I have attached a file with an example of what i am looking for. The data in columns A and B are my original Data. There are multiple instances of e-mail address on the left but I need to bring in each data horizontally. I would like a formula to enter into E2:J6 to pull the information in.
Book2.xlsx
My Data
Service 1 | 100 | 1.5$
Service 1 | 200| 2.5$
Service 1 | 300| 3.5$
Service 2 | 100| 11.5$
Service 2 | 125| 21.5$
Service 2 | 300| 30$
I need to extract the value in the third column according to an exact match of the first column (the service name) and a range match of the third column.
I tried SumProduct but the problem with my formula was:
Let's assum I ask for
Service 1, 200
The formula summed up 1.5 and 3.5 and returned 5
When I wanted to return one value from this table.
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
Trying to pull data from one workbook to another using Vlookup.
The worksheet has 7 columns (date, day of week, time or arrival, package, departure time, patron count and group name) I would like to pull all the data for a specific date in a seperate workbook.
I know I require a nested formula but cannot seem to get the variables correct:
Not sure where to start with this one, an IF statement or vlookup? Basically I have 3 columns A, B, C (original sheet) and A, B, C in my working sheet. A contains car registrations, B contains a date and C contains a weight. I need to return C from my original sheet into my working sheet only when A and B BOTH match from my working sheet (there are scenarios where the same car registration has a different date next to it). So I want to return the weight only when the car registration and the date match in a specific instance from my working sheet.
View 6 Replies View Relatedmaking a forumla that will return the second, third ewtc values using VLOOKUP or INDEX/MATCH. Attached is a dummy file almost identical to the one I'm working in. In the first sheet there's a dependent drop-down list with the values Sub1, Sub2 and Sub3. This corresponds with data in sheet two listed next to these names. The problem is when I try to populate the table below using VLOOKUP etc it just repeats the first row over and over rather than defaulting to the second and third row results
View 6 Replies View RelatedI have a table of data, one column is for the names of all these branches of our offices, that consist of 2 alpha numeric digits. For instance one branch is 6G, then another is 6F, 8G, etc. The other column has a raw number in it. So I'm doing a vlookup for the first column to return the value in the second column. But, vlookup automatically returns a value thats the next one over if it can't find the vlookup value. For instance, if it can't find 6G it'll just give me the number it finds for 6F. But I don't need that! I just want it to return either a zero or n/a if it can't find 6G.
View 4 Replies View RelatedI've tried to amend the formula's posted above but to no avail so am hoping someone can have a look at the attached.
I would like to be able to use Vlookup or similar to complete a table (starting in cell A19) based on the surname added in B16.
I am trying to connect a special date and a price to a special name (please see the attached file).
In sheet 1 I have the following:
- In column A I have a set of different names.
- In column B I have a set of different dates.
- In column C I have a set of different prices on bonds that off course refers to the different names at their respective dates.
In rest of the sheets I want an overview of the different bonds, and what their prices are at the exact date. The problem is that if I use the vlookup it is only the first value that will be extracted. How can I get all of the prices corresponding to the different dates to the correct bond. I also want the possibility to update this every day.
Basicly i have a list of information and i need to be able to enter a start data in one cell and a end date in a different cell and then return all the dates between them.
View 1 Replies View RelatedI have an attendance sheet that employees scan their badge number, and returns their name and time/date stamp using a simple VLOOKUP.
I want to create a report that compares the names in the attendance sheet against the all the names in the master sheet, and only returns the names that have not attended the training.
I have tried a few test formulas using COUNTIF function, but with no luck.
I have attached an example. Use the worksheet labeled April 2014 A (2nd shift)
New Six Point Safety with Attendance Sheet Barcode Scanning.xlsx
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
I'm working on a database right now for our school, similar to a directory. What I want to do is be able to look up what items a staff member has been issued and when/if they were returned. What I have right now is one sheet with all the information about the staff that looks like the one below. I want to create a separate sheet where you could look up a staff member by last name and can find all the information in the array relative the the specific cell looked up.
Last Name
First Name
Position
Building
Items
So, on the "lookup" sheet, I want to be able to input either Doe and have the look up return cells B2:E6, or if I input Smith it should return cells B7:D11.
I've been experimenting with Vlookup, hlookup, index, and match but haven't been able to get exactly what I want..
I'm attempting to match a name with the row and column numbers of data that is laid out in a grid format. It looks something like this:
Denson
Matthews
Smith
[Code]....
This works just fine, except for the fact that once in awhile the same name will appear in the grid twice, and the row and column returned will be off (it will return the row for one of the Smiths, for example, and the column for the other).
I know why this is occurring so I'm looking for a better way to do this. The good part is that I don't necessarily need both locations returned for each "Smith" ; I just need the correct row and column for at least one of the instances. I'm looking for a better way to do this.
How the following problem gets sorted out
ColumnAColumnB ColumnEColumnF
33rohan55
44tata55
55dev44
55rony33
As you can see from above i want to lookup all the values in column E in column A and return the corresponding value in column F.
I'm trying to get a value to return based upon three criteria, sales rep, compensation plan and calculation method.
For each sales rep (there are 20 reps), there is an option for one of five comp plans and for every comp plan, there are six calculation methods (these six methods are the same for every one of the five comp plans).
I know I need to use the Indes(Match()) set-up, but I'm having the darndest time figuring out how to set up the source matrix to do this right.
I have two Columns C and E that have dollar amounts in them. I want to compare each row in those columns and then total the number in column C that are higher that column E.
So basically C6>E6, C7<E7, C8=E8,C9>E9 should return the result of 2. There are two instances where the price in C is higher than the price in E.
Actually I plan to create an eRequisition Form for our branch sites. My focus would be the consumable items of Lexmark printers. I want to create cascading drop-down lists based on data table (worksheet : All) as per attached. From lots of examples I've seen in this or other similar forums, I notice that in order to allow this cascading to work is by creating column with header name identical with the input in the 1st List. But I'm thinking, if I need to do that, then there gonna be hundreds or maybe thousands columns to create as the number of branches are expanding, so I think tht should not be practical.
I found examples that shows how lookup 1 value can return multiple values but I totally cannot think of a way to allow those multiple values to be returned as dropdown list rather than displaying all in rows of the worksheet.
What I need is that, in 1st list, upon selecting the branch, it'll populate all items related to the branch and when selecting the item, it'll populate brand/model list for the particular item only. The input in the dropdown list should not have duplicates. Been trying using pivot to do this with macro that enables auto refresh once any changes made in the table.
create this cascading drop-down lists just based on the table as per attached? I really want to avoid having to create extra tables to allow this cascading to work.
[URL]
I have been trying to find a formula for this but I have yet to find one that works for me.
Data;
English - United Kingdom, Czech, Spanish
UK - United Kingdom
Swedish
English - US
French
US
France
German
Portuguese
+8000 more various values
I am looking for a formula that can search for multiple values e.g. english, us, uk and united and then return the value "Yes".
I was looking for something that includes wildcard searches or contains so that it is not affected by upper or lower case but combining this with multiple searches was proving difficult.
From the following example:
A1 TAG B1 mileage
G10-1622 15246
G10-1622 15246
G10-1583 15246
G10-1622 28659
G10-1195 28659
G10-1622 28659
desired results
Enter tag in cell
G10-1662
Mileage
15246
15246
28659
28659
I would like to enter a particular TAG # in I5 and return all the mutiple associated data
See attached : tire2.0.xls
I am using the following formula:
=IFERROR(INDEX(drange,SMALL(IF(AND(qrange="SH",trange>30),ROW()-6),ROW(A1))),"")
to return the name (drange) of a person who was visited by "SH" (qrange), more than 30 days ago (trange).
There are faults in my formula, and if I'm honest I don't entirely understand it !
I need to return all of the names of people who were visited by "SH" more than 30 days ago. So I need the next value, and the next which is also over 30, by copying the formula down to the next cell and the next. My problem is that I get the first value (which is correct) and then the next ones are blank.
To make matters worse, the first value I get is only correct if i DON'T enter it as an array. If I do enter it as an array, I get the first row of the spreadsheet.
Using Excel 2003
I have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
how I can keep a running total of information added to a different worksheetS. They would not always be the same peson ID so I would like to return a match on any unique ID number found on multiple worksheets and add their values on a master front sheet. i.e this becomes a running total of items purchased per ID number.
View 4 Replies View RelatedI'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:
1st sheet:
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
I have 180 rows of data like this one in the first sheet
Second sheet(named sheet 1) is not used for this
Third sheet(named sheet 2):
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I am using excel 2007 and windows 7.
This is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
View 2 Replies View Relatedtwo formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
I am creating a payroll spreadsheet that will look up tax deductions from a spreadsheet I pulled from the IRS website. The first two columns represent a range of values the employee's pay would fall between. The first column is "paid at least" and the second column is "but paid less than".
Once I locate which row the employee's wages fall between, I would then need to match their number of withholdings with the corresponding column. Columns 3, 4 and 5 have headings to represent 0, 1 or 2 withholdings.
The value I need returned would be the intersection of wages paid and withholdings. For my spreadsheet example, if the employee's wages are 1,023 and they have 1 withholding, I need the formula to return 147. I was able to find a vlookup/match formula but it worked only without a range of wages paid.
For example, if the employee was paid exactly 1,030 and had 1 withholding, it would vlookup/match to return 147. Obviously, this won't work with me needing to find the correct row based on where their wage falls in the ranges.
I've attached a picture of the spreadsheet example below. payroll example.jpg
Im trying to make a vlookup so I can say find a record where column A is >4, B is =2, C is 1.
Example - The lookup would find these 2 ranges.
7
2
3
2
6
4
[code]....
I've used VLOOKUP based on matching one column and returning one result. No problem. Now I need to return one result based on 3 columns matching.
Assume this range of columns is named: TravelDays
Origin...Location...ShipVia...TravelDays
33778...420...UPS...3
33778...425...UPS...1
33778...440...UPS...3
33778...443...UPS...3
33778...446...UPS...2
33778...447...UPS...3
33778...449...UPS...5
33778...475...UPS...3
What I'm trying to accomplish is if these columns match:
i2=Lookup!TravelDays,1
E2=Lookup!TravelDays,2
N2=Lookup!TravelDays,3
My result should be: Lookup!TravelDays,4