VLOOKUP Return #N/A...?
Oct 29, 2008Rather than explain, it's best to look at my simple example attached. Why am I getting #N/A in cell E6 when I want it to return "one"?
View 3 Replies
ADVERTISEMENT
OR Vlookup; Return The Name Of
Nov 26, 2008In C1 I have =OR(B10="MOODY",B10="AIB")
PROBLEM:
B10 (see below) is a Vlookup and it is preventing C1 to return the name of
the agency: AIB or MOODY - Instead I get TRUE or FALSE, No use to me.
Hours Agency
70.00 AIB
80.00 MOODY
40.00
40.00
40.00
40.00
40.00
40.00
70.00 AIB (B10)
Vlookup Return Value From A Different Row
Feb 2, 2010I'm trying to use the VLOOKUP function to return value from a row below.
I have a large list of numbers (sheet Data) for the entire year with 8 different items per week, and I need to create a list for each week with group of 8 unique items as shown on "Week 21" sheet (I did it manually by copy and paste, highlights are just for the example, don't need to be at the original file). After the first 8th rows, it should start over until it gets to the last value on sheet "Week 21".
Basically, Column B on sheet "Week 21" should be statics, and once I change value on column A it should return values as in the example automatically.
VLOOKUP Return First Value Only
Mar 21, 2014For some reason when i run a vlookup, it is only returning the first lookup value for the whole column. Not sure why this is happening.
See attached example. vlookuperror.xlsx
Vlookup Return 0 When #N/A
Mar 19, 2009I have a spreadsheet with 2 tabs.
Tab #1 is a complete list of ALL possible pipelines
Tab #2 is a partial list that will ONLY have a pipeline listed if there was activity for the month
I need a Vlookup on Tab#1 that looks up the activity from Tab#2.
However, when a pipeline is NOT populated on Tab #2, I'm getting "#N/A" on Tab#1.
Instead of seeing #N/A - I need it to say "0" so that I can sum the column total.
I tried to look at Error Types...and found that the error type for #N/A is 7, however - I can't figure out how to make the formula work.
Return Cell Above VLookup
Nov 17, 2012I am trying to use vlookup to locate a cell in another work book. The identifier is in the same workbook as the vlookup formula however the table and column to look within is in another. The identifier will also show up in the other work book where the table resides.
View 4 Replies View RelatedHow To Make Vlookup Return 0
Jun 8, 2014I have this formula "=VLOOKUP(B5,$F$254:$G$258,2,FALSE)" I want it to return a "0" when cell B5 is not populated. How could I do that? Right now it returns "#N/A" and messes up my math down the sheet..
View 3 Replies View RelatedHow To Get Vlookup To Return The 3rd / 4th / 5th Ect Result
Dec 9, 2013Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
View 2 Replies View RelatedVLOOKUP: Range & Return
Jan 10, 2007Q1: In the range for the lookup I'm performing, the column with the possible match is the 2nd column. I've tested my function with this range, but it fails (range is $A$x:$K$x, with possible matches residing in column B). If I change the range so the 1st column has the desired data ($B$x:$K$x), it works. Can I modify the function to search using the 2nd column so I don't have to rearrange the columns in my worksheet?
Q2: Can I return an entire rold of data? If yes, how? I only know how to return one cell.
VLookup With A False Return
Jan 15, 2009I have 2 columns of data: Column A is basically postcodes, but just the 1st part and Column B is a #2. If somewhere else on the sheet I type in the postcode IE. SW19 it will show besides it in my lookup the number 2. However if I type in a postcode that is not listed in Column A, I'd like to to return the value 1. I cannot figure this out. My code is:
View 3 Replies View RelatedGet VLOOKUP To Return Zero Is Not Found?
Mar 25, 2009I'm using VLOOKUP to search for results in another worksheet. What I need is 0 returned if the search fails. Currently I'm getting #N/A and that's causing my other formulas to fail.
View 8 Replies View RelatedVLookup To Return 0 And Blanks?
Mar 4, 2013I have a formula that needs to return blanks as blank and 0s as 0. The vlookup formula will return blanks as 0, or I can make it return a blank whenever it is zero (below), but some cells may have a 0 record that need to return 0s, not blank.
Right now I am missing a few records that are entered as "0". I have:
=IFERROR(IF(VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)=0,"",VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)),"")
Vlookup Return More Than One Match
Aug 26, 2007i have a customer work book for outstanding orders of which there are hunderds of rows with there name order number and the items that are outstanding
when i have progressed all my purchased orders i take all the items and run it throught my work book using vlookup to return who wanted what items if any
but what if there are more then one customer wanting the same item how can i get vlookup to know that and return the next match
i'm still very new at excel so can someone please help me
attached is a small test of my work book
if you see item 3182Y/1.0/BLK
you can see it is wanted by both a.f switchgear and amg
but it will only return a.f switchgear
Use IF Statment With VLOOKUP: Return 0
Jan 9, 2009I don't even know if using the IF statement is the right function, but anyway. I am using VLOOKUP to complete a supply list, but of course if the supply name isn't on the first spreadsheet then the result is NA. Instead I want it to return 0.
View 3 Replies View RelatedVLookup To Return Yes And No Values
Aug 5, 2009Is it possible to write a vlookup that will return a value of Yes if the value is true and a value of No if the value is false?
I have data in column A on sheet 1 so the lookup value starts in cell A2 and the table array is on sheet 2 in columns A and B so the column index is 2.
VLookup Return Minimum Value
Feb 18, 2011Here is my starting Vlookup Formula I. I need to alter it as I will state after the formula...
Code:
=Vlookup(A2,REPORT!$A$2:$D$10000,4,0)
Instead of returning the data from column D upon the first match I need the smallest available number to be returned. There will be more than one match and they will all have different numbers to return so I need the smallest return from D.
So in "REPORT" there is many duplicates in Columns A but they all have different values in Column D and I need to return the smallest number from Column of all of those duplicates in Column A.
VLookup Won't Return Any Values
Jul 25, 2012When I use my vlookup function and hit enter, the no value shows up and I can still see the function syntax that I wrote in the cell. Here's a sample of what my sheet looks like:
Number
Name
Hazard
Number 2
[Code]...
I need to know the value in the 'number 3' column is for the 'number' column. For example, I need '1302-76-7' inputted in a column adjacent to one of the first three columns. Another example: I need 'na - 07' inputted in the same row that has a 'number' of '1073'. This is how I want it to look:
Number
Name
Hazard
Number3
[Code]...
When I type in the vlookup formula listed above, nothing happens. This is exactly how it looks in my spreadsheet, even when I click another cell or hit enter. Is my syntax wrong or have I just missed something?
VLookup Return More Than One Value At A Time
Aug 20, 2002Is it possible to have VLookup return more than one value at a time?
View 9 Replies View RelatedMultiple Return Vlookup
Jan 9, 2007Is there a way to get a vlookup for return multiple values if there are reoccuring numbers? for example
A 1
B 2
C 3
D 4
A 5
If those were my two columns, could I get the value A to return both 1 and 5?
Vlookup: Return The Value 0 If G6 Is Blank
Jan 20, 2008I am using the formula : =VLOOKUP(G6,$R$8:$S$16,2) which is fine however i want it to return the value 0 if G6 is blank.
VLookup, Return First Word In The Value
Sep 13, 2008how to modify the below v looup formula so it returns only the first word instead of the whole value
=Vlookup($A7,DATA,13,0)
I am doing a comparison of locations but one sheet has just the Location, the other data is formated as Location-Address
I would just like to return the location as i have an IF formula which checks if both Match and because of this is returning false
Also ii anther part of my work book i am doing a look up on division, at present it is returning the Division name, However i would prefer it to just return the first 3 or 4 Initials of the look up
for example
if the division called err.. Apples Pears Plums Ltd i would like to return APP
if it were Apples Pears Plums Bananas Limited i would like return value to be APPB
Vlookup, Then Return Top Row Value Of Closest Value
Mar 18, 2009I'm trying to vlookup age in column A, then find the closest match of that row, then return the top row's column value of that closes match(largest value less than or equal to). looking for a formula to accomplish this.
For example, for age of 1month, I have a value of 7.5. So, I'd like to return: "5th"
******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDE1Age (in months)3rd5th10th25th205.1928815.570876.1151876.94590830.56.1719496.5359487.0757587.930901417.0704867.4290337.9697898.84744751.57.9690238.3221178.863829.763994Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Vba Vlookup And Return Row Number
Jun 9, 2009I am trying to create a macro and I need it to return the row # based on a vlookup of a date and not 100% sure how to do that.. Hoping to get a little assistance.
I am looking up a date in column A, and need it to return the row #, then I can do the rest of the macro I need. The date I need to look up varies, and is based on the following function I have in a cell elsewhere, but if there is an easier way in vba to write i'm open:
=IF(WEEKDAY(TODAY())=2,TODAY()-3,TODAY()-1)
which basically says if it's monday lookup the date from 3 days ago (friday), otherwise look up yesterday's date. So today it returns 6/8/09 and I need to find the row that has 6/8/09 as the value in column A.
Now the dates in column a, are all formulas that say previous row's date + 1, so the only row that has the actual date in it is the very first one, then we just add a day. Not sure if that matters, but figured I'd give all info.
Vlookup And Roundup Return #n/a
Jun 11, 2009Which returns 0.03316
When I look at the formulas in B17 by clicking on the name of the fuction and then clicking on the function button, the roundup function arguments shows 0.071. Also the vlookup function arguments shows 0.071. Yet I get the #n/a as the result from the vlookup in B17.
I have tried coercing the formula by addin +0 like =VLOOKUP(ROUNDUP(B15,3)+0,$N$2:$O$91,2,FALSE)
I have also tired *0 like =VLOOKUP(ROUNDUP(B15,3)*0,$N$2:$O$91,2,FALSE)
Here is a kicker... When I replace B14 with 0.9 or 0.7 or 0.6, the formula works. but I get a #N/A on 0.5.
Vlookup & Return All Values 2
Jul 7, 2009Very similar to the original thread 'vlookup & return all values', i need to lookup a velue and return all the relevant values.
Unlike the original thread, i need the macro to return an array of cells, rather than just one.
The macro from the original post was this
Public Function FindSeries(TRange As Range, MatchWith As String)
For Each cell In TRange
If cell.Value = MatchWith Then
x = x & cell.Offset(0, 1).Value & ", "
End If
Next cell
FindSeries = Left(x, (Len(x) - 2))
End Function ............................
Vlookup Two Values And Return Another One
Oct 16, 2009I have two workbooks which are data dumps from another program. Say I have WO #, Task #, and Cost in workbook1 and WO #, Task # in workbook2. I need to compare the WO# in workbook2 with WO# in workbook1 if it matches I need to compare the Task # in workbook2 with the Task# in workbook1 (but it must compare the same row in which the WO # match was found) then it must return the cost from workbook1 to workbook2 ( again the cost must come from the same row in which the WO and Task match were found in).
This could be a VBA code or even a formula that does not matter.
Vlookup Horizontal Return
Feb 25, 2010I am simply trying to do a standard Vlookup but since there are multiple returns for any given match the best results for me are to return them horizontally on the same line in seperate columns.
My original formula holds all the same information, nothing is different except where I want the values to be returned. Here is the original...
=VLOOKUP(K2,'Open PO'!$A$1:$D$13000,3,0)
and...
=VLOOKUP(K2,'Open PO'!$A$1:$D$13000,4,0)
I have been putting formula 1 (Single Return) into Column X but need the multiple returns to return to X, Y, Z, and AA
I have been putting formula 2 (Single Return) into Column AB but need the multiple returns to return to AB, AC, AD, and AE
There should not be more than 4 returns per match so if anyone could help me with a formula to return each of these formulas horizontally like this.
Vlookup Return A Formula Instead Of A Value
Feb 7, 2007The main sheet on my workbook has 3 fields- 'Type' , 'Data1', 'Result'
For a given row, a certain formula will be applied on 'Data1' to calculate 'Result'. The formula will vary based on the value of 'Type'.
So example if Type = A, Result= Data1*10
Type = B, Result= Data1*20.
The actual formulas are a lot more complicated.
I know this can be done using a nested if statement, but I would like to know if this can be done using Vlookup (where the formula is returned and it is applied on 'Data1')?
I don't mind any other solution as well as long as I don't need to write a long nested if statement!
Vlookup To Return One Value From Multiple Columns?
Sep 21, 2013I have two separate worksheets, and I am trying to create a Vlookup or Index and Match formula. Here is the example:
Sheet 1
Cell A1= Employee ID: 123-D.
Sheet2
Vlookup A1 from Sheet 1, and match the first five characters to Column A, Column I and Column P. If a match, return name (e.g. John Doe) in Sheet 1, cell B1.
Vlookup To Return Multiple Values
Jul 6, 2007Is there a way where i can vlookup a column and return all matches if there are multiple values?
View 5 Replies View Related