- 14,11:02 PM
My formula =IF(B3="","",OFFSET(A3,MATCH(B3,B3:F3,0),0,2)) in A2 is giving me #value error.
The correct solution should be Take2, while matching the condition from B2 latest date.
Sheet Attached. File Name-Latest.xls Zippyshare.com - Latest.xls
I am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.
{=MAX(IF(Payments!G:G=B4,IF(Payments!O:O=C4,Payments!N:N)))}
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
This formula tells me the highest number: =LARGE((G36,O36,W36,AE36),1)
The result is AE36. The answer is correct. I get the highest number. I want the formula now shows Y3 instead of AE36.
In my situation Y3 is the name of 1 of my tables. In my case I get from this table, the highest number.
These are 6 cells to the left side. These are 33 cells to the upper part. In the future I will work with more tables. So the answer must always move
I've been busy this few days to investigate. That is why I know it works with offset. Anyway, I still do not know how it goes.
On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.
View 2 Replies View RelatedRead about the Dfunctions and SUMIFS/COUNTIFS not working between linked objects and think my error is the same.
SYMPTOMS: Formulas wont work unless linked workbooks are open. Once open they work and as soon as the sheet is altered after they are closed, they links break.
My formula =OFFSET(('Linked Workbook'!$A$1),0,VLOOKUP(Range,RangeData,2,0)-1) or go to workbook and bring back a certain amount of cells to the right of A$1$ based on a lookup formula in the Main open workbook.
Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
how to return a blank or null value when the vlookup formula would normally return a #N/A? I am using the False range_lookup argument to get an exact match.
View 2 Replies View RelatedMy VLOOKUP formula is displaying in the cell instead of the result. The formula is VLOOKUP(A1, income_codes, 2, FALSE) and in the formula editor the result (00017) is calculated correctly.
However the cell displays =VLOOKUP(A1, income_codes, 2, FALSE) instead of the answer 00017.
My view options are not set to display formulas. The codes are formatted as text in the range income_codes as they start with zeros.
what I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
In the attached spreadsheet you will see the table of data in cells e6:L16. In cell N6 i am doing a hlookup to find the date in the table of data that is closest to the date in cell A4. The formula in cell M6 is where i am having the problem and i was trying to pull in data that is 4 columns to the left of where the hlookup date is in cell N6. The problem i am having is when i input any date higher than 06/30/07 the Index formula does not display the correct date. What is confusing me is that the Hlookup formula in cell N6 still works with higher dates but the index formula does not.
View 6 Replies View RelatedI have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
i have a range of cells which is nxn where n>1. i want to place a header 2 rows above this range which is aligned on the left. this is what i tried:
View 3 Replies View RelatedI have a table that is 10 columns wide. On a separate worksheet I want to display the last 10 rows of the table - 100 cells in all.
Getting the value of one of the cells is easy enough - I used:
=OFFSET(DataTableFirstCell,COUNTA(Sheet2!$A:$A)-1,0)
If I copy/paste, or drag the fill handle to expand the target range I end up with the same formula and same value in all 100 target cells. I know I can edit each cell to modify the offset -1,-1, then -1,-2 then -1,-3 etc but that's mind-numbingly tedious and likely to introduce error.
There must be a way to have a cell reference another, then copy the formula to adjacent cells and and have the result show the content of cells adjacent to the original source.
I've been trying INDIRECT and INDEX with ROW and COLUMN - but I can't work it out.
i'm trying to return a value thats offset but the position of the value may change each time data is imported. i've attached sheet displaying problem, as i can't explain clearly. i need to lookup the value in column A (yellow), then find and return the total percentage value in column C (blue). its always 2 columns across but the problem is it could be anything from 2 to 5 rows down.
View 6 Replies View RelatedI am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I need a cell formula that will (a) identify the highest N values in an above specified column range, (b) color the interior of those N cells (I suspect that this is not possible), and most importantly (c) return the average value of N corresponding cells, where the corresponding cells are located on the same rows as the identified N high value cells but in a specified column to the left (not necessarily adjacent)
Does anybody know what this formula would look like?
Example:
-----------------------
...| A | B | C | D | E | F |
-------------------------
1 |....| * |.........| 7 |...
-------------------------
2 |....................| 2 |...
-------------------------
3 |....| * |.........| 6 |...
-------------------------
4 |....................| 1 |...
-------------------------
5 |....| * |.........| 5 |...
-------------------------
6 |....................| ? |...
-------------------------
? = average of B1,B3,B5 where (N = 3) and (specified column to the left = B)
Is there a function that gives the result of a formula is it was entered in another cell?
For example, if I have named an INDEX/MATCH function, is there a way to get the result of that function if it were entered in an adjacent cell?
I am having some issues with my conditional formatting code. I need 5 condtions, so I cannot use the built in Cond. Format. Column E is the average of cells F,G,H and when I update the numbers in F/G/H the background color is changed to the appropriate color, but column E does not change color!!! Example: The average (E) will start as a 90 and have a red background, then when the inputs(F/G/H) are changed and the average(E) now equals 30 but it is still shaded red! Is there anyway to have every cell updated, to make the cell change from Red to Green automatically??? Below is a copy of my code.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim CellVal As Integer
If Target.Cells.Count > 1 Then Exit Sub
CellVal = Target
Set WatchRange = Range("E6:H15")
If Not Intersect(Target, WatchRange) Is Nothing Then
Select Case CellVal
Case Empty
Target.Interior.ColorIndex = xlColorIndexNone
Case 0 To 19
Target.Interior.ColorIndex = 8
Case 20 To 39 ..........................
Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).
In this case the result I'm looking for is on row 2:
Is this possible to calculate in 1 cell only (h1)?
A
B
C
D
E
F
G
H
1
44.2
48.6
47.5
0.0
42.3
44.6
49.5
??
2
2.6
1.5
3.5
7.6
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
I have a simple VLOOKUP that I can't manage to give the right answer. The contditions must be 'FALSE' as the the stock report database has so many similar numbers in it.
View 2 Replies View RelatedIs it possible to make VLOOKUP look to the left?
Imagine following arrangement of data:
Address Name PIN
A-street Abe 4587
B-street Bob 8214
V-street Val 9657
I want to know the name of the person who has PIN 4587. Is it possible to do this without rearranging the columns?
I ahve got the below range.what I want is if the first chracter starts with any of the below corresponnding value to be shown.I am using left and abs for this . but when the chracter stars with "N" or "E" . i am getting and error.
6Connect
NExplore
1Entry
3Connect
2Entry
5Live
EAchieve
7Live
8Live
9 connect
trying to return a value left of a column instead of from the right.
ex
A B C D
1103013v2200172b
I want to lookup a value in column C and return the value from column A
What I need is to find a max value within a range and then tell me what the row value in Column A is. Usually use VLOOKUP for this but this doesn't like minus numbers.
I think it has something to do with Match and Offset but can't get it to work properly.
I have attached an example, where the max of the total is 4,435 and belongs to Steve but how do I get this to do using formulas
generally vlookup function gives a value from the right side cell. is it is possible to display a cell from the left side. in the attached excel file i want the numbers against the cell which contains mom.....
View 2 Replies View RelatedFunction sequence giving me "N/A": =VLOOKUP(LEFT(C6,5),H:I,2,FALSE)
Basically, I have numbers that each start with a unique sequence. The first 5 numbers of that sequence represent a certain cell carrier.
What I want to do is have the function look up the first 5 characters of a cell and depending on the 5 characters, I want it to return a certain value.
My idea with the vlookup was to have the lookup value be the first 5 digits and then in my table, it would take only those 5 digits and return a value I have specified in the second column.
