I have two sheets with data. I wont excel to look for a value in colum A in sheet 2 the value to look for is defined in colum a in shet 1. If value is found it should insert in sheet one the value that is in the cell next to the found value. The data is not sorted. I have attempted and failed with using different functions.
View 1 RepliesI have a file which has in excess of 12,000 rows of data in 5 columns (sample file attached with fake data). The five rows are:
"First Name" "Last Name" "Name" (uses CONCATENATE to combine column A & B) "Email" "Date Attended"
There will be duplications in the list as people will have attended more than once over the years.
What I want to do is search through the email addresses (Column D with D1 being the header) and where there is a duplicate email address copy the cell to the right of the duplicate (F#) into the next available cell to the right of the first occurance and then delete the row with the duplicated email address.
I am on Windows 7 and Excel 2010
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
Code:
Private Sub cmdCancel_Click()
Unload Me
End Sub
[Code]....
I am after tips on creating a macro in Excel 2010 where it will search a list of folder paths in a column on a spreadsheet and insert a jpeg within the sheet from that folder if it exists. If more than one jpeg exists i would like it to insert the first jpeg only. i have found tips where it will insert images if you know the filename, however I don't have this luxury as file naming routines vary from folder to folder the only constant is that the file is a .jpg format.
View 1 Replies View RelatedI have a sheet that contains the following columns:
Invoice, Document #, Date, PO #, Part #, Part Description, Quantity, Net Amount
Based on the quantity in the row I need to copy the row, and insert it n-1 times. So if the quantity is 5, I need to copy and insert the data below the original row 4 times for a total of 5 rows of data.
I plan on firing the macro with a button as the data will change month to month.
Using Windows 7 and Excel 2010
I am using excel excel 2007 in windows 7. I have a search button that works great, however, I want it to also highlight the cell green, when it finds what I am searching for. Here is the code below for the search button I have.
Private Sub CommandButton6_Click()
Dim searchthis As String, Found As Range
Me.Unprotect Password:="123"
searchthis = InputBox("Type Number.", "Property Search")
searchthis = searchthis & "*"
Set Found = Range("A:A,e:e").Find(What:=searchthis, LookIn:=xlFormulas, LookAt:=xlWhole)
If Not Found Is Nothing Then Found.Select
Me.Protect Password:="123"
End Sub
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
I have data in cells B2:E2 and this can go down 100+ rows.
In column B i have invoice numbers but some cells contain the word "Deposit".
I have sorted this data so that the invoice numbers appear first and then all the Deposits.
I need a code to find the first instance of the word "Deposit" and to insert a row so that all the invoices and Deposits are seperated by a single row.
I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.
Can I alter it to make the comment box pop up to the left side of the cell.
[Code] ....
Is it possible to adapt this code to get me the desired results or will it have to be a separate one.
Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.
I am using excel 2007 or 2010.
I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.
I have been using a macro to search and highlight customer addresses for me, however I have changed my worksheet and now have the addresses in two columns instead of one (D for the numbers, E for street names) for sorting purposes.
What I would like to do is either; find a way to search using data from 2 cells to get a result, or have multiple results highlight and popup.
Using: Excel 2010
Code:
Sub SEARCH_FUNCTION()
Set FoundCell = Sheets("Route").Cells.find(What:=Sheets("Intro").Range("G15"), LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False)
If Not FoundCell Is Nothing Then
With FoundCell
[Code] ...........
I am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
I have created a macro that creates a powerpoint from excel in office 2010. I have followed all the required steps, like adding object library and all. but still many times the PowerPoint crashes at slide7, 8 or 9 and have to restart. I generally get the above given error.
Code:
Sub CreatePowerPoint()
Application.ScreenUpdating = False
'Macro Created by Pallavi NC (pallavi.nc@hp.com)
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'First we declare the variables we will be using
[code].....
My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.
When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.
I have a spreadsheet which has "Employee: [agent 1 name]" in column A and it may or may not have the word "Break" in the same column before it mentions "Employee: [agent 2 name]". The amount of data between agent 1 and agent 2 varies and am needing code which will insert a row above "Employee: [agent 2 name]" if "Break" is not found, and add the word "Break" in column A on the inserted row. I would need this to loop through the spreadsheet until all 100+ agents have been searched.
I'm also needing this done for the word "Meeting" and would insert a row 2 rows above the next agent.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies View RelatedI am working with Excel 2010.
There are certain .xlsm files in our system (some have macros and others don't) which generate "Error: Source not Found" in the Edit Links dialog box when the Check Status button is pushed. However, the source location is correct, as you can click on Open Source and it will open the correct file.
For simplicity of explaining my issue, consider the following scenario. In my workbook "Corn Production Summary.xls_" I link to 2 source files: "Iowa.xlsm" and "Nebraska.xlsx" (Note: The extension of the summary file doesn't matter. This error happens regardless of what the summary is.)
When I open "Corn Production Summary" I am prompted to update values. I select Update and the file refreshes and recalculates appearing to have updated all values (i.e. no error messages). However, the values from Iowa.xlsm did NOT update and there was no error message indicating that the values didn't update.
To confirm this, I go to Data>Edit Links>Check Status in "Corn Production Summary" and I see that Iowa.xlsm has the "Error: Source not Found" error. I click on Open Source and once the file is open, my data in the summary file will update.
One work around was to do the following process (with the summary file closed):
1) Iowa.xlsm and Save As Iowa.xlsx (removing macros if needed)
2) Save As Iowa.xlsx as Iowa.xlsm (overwriting the file that is currently there and readding the macros)
3) Open the summary file and both Iowa and Nebraska work just fine now.
There are a lot of files like this, and because Excel doesn't prompt us that it isn't really getting the values from these certain .xlsm files we would have to search in "Edit Links" for each file to make sure that they really are updating.
I would like (in excel 10) to highlight cells where there is NO DUPLICATE found In Columns "E" on Worksheets 1 & 2. Is that possible ?
View 7 Replies View RelatedI'm using Excel 2010. When I type 'true' or 'false' in any cell, Excel automatically changes to CAPITAL and Align Centre. I have to use the function 'lower' to change to lower case and manually to align to the left.
How to change the default setting.
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I'm getting a compile error whenever It gets to the .leftmargin line...its the "method or data member not found" compile error
With ActiveSheet.PageSetup
.PrintTitleRows = ""
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""
When I comment the margin stuff out, everything else is forrmated correctly, the landscape and all. It really doesn't that "application to inches."
I have written a macro to convert data from a report exported from Salesforce.com to a format that is acceptable for upload to our website. One of the necessary conversions is to convert values from a Boolean value to a Y/N value. I wrote a macro with a series of search-replace commands such as this:
Code:
'replace 0s and 1s in "Direct Billing" column with appropriate data
Columns("R:R").Select
Selection.Replace What:="0", Replacement:="N", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
This code generates a warning when no "0" values are found:
"Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet."
I'm on excel 2010 and I have a small group excel files I open everyday. Most of the files are static in name and location. I've got a macro created to open those files, which works fine with workbooks.open and the file path.
There are two report files I want to incorporate into my macro of workbooks to open. The files are created weekly and the files names have the following format: "Report Name (YYYY-MM-DD).xlsm". I don't want to use the file's last modified date because older files may get edited after the more recent ones are created. The files are also not always created on the same day, so the solution needs to be flexible enough to not refer to a specific day of the week or anything.
Macro open an excel file based on the latest date found in filename.
I have two workbooks, one is used for importing items to the site while the other is a monthly product list. In each of these I have a list of sku codes. I need a macro that will search each sku from the import to the entire product workbook. If it's found then delete the whole row from the product workbook. I have attached the examples below.
View 6 Replies View RelatedIs it possible to search a worksheet that may contain different number of rows (from day to day) and for every instance of a word like "HOLD" is found in column "C" to Color that intire Row Red and also Bold the Row as well?
View 9 Replies View Relatedhere is an example....
(this is on a sheet called Summary)
----A--------B --------C------- D
1Names----At Bats----Hits----Batting Average
2Tom-------38--------31------.816
3Derek------19--------14------.737
4Joey-------40--------28------.700
5Chris-------40--------27------.675
6Chuck------37--------24------.649
Using the LARGE function, Excel has created a list based on batting averages(on a separate sheet called Line-up). It looks like this.....
---A----------B
1Names----Averages
2 -----------.737
3 -----------.700
4 -----------.675
5 -----------.816
6 -----------.649
The problem I am having is figuring a way for Excel to also bring the corresponding names (after using the LARGE function to create the line up list).
I'm keen to add a field to a spreadsheet that populates a cell with the username of the last person who edited the file, as in the system or logon name, e.g. first.lastname syntax.
I would however like to keep this sheet as an .xlsx and not have it as an .xlsm. I have the code to use VBA, but is there way to grab the username without VBA to keep the .xlsx format?
I'm using Excel 2010.
I have an excel 2010 file that we export (save) to HTML so we can upload to our website.
1) Can I add a search box to the top of the page?
2) Can I freeze the row headings?
I put the "Insert new equation" button on my "Quick Access Toolbar" but it is grayed-out, as in, unavailable. The weird thing is, I also have a "Insert Equation" button on the same toolbar, clicking that opens a small menu of ready stored equations and at the bottom there is another "Insert new equation" button, that is also grayed out. However simply clicking the "Insert Equation" icon puts allows me to insert a new equation, as it should be. The same is true for the "Insert Equation" button in the "Insert" tab.
I am working on a new excel file, i.e. it is a .xlsx file with only one sheet. It worked for me before but I did a windows reinstall and now it doesn't.
Also while on that subject in Word 2010 you can put a "Insert Symbol" button on the "Quick Access Toolbar" which, when clicked, opens a small menu of recently used symbols, while its Excel counterpart directly opens the entire Symbol catalog. Any way to put a button on the Excel "Quick Access Toolbar" that behaves like its Word 2010 sibling?