# VLookup On Cell Has Multiple Values?

May 14, 2014vlook up.xlsx

View 14 Repliesvlook up.xlsx

View 14 RepliesADVERTISEMENT

two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)

I need to create two formulas:

1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.

2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.

I tried searching for a solution to my formula problem in this forum regarding vlookup and saw similar formula e.i returning multiple values but it doesn't cater with what I need.

Vlook is returning only the first value but what I need is to return all the multiple return values in 1 cell. I've attached a sample worksheet for reference.

OK for example if i hae this list of data:

Invoice number Order number

111 560

112 561

112 562

113 563

What i need to do is a vlookup from the above table to return the following:

Invoice Number Order number

111 560

112 561, 562

113 563

Traditionally the vookup will return the first value it can match. I can return multiple values on different lines using an array formula but this is not useful.

In the example below I have table array A1:B8. Lookup criteria in cell A11 and want to return MULTIPLE values from column B in cell B11.

I would prefer to not use VBA if possible

A

B

1

[Code]....

code1

code2

lookup Range1

lookup Range2

Return Value

Lookup

Multiple Return

[Code]....

I am trying to vlookup multiple value and return multiple values in one cell

I am trying to simplify a complex array formula using a UDF. I am trying to return multiple corresponding values horizontally. Can this be translated to VBA?

=INDEX($B$2:$B$8, SMALL(IF($A$11=$A$2:$A$8, ROW($A$2:$A$8)-ROW($A$2)+1), COLUMN(A1)))

A11 is the lookup value

A2:A8 is the range where A11 is located

B2:B8 is the value I want to return

I've sorted the second row by price on the second sheet, but how do I get the corresponding category and quantity numbers? A normal Vlookup formula would return '8' twice on (a) and (b), but I need both 8 and 6... So only one value should be returned at both (a) and (b), as long as all different quantities are covered.

View 5 Replies View RelatedI have made a spreadsheet where I want to input data and transport it to a rent card information.

I want to use vlookup to find the apartment number in a different spread sheet and fill in the information on a different spreadsheet (rent, fees, utilities).

I get how to use vlookup to get one value but I need 10 values to return.

Is there a way where i can vlookup a column and return all matches if there are multiple values?

View 5 Replies View RelatedI have a list of countries in column A, there are duplicates in this list. In column B are numbers corresponding to the country.

A B

IRELAND 1221

GERMANY 2341

USA 3443

IRELAND 2231

Ireland could be in the list and have up to 20 different values beside it in column B

On a separate sheet i have a drop down list of all the countries. I am looking for a vlookup or something similar to return a list of all the numbers beside IRELAND when Ireland is selected in the drop down list.

I had been trying a vlookup but this looks at the list and stops at the first "IRELAND" it finds and just returns the value beside the first "IRELAND"

i have a set of data in which i'm trying to lookup a value from a range of file #'s (ex 100-125) that i have concatenated with a file ID (ex 123456789). as of right now i have to vlookup each individual concatenated number, return the result value in its own column (one for 100, one for 101 and so on..) and then sum all 25 columns to get the final number) is there a way to vlookup the range (ID+100:125) and sum the results?

here's the formula i use for each column starting with 100, A2 representing the file ID, C:O being the array

=IF(ISERROR(VLOOKUP(A2&100,$C$2:$O$10000,13,FALSE)),"0.00",VLOOKUP(A2&100,$C$2:$O$10000,13,FALSE))

Trying to pull data from one workbook to another using Vlookup.

The worksheet has 7 columns (date, day of week, time or arrival, package, departure time, patron count and group name) I would like to pull all the data for a specific date in a seperate workbook.

I know I require a nested formula but cannot seem to get the variables correct:

formula to vlookup and return multiple value in a single as per the attachment.

View 7 Replies View RelatedI have a workbook with 2 sheets. The sheet called 'data' contains all purchasers names (which do get repeated), the item they bought and 3 item costs, all in range A1:E15. The 'lookup' sheet allows the user to enter a purchasers name in cell B1, then I want all the items that purchaser bought listed with the corresponding item costs. I've attached a sample spreadsheet.

View 3 Replies View RelatedI have run into serious trouble with a file I am working on. I have 12,000 companies (roughly), and each of them appears in an Excel file multiple times (some 1 time, other 18 times) with a few parameters. The big file (about 90,000 entries) is sorted so it looks like below:

I will illustrate for 2 companies:

Company A 0 200

Company A 0 0

Company B 300 400

Company B 0 50

I need for every company to do a countif for each column on condition

that the value is larger than 0.

In this case I would end up with:

Company A 0 200

Company A 0 0

Countif result 0 1

Company B 300 400

Company B 0 50

Countif result 1 2

However, I need to extend this to the whole 90,000 entries and 12,000 companies and this cannot be done manually. I thought about vlookup but that returns the first entry only, and I have multiple.

I am using the VLOOKUP function to get the exact corresponding value in one particular column. But I need to have two different value in two different columns. Here is an example.

I have attached the excel sheet as well.

Actually I do send the data to my different colleagues and they do send me back with the responses in two different column of D and E corresponding to the "ID" specified in column "B". Which I do need to MAP individually. But I want Excel to map the value of that "ID" (column B) to the corresponding responses in Column D and E with formula.

VLOOKUP generally gives corresponding value to either column D or E but i want both at a time to save time.

UPLOAD_DATA.xlsx

I'm having trouble getting my payroll data to combine. I've been using VLOOKUP to look up employees by their Personel Number (Column A) and return their name (column B), Cost Center (Column C), the Fund that they are paid from (Column D) and the Amount they are paid (Column E). The problem is that some employees are being paid out of 2 or more funds and VLOOKUP is only returning the fund that appears first, leaving out the other portion of their pay and thus making my grand total quite far off. How can I get Excel to return all the entries for a particular Personel Number? There are more than 16000 employees, so this is no small spreadsheet.

View 14 Replies View Related I've been trying to research vlookup to see how I can use it or something like it to return multiple value for a dynamic chart I'm trying to build. I've found several paged to give examples but I can not seem to figure it out with my sheet b/c the examples differ from mine I have a financial spreadsheet with several categories and I want to make a chart for all my utilities. i need a array formula (i think) that will search for (example) My salary, my wife's salary and other income and extract those values in the next column (Credit (+)) to build a chart... (i will use this same concept to make other charts as well.) The Categories column is F and the values will need to be extracted for the chart are in G. doesnt matter where they are extracted to but for the sake of being speific ill say starting P50.

(first row below headings is row 5)

CATEGORYCREDIT (+)DEBIT (-)Salary - Byron$ 2,571.11 Utility - Electric$ (154.25)Salary - Felicia$ 1,120.20 Utility - Gas $ (79.47)Mortgage$ (852.01)Salary - Byron$ 2,499.53 Other Income$ 150.00

I am up for any way that this would be possible ....

View 17 Replies View RelatedI have attached a file with an example of what i am looking for. The data in columns A and B are my original Data. There are multiple instances of e-mail address on the left but I need to bring in each data horizontally. I would like a formula to enter into E2:J6 to pull the information in.

Book2.xlsx

I'm trying to use vlookup to return multiple values for the same unique identifier. I've read a couple of examples within the forums, but I haven't been able to find anything I understand. I have employee ID's and these ID's have specific access associated with their ID's and each access is listed within a different row. Within a new spreadsheet I removed all duplicates of the employee ID so now I no longer have a one to one match between spreadsheets, so I would like to create a vlookup that will list all access associated with each employee ID. I have attached a sample of the data sheet I am working with.

View 5 Replies View RelatedHave spent ages on this to no avail. Need the attached sheet to verfiy the values in the "Reconciliation" are correct when referencing the "Prices" sheet. I need column F (Reconciliation sheet) to lookup the "Code" in column B in the "Prices" sheet and then further look up the "Payment Frequency" (column D in the Reconciliation sheet) in the "Prices" sheet to verify that the price is correct.

Due to slight decimal point issues, if the value has a greater than 0.02 difference then display "ERROR" otherwise 0.

I am attempting to graph data based on work down in specific work centers to track efficiency. I can download all items that were finished for a certain time frame (yesterday, last month, last year, etc.), but the data only shows up as the item, quantity, and the date of closure. I take that info and copy and paste it to the close out tab of the other work book, where it references another sheet to pull in the time required to complete the task, and the work center that did the work. My problem is when an item has multiple work centers on the same item and then taking that info into a pivot table to graph. This can be done manually, but I was hoping I could create a way to only have to copy and paste the data and have it return the work done.

I have included a shortened version of what I am trying to do, eventually there will be 25000+ items on the data tab, but if I can get this to work, then i assume I can extrapolate.

I have the following 'numerical values'

2510000.011

3010000.011

3510000.011.3

2518000.032.5

3018000.043

3518000.043.7

2530000.125.5

3030000.145.8

3530000.176.2

With the first two values as criterias, I need to find the 3rd and 4th value

Example: If I have the criteria as 30 and 1800 , I should get the result as 0.04and 3

I want to find sum of all 4 returned values (Sales!BL5, Sales!BM5, Grants!X5, Deferred Pymts!X5

Column References:

Cell AD2 (AMOUNT TOTAL PYMTS)

Cell AC2 (TOTAL NO. OF ORDERS)

Cell Range B5:B4833 on multiple pages (CUSTOMER NAME)

Cell Range AJ5:AJ4833 on multiple pages (CUSTOMER NAME)

Formula:

In Cell AD2 of CustomerData! Sheet:

If AC2 is not blank, then

look for match between A2 and Sales!B5:B4833, return the value in Sales!BL5, and

look for match between A2 and Sales!AJ5:AJ4833, return the value in Sales!BM5, and

look for match between A2 and Grants!B5:B4833, return the value Grants!X5, and

look for match between A2 and Deferred Pymts!B5:B4833, return the value Deferred Pymts!X5

Hope this does not confuse, but if John Doe is listed in AC2 I want to find the sum of his total payments if his name is listed as a customer in Sheets Sales, Grants, and Deferred Pymts. The Sales! sheet is divided into AM and PM pricing which explains why Sales! has Column B and Column AJ for Customer Names.

I'm trying to get a more manageable formula for totaling multiple values in one box using Vlookup. For clarification this is what I mean:

On spreadsheet A, I have this table:

[IMG][/IMG]

The value in B2 is the name of the item I am making and the items below are the components required to manufacture said item. In order to build them, I need so many (Column E) and I have indexed my remaining values simply by doing =E3-H3. To build each component requires minerals which are listed on a seperate sheet (Sheet B) as such:

[IMG][/IMG]

The only Value in the above table I am truly interested in is "Current" (E Column).

Back on SheetA, I have a second table which adds all of the component minerals up for a grand total of the minerals required to make the item in B2 as such:

[IMG][/IMG]

Now, this is my issue: The code for N3 is incredibly unwieldy:

=IF($F$3>0, $F$3*VLOOKUP($L3,

'Component Materials'!$A$15:$E$21,5,FALSE))+IF($F$4>0, $F$4*VLOOKUP($L3,

'Component Materials'!$A$25:$E$31,5,FALSE))+IF($F$5>0, $F$5*VLOOKUP($L3,

'Component Materials'!$A$45:$E$51,5,FALSE))+IF($F$6>0, $F$6*VLOOKUP($L3,

'Component Materials'!$A$55:$E$61,5,FALSE))+IF($F$7>0, $F$7*VLOOKUP($L3,

'Component Materials'!$A$65:$E$71,5,FALSE))+IF($F$8>0, $F$8*VLOOKUP($L3,

'Component Materials'!$A$115:$E$121,5,FALSE))+ IF($F$9>0, $F$9*VLOOKUP($L3,

'Component Materials'!$A$135:$E$141,5,FALSE))

I set this up to look at a specific value and if it was >0, it would multiply that value times whatever value it found on SheetB ("Component Materials"). The size of this formula makes this difficult to migrate to further items, so I would like to reduce the complexity of the formula.

I am trying to use a =vlookup(and( type formula. Excel accepted my syntax, but the formula is not working. Here are the details:

=VLOOKUP(AND(E2,O2),'[SOURCE DATA FOR PROFILES.xlsx]Sheet1'!$B:$G,6,FALSE)

The values from cell E2 and O2 are both present on a row in the SOURCE DATA spreadsheet, and column 6 is the last column in my table (both values appear before column 6, but not next to each other).

The formula returns #N/A. Under those circumstances, shouldn't it return the value of column 6 on the row where those two values are present together?

Do the columns containing the values have to be next to each other in the table for this to work? Does the data type matter (one is a number, the other a street address)? The value to be returned is a number.

My problem is how do i get multiple column values at one shot.

For example in one excel sheet i have columns A,B,C,D,E and in A column i have all the Partner ID's and rest of the columns i have the data.

Now in other excel file I have Partner ID's which are not in order...now i want the data in all 5 columns according to partner id's from the previous sheet i need to do a vlookup function for five times to get the same data....is there any way that we can do it in one shot.

Is there a way where i can vlookup a column and return all matches if there are multiple values?

View 3 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved