VBA - Paste Data By Matching String In Other Sheet?
Aug 27, 2012
I am trying to paste data from one sheet to another using their string but not getting the logic.
below is the example for the same.
Sheet1 - data source
A
B
C
ABC
56.32
45.65
DEF
26.5
23.6
Sheet2 - Data needs to be pasted
A
B
C
DEF
23.65
36.65
XYZ
23.65
12.65
PQR
15.23
25.65
ABC
65.59
65.26
MNL
26.65
23.65
Value contains in Column B and C for ABC & DEF should replaced by the values in Sheet1
View 1 Replies
ADVERTISEMENT
Feb 8, 2014
This follows on from my previous posting [URL] ..... which produced a solution using an ActiveX Combobox that unfortunately does not work on Mac PCs!
I tried to replace the ActiveX with a Form Control Combobox but could not make it work.
So I am trying to use the alternative of "find, copy and paste" the relevant information.
As shown on the attached 140207 FINDALL test.xlsm, I need to find all records containing whatever string is entered into the "Search" cell, and copy data form three columns onto the Entry sheet.
The User will then select whichever of the entries they want to use, which will populate the relevant cells.
Problem: The following Code is not recognising any of the data in the Column being searched.
VB:
Option Explicit
Sub FINDPARTS()
Dim ws As Worksheet, i As Integer, k As Integer, z As Integer, CL, myFind, CHOICE As Range, lr As String, lrG As String,
[Code] ......
View 2 Replies
View Related
Jun 24, 2014
I have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
Attached File: Data Transfer.xlsx
View 3 Replies
View Related
Jun 11, 2013
I have two worksheets to combine. One of them have list of student numbers and their names, and the other has student number and their grades. I have to make another sheet that shows their name matched with each of their grades(grades are organized by date)
My thought process in this is to match the student numbers in two sheets, then combine name and grades and paste to another sheet.
How can I do this using VBA macro code?
View 7 Replies
View Related
May 2, 2014
how to figure it out this lookup problem (lookup using partial string of match)...
View 5 Replies
View Related
Dec 28, 2012
I'm looking for a short snippet of code to cut all rows with the string "W2 - No P.E Kit" in column E of the Raw Data tab into a tab called No kit. I don't want gaps in the rows of the Raw Data tab however.
View 4 Replies
View Related
Jul 5, 2007
i have is that i want to use data from specific work sheets in another generic sheet, i have a list of names in the generic sheet and a lot of sheets titled by peoples names, i want excel to search for a sheet whose name corrisponds to the name in a cell on the generic sheet and copy from that individuals sheet a specific cell and put it in the generic sheet.
View 11 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
May 5, 2009
Now that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies
View Related
Dec 20, 2013
I have created two sheets: "Roles to Courses" and "Datasheet". I have attached the zip db for review - its only 314k. I need to search the Datasheet in columns N, P for values from the Roles to Courses sheet (Business Role - SAP ECC) column A and find a match in the Datasheet. When a match is found, I need the B,C,D,E,F,G,H,I,J,K columns that contains the values of the classes from the Roles to Courses sht, to be added to the field called "Training Courses" in the Datasheet.
I started a macro but wasn't sure enough to complete the commands.
View 14 Replies
View Related
Sep 28, 2012
When you run the below macro from my orders.xls file it opens my template.xls file and writes data to specific locations and saves the file as the order number from my original file orders.xls. Now for single item orders which are located on the 2nd row there is no problem, but for multiple item orders which each item is on its own row it overwrites the first order because the order number is the same.
Here is the macro and in comments is an example of what I'm trying to accomplish.
Sub PackingLists4Protocol()
' Protocol flatfile ProtocolOrders.xls translated and creates files named by order number
' CSV ONLY
' Keyboard Shortcut: Ctrl+P
[Code].....
View 7 Replies
View Related
Jan 17, 2014
I'm not sure if this is best handled in the Formulas & Functions section or elsewhere, but this is my best guess. I have a spreadsheet used for tracking hardware issues with data in two worksheets:
1. PageCount
Column 1: Date
Column 2: Serial#
Column 3: PageCount
2. Tickets
Column 1: Date
Column 2: Serial#
Column 3: TicketNumber
What I'm trying to do is find a way to extract from those two sheets the date, serial number, page count, and ticket number where the date / serial # are the same and dump this to a new sheet. I've thought that I may need to concatenate the date / serial number together into a single cell or something, but I'm really at a loss as to how to pull this data. Part of me thinks this should be done in SQL, not a spreadsheet, but that's how our reports are produced.
View 1 Replies
View Related
Feb 7, 2014
I have a DATA sheet that is all of the information reported on a monthly basis. This format will never change, but the data will. I have a second sheet called MMUSAGE.
On the MMUSAGE tab, I have identified which headers (in red) from the DATA tab that correspond with the headers in the MMUSAGE tab. Question is: how do I move the data from the DATA tab over to the MMUSAGE tab under the appropriate headers?
Example: IF Product Number on Worksheet(DATA) = Product Code on Worksheet(MMUSAGE) then move all data to Column L.
View 4 Replies
View Related
May 9, 2014
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
View 1 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
May 14, 2014
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available)
orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet
If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
View 5 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Mar 27, 2014
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies
View Related
Dec 12, 2008
Can someone help me with this script? What I want to do is paste the next sheets data into the next empty space in (A) of the last sheet. The script works for the first paste but after that it just over pastes the next sheets data on top of what was already pasted.
View 8 Replies
View Related
Jan 20, 2013
My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.
When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.
I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).
for example:
p1
data
data
data
data
p2
data
data
data
data
[Code] .....
needs to become:
p1
data
data
data
data
[Code] .....
I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).
View 5 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Jun 26, 2014
I thought I would get this on my own, but I digress.
I received sample code to populate a listbox from tab names of a workbook, yay!
What I have attempted is to use a user form, enter a string in a textbox and if it match's any string in the list box, then highlight.
Basically, its a simple search engine.
View 4 Replies
View Related
Jun 19, 2014
I have a large sheet of data I'm trying to sort through. Each row of data has a column that contains a long string description. Each of these strings contains a three letter codes in all caps that I want to be able to pull out. I have a seperate sheet that has all of the possible three letter codes in one column. Is there a formula that can compare each string of text to this list of three letter codes and if it find a match put that code in a column on the original sheet?
Doc Number
String
Code
33333
This is an example string of text. An example three letter code would be HCB. The location of the code within the string varies.
HCB
33332
This is an example string of text. An example three letter code would be CDQ. The location of the code within the string varies.
CDQ
33331
This is an example string of text. An example three letter code would be RCA. The location of the code within the string varies.
RCA
Codes
DCP
HCB
RCA
CDQ
LCP
DCA
SCR
View 2 Replies
View Related
Feb 3, 2014
I have 2 sheets, in sheet 1 I have the following data
@15Kmdm
@30Kmdm
@250Kmdm
@500Kmdm
@1to5Hz
@6to10Hz
@11to20Hz
@21to40Hz
In sheet 2 I have the following data
UserType
Proteomics
Application
ListSource
What I need in sheet3 is
Column A Column B
@15KmdmUserType
@30KmdmUserType
@250KmdmUserType
@500KmdmUserType
[Code] .....
If I delete any data in sheet 1 or sheet 2 it should be updated in sheet3 accordingly.
View 2 Replies
View Related
Feb 24, 2014
I need to be able to setup make for to take taken info say from row 2 in sheet 1 nd paste it into sheet 2 in the next blank row in 2003 version
View 3 Replies
View Related
