I can't figure out why I can't get values in D column, sheet1. Table array is on sheet4. (Ignore Error in column E... I just cut data from paste sheet because it was too large). Also, can't figure why is so huge :-S But that's not problem right now...
View 3 Replies
Macro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
See the below columns: Column A and Column B. I would like to get all the data in column A to become column names and the data assorted under these column names vertically.
Column A Column B
0_country Canada
0_employee_type HE
0_province" AB
[Code] .........
I would like the end result to look like this
0_Country 0_employee type 0_province
Canada HE AB
USA HO CA
UK HL XY
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies View RelatedCan someone help me with this script? What I want to do is paste the next sheets data into the next empty space in (A) of the last sheet. The script works for the first paste but after that it just over pastes the next sheets data on top of what was already pasted.
View 8 Replies View RelatedI have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View RelatedCan you use VLOOKUP or a similar formula to lookup and add (or even better average) multiple data from one sheet?. For example the source sheet holds certain codes for each of our agents and I need the total of one particular code for each agent and then eventually work out the average for the day. But as the source sheet can hold 30+ agents it would be a long and tedious job to do seperate Vlookup's (especially as we are backdating the last year!).
I have attached a snapshot of the source data to try to explain what I need better.
From that source data I need to get the total/average of all the 101 codes.
on sheet 1 in cell C39 i need to find data from sheet 2 in row B that is 534 as in C32 is 11.2 and on sheet 2, 11.2 equals 534
View 2 Replies View RelatedI have 2 sheets, in sheet 1 I have the following data
@15Kmdm
@30Kmdm
@250Kmdm
@500Kmdm
@1to5Hz
@6to10Hz
@11to20Hz
@21to40Hz
In sheet 2 I have the following data
UserType
Proteomics
Application
ListSource
What I need in sheet3 is
Column A Column B
@15KmdmUserType
@30KmdmUserType
@250KmdmUserType
@500KmdmUserType
[Code] .....
If I delete any data in sheet 1 or sheet 2 it should be updated in sheet3 accordingly.
I need to be able to setup make for to take taken info say from row 2 in sheet 1 nd paste it into sheet 2 in the next blank row in 2003 version
View 3 Replies View RelatedI have a workbook with multiple sheets. Within the workbook there is 1 mastersheet and 30 other sheets. On a daily basis, I need to copy all the data from the 30 sheets to one single sheet.
For each sheet being copied, I want to copy all data with the exception of the first row. Some of the sheets may contain blank lines. I am have trouble getting my code to copy all the data.
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
View 4 Replies View RelatedI have some data in Columns A&B of Sheet2 in my workbook. I was wondering how I could make this Auto Copy & Paste into a New Sheet of my Workbook and name the new Worksheet "New Sheet". A VB Macro is what i ma currently using to generate the data.
View 9 Replies View RelatedI'm trying to write code which allows me to cut and paste arrange of data from one sheet to the next.
the critical field is MRPC column i, I need to select all data that when I apply a auto filter allows me to cut and paste from the line below the header. And repeater using the a value
>=200
Cut all cells, rows paste.
then repeat this
>=155 to 199
>=145
PlantMaterialMaterial DescriptionSLocBatchL/OBMRBulkMRPCBinTypeUnrestr.BUnOpen QtyQual.Insp.BlockedMtyp100029PCV00703AAASADDLE CLAMP COVER1000R1120018.0008.0000.0000.000#N/A#N/A
I have a "main data"Test.xlsx sheet wherein I have to populate 4 columns from 2 other sheets.
E.g.: In master data tab, I have (PID,EMP ID,Name,Address,Join Date, Exit Date). Now i am trying to get the PID & Address from another tab called "PID,Address". To get the PID & address, i will use EMP ID as reference to fetch data.
Similarly, I have to pull Join & Exit dates from the tab "Dates Sheet" with same EMP ID.
I have a home tab, wherein I have a button which is assigned a macro to reconcile the data.
I know that I can do this with simple vlookup for all the columns, but the actual data is very huge and it may vary daily. So its time consuming process. So i want to this reconciliation (consolidation) using macro. How to generate a macro.
I am attaching the sample sheet : Test.xlsm
i have created a Vlookup that pulls data from another work sheet, it all works fine apart from this one thing....
On a work sheet i have a lot of hyperlinks that work fine, but as soon as they get pulled over using a Vlookup, the name of the hyperlink comes accross for example "link 1" but you can not click on it to take you to the link like you can on the original one.
I need to take data from one sheet named "January" and paste it into another sheet named "Projections Sheet".
I want to use a checkbox to do this. So when the box is checked the data is entered into the next free row on the "Projections Sheet" starting in column B.
For example; I have data in "January" row 6, columns A through F. I need this data copied and pasted to "Projections Sheet" in the next free row (starting in row 6) and starting in column B.
Also, when I uncheck the box in January, I'd like the data removed from "Projections Sheet"
I Need to write a macro for the following example.
In sheet 1.
It has data as below
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 2
2SAM Teaching 1 2
3 SAM Teaching 1 3
4 SAM Teaching 1 1
5 SAM Teaching 1 5
I want to consolidate the data as like below and to paste it in sheet2.
HTML Code:
Sl.no Name Task week hoursworked
1 SAM Teaching 1 13
If the Name, Task and Week columns are same then macro should do sum the hours and make it into a single line as mentioned above.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Range("D3") = ActiveCell.Offset(0, 1)
SheetName = Range("D3")
ActiveCell.Offset(0, 2).Select
[Code]....
I am trying to paste data from one sheet to another using their string but not getting the logic.
below is the example for the same.
Sheet1 - data source
A
B
C
ABC
56.32
45.65
DEF
26.5
23.6
Sheet2 - Data needs to be pasted
A
B
C
DEF
23.65
36.65
XYZ
23.65
12.65
PQR
15.23
25.65
ABC
65.59
65.26
MNL
26.65
23.65
Value contains in Column B and C for ABC & DEF should replaced by the values in Sheet1
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies View Related
