This code appears to do opposite of what I intended i.e., when I click 'Yes' button it closes the file without saving; and when I click 'No' button it closes the file with saving?
Private Sub btnExitNewPipes_Click()
If MsgBox("Save the Data?", vbYesNo + vbQuestion, "File Save") = vbYes _
Then ActiveWorkbook.Close SaveChanges = True
ActiveWorkbook.Close SaveChanges = False
End Sub
I've been looking for a way to save a worksheet as a PDF document and place it in a folder in Documents.
View 4 Replies View RelatedI have a workbook that has twenty data sheets. The user presses a button that copies they're specified sheets to a new workbook and prompts them with the SaveAs Dialog. How do I code it so that if they press the CANCEL button on the SaveAs Dialog it closes the created spreadsheet without saving it?
View 6 Replies View RelatedI have a spreadsheet with 6 buttons on it. Ive been using the code from Daves Download Page to log users of the spreadsheet, however im now want to log which button is being clicked the most. Is this possible? Ive tried to do it myself, by adding a hidden sheet, and adding code to each button to add a line to the new sheet each time the button was clicked etc, but faield miserably.
View 2 Replies View RelatedI have attached my excel database, as think I'm having a funny moment, I keep getting an error message of Object Reuired when I click on the form button to launch the Input Form, where have I gone wrong as to why the Input form will not load?
View 5 Replies View RelatedI keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies View RelatedI am getting a Type Mismatch Error when I run the following code.
I need to have the name save as
06-01-2012 dispositions.xlsx
in a specific location that is in this line of code. When i have it put 'dispositions' first, it works, but i need the date to show first in the name. Am I missing an additional function or quotes?
HTML Code:
ActiveWorkbook.SaveAs Filename:="C:DataSales TeamReview DatabseDispositions" & Year(Date) & "" & MonthName(Month(Date)) Format(ActiveSheet.Range("H1"), "mm-dd-yyyy") & "dispositions.xlsx", FileFormat:=51
Is it possible to set the default page to open when clicking the file button? In particular, I use the recents feature a lot but never have I looked at the information on the information page. Everytime I click the file button I have to then select recents which is annoying.
View 5 Replies View RelatedI've created one file, that acts as a launching file. It does several things, including environment validation, and downloading new files from a web repository, etc... Once it has done everything it needs to do, it launches a 2nd file (the main user input file - which is tied to an external DB), fires the start-up routine in that 2nd file, then quietly gets out of the way.
This all works perfectly, unless the 2nd file gets closed before the start-up routine is finished. (this could happen for several reasons, including invalid login credentials). I've oversimplified the issue below: ...
Private Sub Workbook_Open()
MsgBox "Insert Text Here" , vbOKCancel
End Sub
What I would like to do is have a MsgBox open up that states this file is confidential and you click 'I Agree' button, or a cancel "I Decline"
I do not want the spreadsheet to be visible until they click on 'I Agree' button, and then if they click cancel, the Excel closes.
This is not a huge security issue, just a reminder for the Top Brass not to email out the file. This is for looks and show only
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
what code I can put behind a button so that once I click on that button,
What ever cell i click on, the whole row of that cell will be colored a certain color.
Is this where i would used a target approach?
When loading my workbook, my userform loads perfect, but when I go to hit the "next" button. It crashes with the error:
"Path/File access error."
The next button code, quite simple: ....
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies View RelatedI have numerous spreadsheets that I need to open and unhide a sheet, that has XML data stored in cell A1. What I need to do is copy that data in cell A1 and paste it into a text document and save that as an XML file saved as the XLS workbook name with a date stamp.
I'm running into many issues, the main issue is the saving as current file name, and the formatting of the text/XML file.
Here is my current code, which doesn't reference the current file name and is just very generic. Once I get the saving as file-name correct and the formatting of the xml file correct, I will work on it a bit more.
Code:
Sub Test()
Dim Rng As Range
Dim wb As Workbook
Set Rng = Range("A1:A2")
Set wb = Workbooks.Add
With wb
Rng.Copy
[code]....
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
View 9 Replies View RelatedI was wondering if there is a way to write a macro that will take an excel file that I have called Alldata and then have it copy the first two sheets to a new workbook named something else( FullSparameter_0) and then copy the name of the third and fourth sheet into the new FullSparameter_0 workbook and then copy column A-E from sheet dB Alldata.xls and paste it into the FullSparameter_0.xls workbook in the same dB sheet in the same spot. And do the same thing with the Phase Sheet. i know this sounds confusing, but im really new to the VBA stuff.
I just need 15 different files from the original Alldata.xls that will be named FullSparameter_0, FullSparameter_1, .., FullSparameter_14. but each file will have the same two first sheets, Setup Information and Cal Verification, and the same last two sheet names, dB and Phase, but then in the dB and phase sheets, it will copy over the next four columns of data. so in FullSparameter_0 it will have column A-E from sheet dB in Alldata.xls in the dB sheet in FullSparameter_0 (Same with the Phase Sheets). Then in FullSparameter_1 it will have column A and Columns F,G,H and I (for dB and Phase). In fullSparameter_2 it will have column A and then J,K,L and M. Each FullSparameter_X will have the exact same first two sheets and then the other columns for the last two sheets will be pasted into columns A-E in dB and Phase.
found the following code which works for 1 workbook at a time. I am trying to save 7 workbooks at 1 time. Is it possible?
Sub SaveAsCell()
Dim strName As String
On Error Goto InvalidName
strName = Sheet1. Range("V77")
ActiveWorkbook.SaveAs strName
It will work on the first sheet but none after that. I need to have each workbook saved with the value in cell V77. Also if that is possible, is it possible to change where the file is saved as well?
Right now I have a master workbook that will open the 7 other workbooks, paste data onto several pages in each workbook. I would like the macro to save the workbooks. The workbooks are named: 02 Tuesday, 03 Wednesday, 04 Thursday, 05 Friday, 06 Saturday, 07 Sunday, 08 Monday.
I'm working on a Tool, where every change should be saved in a new Version. So if the user changes any number, he should click my selfcreated save-button, which takes todays date in the filename (no problem so far).
I tried to disable the "normal" save-button with:
Code:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Cancel = True
MsgBox ("saving cancelled!")
End Sub
Unfortunately this code won't allow my own button to save too. Is there any other way? Maybe sth like if "normal" saving is used, then automatically activate a makro (which is also on my button) instead of just saving?
I am trying to save my workbook in a specific directory with a specific filename and to incorporate a date field from within the spreadsheet. I have changed the format of the cell so it does not include / as i know this would not work. Saving it is the easy part but adding in the field from the spreadsheet is where im falling over.
View 2 Replies View RelatedI have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
Is there a way to add a new sheet as soon as click on button on excel sheet with the name i give.
ex : there should be a button on the Index page , as soon as i click on button it should add a new sheet and i should be able to provide a name in the index page for that sheet.
I have many workbooks that I receive from clients I run various Excel VBA macros on depending on which workbook it is, and I need to automate all of this so that anyone can run an simple .exe user interface designed in VB 2005 Express Edition where when that interface is run, a window opens on the destop with a collection of buttons, when the user clicks one of the buttons, Excel launches, loads the appropriate file and runs an already-existing appropriate Excel macro, then some file maintenance is done, like moving a group of files from one subdirectory to another.
View 9 Replies View RelatedI am using VBA to pull a web query to get sone info from an intranet site.
Unfortunately, the data it pulls is usually old. I've found the only solution is to open a browser manually and to click the Reload button on the web page then navigate back to my workbook and run it again. Then it will pull the most up to date info.
I've tried several ways of forcing a refresh of the data, but have not figured it out yet.
I have been trying the past couple of hours to use the send keys button to tab down to the button on the page I need and to hit enter, thus forcing a refresh, but I can't seem to get that to work either.
On a spreadsheet I have a button which has a macro assigned to it, for some reason when I protect the worksheet then then click the button, nothing happens (or though I do get egg timer for a second). but when I unprotect the shet its fine.
ive used this type of method many tiems, and cant see what the problem is, have tried all combination of locking and unlocking cells in and around etc, but nothign changes it.
Is there any way, through VBA code, to click a button on a sheet in another workbook. This button has a macro assigned to it. What I need to be done is this :- the workbook which has the button is open. The code should click the button on a specific sheet. On this action, the macro assigned to the button should get called.
I could just call the macro which is assigned to the button in this code. But the requirement is that the button click operation should call the macro.
I have found that one can do quite a lot with the code, but this seems to be one a whole different level. I came across a possible solution in the below mentioned link but it doesnt seem to be working for me. [URL]
I need to capture / record a cross country race results in excel. Is the a code already available to log time (per click / press enter) as the runners complete the race and capture their time...?
View 1 Replies View RelatedI have the following code:
[Code]......
Each macro is assigned to its own button, Clear and Restore. What I'm trying to do is make it so that the macro attached to the Restore button will not activiate unless the Clear macro attached to the Clear button is clicked first and visa versa. I can't see to find anthing quite like it in my research.
