When I look at the formulas in B17 by clicking on the name of the fuction and then clicking on the function button, the roundup function arguments shows 0.071. Also the vlookup function arguments shows 0.071. Yet I get the #n/a as the result from the vlookup in B17.
I have tried coercing the formula by addin +0 like =VLOOKUP(ROUNDUP(B15,3)+0,$N$2:$O$91,2,FALSE)
I have also tired *0 like =VLOOKUP(ROUNDUP(B15,3)*0,$N$2:$O$91,2,FALSE)
Here is a kicker... When I replace B14 with 0.9 or 0.7 or 0.6, the formula works. but I get a #N/A on 0.5.
I have a formula that calculates a revenue per day by taking total revenue devided by total days, from that I have another cell doing a VLOOKUP on that to find what tier that value falls under almost like a grade book, however I need the division to be rounded up if greater than x.xx5 because when I do the VLOOKUP sometimes it drops the product to the lower tier when I needed it rounded up. example:
I am trying to get excel to roundup to the nearest 100 any numbers that are in 3 columns. Each row in these columns are then added together for a total sum of that row. How can I get all the numbers in these three rows to be rounded up to the nearest 100 after entry?
I am trying to create one formula (in one cell) so that it performs the following three things:
1) Rounds any number to the nearest dollar
2) Makes the minimum dollar value $2.00
3) If another cell (G2) reaches $100.00 or more, I want it to revert to another cell's (B2) value.
So, in essence, I want to combine the following two things:
=MAX(2,ROUNDUP(F2,0)) AND =IF(G2>="100",B2)
I do not know how to correctly order these so that it performs all three things I'm looking for it to do. I've posted this before, but was given an answer that created a circular reference and did not make the minimum value $2.00.
A UDF function seems to interfere sometimes with the rest of the workbooks entire process for some reason.
I could use the CEILNG function to work around the glitch, but it does not seem to allow the flexibility required because it takes everything to 1. So for example if a Value is 9.24, CEILING will Sum to 10 when when it must be 9, unless I'm missing something. But if the Value is 9.25 or 9.26 then rounded value must go to 10
The basic math required in the formula bar then is: ...
I've got a data dump that must be edited/converted prior to pushing it into a different main frame system. There can be NO decimals in the end result. Here's the challenge:
Starting on Row 2, there's a break down of 4 quarters of data divisible by 4 using the whole number TOTAL of Parts in Col A.
The analyst must first break it down into 4 parts (as done in Col B through E). Then, round up and down appropriately to ensure that NO DECIMAL data is entered into another main frame system.
Can't copy one formula downward because if it ends in .50, the up/down sequence is diff from how it would be rounded if it ended with .75.
Need vba to be smart enough to evaluate "IF" and apply "THEN" according to what it sees in Col B's data and convert B, C, D and E appropriately. (I will tie this to a button within a toolbar to run the macro/vba when the conversion of B thru E is needed.
EXAMPLE: IF B's data ends in: xx.00 or xx.50, then convert those 4 quarter's data accordingly: ROUNDUP, ROUNDdown, ROUNDUP, ROUNDdown, (this one doesnt really matter but works)
IF B's data ends: xx.25, then convert those 4 quarter's data accordingly: ROUNDUP, ROUNDdown, ROUNDdown, ROUNDdown,
IF B's data ends: xx.75, then convert those 4 quarter's data accordingly: ROUNDUP, ROUNDUP, ROUNDUP, ROUNDdown,
Using ROW 6 as an example for how to handle xx.25's: B6 would convert up to 4 C6 would convert down to 3 D6 would convert down to 3 E6 would convert down to 3 TOTAL after conversion = 13
PROBLEM: B10 (see below) is a Vlookup and it is preventing C1 to return the name of the agency: AIB or MOODY - Instead I get TRUE or FALSE, No use to me.
I'm trying to use the VLOOKUP function to return value from a row below.
I have a large list of numbers (sheet Data) for the entire year with 8 different items per week, and I need to create a list for each week with group of 8 unique items as shown on "Week 21" sheet (I did it manually by copy and paste, highlights are just for the example, don't need to be at the original file). After the first 8th rows, it should start over until it gets to the last value on sheet "Week 21".
Basically, Column B on sheet "Week 21" should be statics, and once I change value on column A it should return values as in the example automatically.
I am trying to use vlookup to locate a cell in another work book. The identifier is in the same workbook as the vlookup formula however the table and column to look within is in another. The identifier will also show up in the other work book where the table resides.
I have this formula "=VLOOKUP(B5,$F$254:$G$258,2,FALSE)" I want it to return a "0" when cell B5 is not populated. How could I do that? Right now it returns "#N/A" and messes up my math down the sheet..
Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
Q1: In the range for the lookup I'm performing, the column with the possible match is the 2nd column. I've tested my function with this range, but it fails (range is $A$x:$K$x, with possible matches residing in column B). If I change the range so the 1st column has the desired data ($B$x:$K$x), it works. Can I modify the function to search using the 2nd column so I don't have to rearrange the columns in my worksheet?
Q2: Can I return an entire rold of data? If yes, how? I only know how to return one cell.
I have 2 columns of data: Column A is basically postcodes, but just the 1st part and Column B is a #2. If somewhere else on the sheet I type in the postcode IE. SW19 it will show besides it in my lookup the number 2. However if I type in a postcode that is not listed in Column A, I'd like to to return the value 1. I cannot figure this out. My code is:
I'm using VLOOKUP to search for results in another worksheet. What I need is 0 returned if the search fails. Currently I'm getting #N/A and that's causing my other formulas to fail.
I have a formula that needs to return blanks as blank and 0s as 0. The vlookup formula will return blanks as 0, or I can make it return a blank whenever it is zero (below), but some cells may have a 0 record that need to return 0s, not blank.
Right now I am missing a few records that are entered as "0". I have:
i have a customer work book for outstanding orders of which there are hunderds of rows with there name order number and the items that are outstanding
when i have progressed all my purchased orders i take all the items and run it throught my work book using vlookup to return who wanted what items if any
but what if there are more then one customer wanting the same item how can i get vlookup to know that and return the next match
i'm still very new at excel so can someone please help me
attached is a small test of my work book
if you see item 3182Y/1.0/BLK you can see it is wanted by both a.f switchgear and amg
I don't even know if using the IF statement is the right function, but anyway. I am using VLOOKUP to complete a supply list, but of course if the supply name isn't on the first spreadsheet then the result is NA. Instead I want it to return 0.
Is it possible to write a vlookup that will return a value of Yes if the value is true and a value of No if the value is false?
I have data in column A on sheet 1 so the lookup value starts in cell A2 and the table array is on sheet 2 in columns A and B so the column index is 2.
Here is my starting Vlookup Formula I. I need to alter it as I will state after the formula...
Code:
=Vlookup(A2,REPORT!$A$2:$D$10000,4,0)
Instead of returning the data from column D upon the first match I need the smallest available number to be returned. There will be more than one match and they will all have different numbers to return so I need the smallest return from D.
So in "REPORT" there is many duplicates in Columns A but they all have different values in Column D and I need to return the smallest number from Column of all of those duplicates in Column A.
When I use my vlookup function and hit enter, the no value shows up and I can still see the function syntax that I wrote in the cell. Here's a sample of what my sheet looks like:
Number Name Hazard Number 2
[Code]...
I need to know the value in the 'number 3' column is for the 'number' column. For example, I need '1302-76-7' inputted in a column adjacent to one of the first three columns. Another example: I need 'na - 07' inputted in the same row that has a 'number' of '1073'. This is how I want it to look:
Number Name Hazard Number3
[Code]...
When I type in the vlookup formula listed above, nothing happens. This is exactly how it looks in my spreadsheet, even when I click another cell or hit enter. Is my syntax wrong or have I just missed something?
