Find Data Copy / Paste Each Value Into Different Sheet
Feb 21, 2012
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
Looking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd. Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a workbook with multiple sheets. Within the workbook there is 1 mastersheet and 30 other sheets. On a daily basis, I need to copy all the data from the 30 sheets to one single sheet.
For each sheet being copied, I want to copy all data with the exception of the first row. Some of the sheets may contain blank lines. I am have trouble getting my code to copy all the data.
I have some data in Columns A&B of Sheet2 in my workbook. I was wondering how I could make this Auto Copy & Paste into a New Sheet of my Workbook and name the new Worksheet "New Sheet". A VB Macro is what i ma currently using to generate the data.
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I need to take data from one sheet named "January" and paste it into another sheet named "Projections Sheet".
I want to use a checkbox to do this. So when the box is checked the data is entered into the next free row on the "Projections Sheet" starting in column B.
For example; I have data in "January" row 6, columns A through F. I need this data copied and pasted to "Projections Sheet" in the next free row (starting in row 6) and starting in column B.
Also, when I uncheck the box in January, I'd like the data removed from "Projections Sheet"
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
I have a sheet in which you enter in new information. I need a macro to copy that information onto another sheet, onto the first empty row, so it does not clear the information that has already been entered. The first sheet is an information entry sheet, and the second is the database, which contains all of the information. I hope this is clear, if you do not understand, I will be happy to rephrase my question!
I have included two screenshots of the excel system. They are named.
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
