I am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.
{=MAX(IF(Payments!G:G=B4,IF(Payments!O:O=C4,Payments!N:N)))}
This formula tells me the highest number: =LARGE((G36,O36,W36,AE36),1)
The result is AE36. The answer is correct. I get the highest number. I want the formula now shows Y3 instead of AE36.
In my situation Y3 is the name of 1 of my tables. In my case I get from this table, the highest number.
These are 6 cells to the left side. These are 33 cells to the upper part. In the future I will work with more tables. So the answer must always move
I've been busy this few days to investigate. That is why I know it works with offset. Anyway, I still do not know how it goes.
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2)
A2: ????
I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.
If I do this it gets close:
A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.
So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.
Sub startup
Dim numwords As Integer
numwords = WorksheetFunction. CountA("H5:H64")
Range("H1").Select
Selection.FormulaR1C1 = numwords
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
Excel 2003.
I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.
(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro
Can it be password protected somehow?
I entered a simple formula in a cell =B14*B16 but it won't calculate. The cell only displays the formula and not the result. tell me what I did wrong. I've attached a sample.
View 2 Replies View RelatedI have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))
Is there an issue with the formula or some setting in excel?
I've tried a search on this, but have not had any luck. On my spreadsheet, Column B contains text split by a forward slash:
I.e.
123/4567
I am trying to write a formula in column L to display the information on the left of the "/" as well as a formula in column M to display the information on the right of the "/". Normally I would just use the Right/Left worksheet functions, however the number could vary from 2-5 digits on each side of the slash.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
Code: =VLOOKUP((LEFT(C4,6)),'Data from 7500'!$B$16:$G$195,6,TRUE)
And it works great, except that the data returned is off by one row. For example, the correct value for the sample name in B107 is located in G107, but the formula returns the value in cell G106. I've tried changing the TRUE to FALSE and that returns #N/A.
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
how to plot Multiple left Y axis display in Multiple draw line graph. Already I have created Right Y axis. I want to draw 4 Line graph in one graph 3 are Left Y axis and one is Right y axis.
View 1 Replies View RelatedThe default sheets are at the bottom. I would like to move the bottom horizontal sheets to left side vertically.
How to display all sheets name at the left vertically permanently?
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I've got results in row 3 - 16 386 and sometimes these results are exactly the same in some rows. What I now would need is row AB to display only one of each result and row AH to display how many percentages of the time this particular result appears.
View 14 Replies View RelatedI have a count for each site for certain cloumn headers.
But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.
eg:
a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites)
sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)
I want to sum a column and then display the result but in the same cell put some text:-.....
View 4 Replies View RelatedI created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedI have 4 columns in a worksheet.
A B C D
number type date name
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB:
'SEARCH CODE
Dim myItem As String, myRNG As Range, NewLoc As String
Dim Found As Range [code].....
I have a formula on cell A1, if the result of this: =SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)) is equal to 1, I want the cell to display the word OK.
I have tryed this but it didn't work:
=IF((SUM(COUNTIF(F:F;M40);COUNTIF(M:M;M40)))=1;"ok";"error")
I have 15*2,14*2,14.5 in cell A1 and would like this to be computed and its result (i.e 72.5) displayed in cell A2. See below for clearer picture:
A1 A2
15*2,14*2,14.5 72.5
i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
I am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim StartDate As Date
Dim EndDate As Date
If IsDate(Me.txtStartDate.Value) Then
StartDate = Me.txtStartDate.Value
Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy")
Else: MsgBox "Please enter a date"
End If.............
I want to make a formula based on 2 times ex: 10:07:00 and 10:09:00. This formula should display "intime" if the diference between both is under 20 minutes, "outime" if the diference is above 20 minutes and it should display "error" if the time is under 0 minutes (this will only happen when someone makes a mistake typing in the time. For example 10:37:00 and 10:36:00)
View 3 Replies View RelatedI have a pivot table and perhaps that isnt the best way to do this. (Sample attached). Ultimately I need to display two columns only:
Application (ColA) Business (ColC)
There are three columns of data.
Applications (ColA) Usage(ColB) Business (ColC)
There are multiple instances of the same application in ColA, ColB has usage =true or blank and ColC has multiple instances of the same business.
Based on the count of Application in ColA, and the count of Usage =True, I need to return the Business with the MAX count.
Note: the usage cannot be a filter, it must be a count.
I Want to fetch a data as below.
ITEM RESULT
M&C_ES_F_55+_Phase1 <55>
M&C_BR_F_18-34_Phase1 <18-34>
M&C_ES_F_35-54_Phase1 <35-54>
Likewise there are many line items, wherein i want the Age should be searched in ITEM column and should be displayed in the RESULT column.
* I don't want to Use text to column method, is it possible to use IF condition along with Search formula.
