I am trying to search in a new workbook called RepricingFactors. The worksheet within that workbook is called Network Differences. I am searching for the city Louisville out of about 100 cities. Do I have this set up correctly???
Application.WorksheetFunction.VLookup("Louisville", Application.Workbooks("RepricingFactors.xls").Worksheets("Network Differences"). Range("A1:D40"), false)[code]
I have a range called List that has 3 columns of data:
Corporate Human Resources Services PMA
Corporate Procurement Director
Ops Central Customer Services Lost Property Office
Ops Travel Information Travel Info Call Ctr
Ops Travel Information Centres Travel Info Centres
I have 3 columns on the entry sheet called Business Unit (Col A), Department(Col B) and Sub-Department (Col C). I want to limit the choice in column B to based on the selection in Column A in the form of a drop-down list e.g choosing Corporate gives a list of Human Resources Services; Procurement.
I am using the list option for field validation and the following formula in cell B2: =INDIRECT(VLOOKUP(A2,List,2,0)). I'm not sure what I'm doing wrong as I don't get a list of options just a blank cell. Do I need to use a different formula other than VLOOKUP..?
I have a procedure that opens workbooks from a list and then searchs for a phrase given by user. If nothing is found it closes workbook and opens next one. If phrase is found it highlights it on workbook. I wanted to give user some options when phrase is found: to search further in next workbook and to search further, but leaving current workbook open. Here my misery starts.
The only way i made up to perform it was to use Userform and code: userform.ActiveControl.Name. But it seems that Userform called in other workbook than one where the module is, interrupts somehow the procedure. When workbook, where the userform was used, closes the procedure doesn't go on. Evidently Userform is the issue here as without it, macro works.
See my code below :
[Code] .........
I need "PC" to show up if I type a sentence containing "Called Parent", "Called Dad", or "Called Mon". Here is what I'm trying.
View 2 Replies View RelatedWhat i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro
Public Sub FindText()
'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
If myText = "" Then Exit Sub...................
I have 2 workbooks. 1 is where data is entered called wksPB, the other is like a database workbook. The wksPB has data to be feed from column B to F and there is a dropdown.
what im looking to do is, if the combobox value is selected as Decline then it should display a messagebox that reference value in cell B is denied. if combobox value is Agreed then the macro should search the database workbook for the text entered in column b of wksPB and then copy data of C:E of wksPB to H:J of database sheet where that text is found and also the approver name in wksPB C24 to the approver cell of where that text was found. I've reached till finding the text but what I get my head twiting on is how to copy the text from wksPB column B:F to database sheet column H:K. Im attaching the sample workbooks and the code where ive reached till.
[Code] .....
Attached Files
Replacement Records - 2014.xlsx
forum file.xlsm
what VBA is required to have a combo box in a userform look up data in a different workbook, then populate that data into the drop down list of that combo box for a user to select.
I have managed to successfully create a vlookup for a combo box in a userform that looks up data in a named range in another worksheet within the same workbook and then populate that data into a field in a worksheet within the same workbook. However, I want to change this so the combo box on a userform (in one workbook) will look up data from a named range in a second workbook without opening the second workbook. At the moment, the code I have that will 'submit' the user selected data from the combo box drop down list works.
The code that has worked so far to vlookup data for the combo box from a worksheet within the same workbook is:
Code:
Private Sub UserForm_Initialize()
Dim pName As Range
Dim ws As WorksheetSet ws = Worksheets("vlookupsheet")
For Each pName In ws.Range("ProjectName")
With Me.cboProjectName
.AddItem pName.Value
End WithNext pName
Me.cboProjectName.SetFocus
End Sub
Do I need specify the file path of the second workbook that will contain the data for the combo box as well as the name of the worksheet and named range in that second workbook?
I have spent the last week searching this forum to find the solutions to my various problems, I'm in mental meltdown
I don't think that I can explain here what it is I need so I have attached a sample workbook/spreadsheets.
I have NO experience of Excel and have had a little help developing the attachment, my assistant has now gone AWOL
I am working on a spread sheet that searches for an employee's clock number, pulls the data from a particular week and displays it all on one page. I have 6 different tables of different stats, 4 weeks each and I would like to pull all of this data together. I have successfully created a page that when you plug in an employee's number, all of thier stats apear from all 6 data sets for the last 4 weeks. I do this by using ....
View 9 Replies View Relatedpicture this.
Cell A1 = xyz3
Cell B1 = 5
Cell C1 = xyz3-hgfe-56f
I need to do a vlookup on C1 in range A1:B1 that will return B1 if C1 contains the string in A1. I've tried using the TRUE variable in the vlookup formula which does not require an exact match. This works for about 80% of my data but is not 100% accurate. Of course I've got a long list of data ... not just the 3 cells.
I have a few tables on a worksheet, and to search these tables i am using a VLOOKUP, however i want to be able to search for other than just the one field! but still pull up all of the data. If i were to do the same tables in access i would be able to query all fields and then recieve an output of those that match, is there any way to do this in excel
Note I am only into basic VB. Other question i have is, on a VLOOKUP you only return the one record, is there anyway of searching a table of data and returning all records that hold that value in a specific field, like applying a filter to them. or am i just being extrememly dumb and missing something simple?
The attached wb will be used to schedule 10 machines. I have a dispatch ws that will have the machine # in column A, job/lot/ assy in column B, and load hrs in column C. there is a ws for each machine number. I want the worksheets for each machine to look in the dispatch ws, and return the info from B and C that has it's number in A for every occurence, currently it will return the 1st occurrence only.
Schedule.xls
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
I have a lookup table (see attached file) which holds the min & max value for a vehicle, the min & max size of the engine and the premium. I want a function that will search for the value of the vehicle (e.g. 100000 in cell H5) within the min value and max value columns as well as the engine size (e.g. 2000 in cell H6) in the min size & max size columns return the premium from the associated premium (which should be 13,200).
View 2 Replies View RelatedI get new worksheets on a regular basis which are of the same format (same columns with headers) and I have to perform both vlookups and sumifs on them. Their are about 12 different tabs I perform the vlookup on based a vendor name in A2 and its corresponding tab. I am tired of typing the same thing over and over again.
What I'd like to write is a Control Panel with all the equations so I can just copy/paste them in when I get a new sheet.
How can I write a vlookup which would search for the value which is one cell to the right of where I put the formula in?
Similar to:
=vlookup(current cell over one, 'vendor1sheet'!A:C,3,0).
I would then want to copy it down the worksheet. Currently type in column E everytime I get a new sheet:
=VLOOKUP(F2,'Vendor1'!A:C,3,0)
The catch
Column A has the vendor name, there are about 12 vendors, each with a different tab with related data which I am searching through.
Ultimately, I'd like to have an equation that would do the vlookup (and sumif) as described above and also use the vendor name in column A to look on a particular tab.
Something like:
=vlookup(one cell to the right,'VendorTabFromVendorNameInColumnA'!A:C,3,0)
I was going to use nested if statements on a control panel sheet with a column for the vendor name and a column for the vlookupformula and than paste a single formula all the way down column E:
In column E, every row:
If(A2=vendor1, 'controlpanel'!vendor1equation), if(A2=vendor2, 'controlpanel'!vendor2equation), etc.
Again, the vlookups would all check for one cell to the right of where this nested if statement was (located in column E, looking in F).
1. can i limit vlookup on sheet2 to search only a certain range of cells on a sheet1.
example, I want vlookup to look in sheet1, colum A - Y but only look between rows 1 and 100
2. If 1 can be done, and i happen to add a row in worksheet1 (making it 101 rows vice 100) will the vlookup code on sheet2 include that 101st row or do i have to redo the range manualy.
I have an XLS sheet filled with every zip code in the US... the zips are in multiple columns adjacent to columns with the corresponding county names.
Unfortunately, the there are up to EIGHTEEN columns of zip codes in each row describing the counties... not one zip per row. I'm assuming this was done to save space.
In another sheet, I have list of client zip codes and need to VLOOKUP the corresponding county from the first sheet. I'm certain I'm not using VLOOKUP right...I'm getting #N/A every time.
Is this because it's only checking the first column of zip codes? I need it to check all 18 columns of course... there are no repeated zips.
How do I do this without rebuilding the full zip database page?
I want to use vlookup up function to search for a specific data set. when it finds it i want it to look 2 columns over and add the value then continue to search for the specific data set again in the range provided in the vlookup, when it finds another matching the criteria look 2 columns over and add that cell value to the previous count.
keep a running total until it has looked through the whole sheet. here is an example of the vlookup i am using, it is not suming because thats where im stuck. also a quick data set to picture what i am talking about. In the data set in plain terms i want to look for the line name and add the qty on that line into a chart.
=IF(ISNA(VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE)) = TRUE, 0, VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE))
LineOrder_NumQTY
7L58545487320
7L5856060351
Z_56784817515
Z_56784824115
Z_57454577222
Z_57454562424
Z_57454547524......................
In the attached sheet I am trying to use the formula below but am getting a #NA error. I have narrowed the problem down to the use of the SEARCH and LEFT functions that I am using to determine the lookup value of the VLOOKUP formula.
what I am doing wrong? If I substitute the SEARCH and LEFT function with the number "14" it works just fine. You can find examples of both in cells B29 and C29 on the rename tab.
I have a sheet with Names in it. I need to look those names up and find which org they belong to. The problem is the the names have many characters after them, and many names belong to a few orgs, with a the rest belonging to many orgs. (See below)
I have been trying to get a Vlookup to work, but since it can't go left, it won't look up the orgs that don't own at least three names. And I can't get the search to work on the names.
Names:
WSGHG1-8410YFH
WSSMXG-8401B8T
NBSMXG-0310V6R
NBXG-0310V6V
[code]....
I have a column of text strings in a2.a??? this is my data. Each text string has a persons name somewhere in it with other text around it.
In column c2.c??? i have text names of people names im searching for. eg. bob,jane,harry
what would be a pratical use of the vlookup function to return the name in column b2.b??? if the name from C was located in the string in A this is a non case sensertive requirement.
what i am trying to do is use concatenate in a vlookup to search for a resource number and date, then return another column in the array.
the formula looks like:
=VLOOKUP(CONCATENATE(D7,$H$6),Roster_Allocation,7,FALSE)
but only results in NA.
if i search for the resource number only, i get the correct result.
also, the res# and date are concatenated in the table array. could this be related to the way excel is storing the dates (40241?) even though both concatenated fields look the same?
i have also tried adding a new coumn which has the res# and dates concatenated as the lookup value but still all NA.
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I WANT it to search all of column A for the highest number in the range (which will change daily to a new high number above the highest currently), and return the value in column 4 (column D) that corresponds to that value from column A. This is what I have, but it is not working, it is giving me the number (1) in Cell A800 (which is the lowest valued number in my range. The numbers range in value from 1 to 762 with none repeating (they are sequential). The formula I have is :
=+VLOOKUP(MAX(A76:A2000),A76:I2000,4)
Attached is the mock excel spreadsheet. I want to read "sam" from the lookup column's long text "sam is good" and then write "4" in the next column. Similarly read "white" from the long text "white is tired" and write "1". And so on,,,,, For more criteria, see box highlighted in yellow,,,,I used VLOOKUP but what am able to make it work only when there is one word "sam" in the lookup column. It returns #NA when the text is "sam is good". It should write nothing if none of the criteria is met and should keep doing until the last cell in the lookup column.
View 3 Replies View RelatedWould like to be able to use a vlookup formula that incorporates multiple search criteria. In C10, I have a specific rank listed. In C11, I have the supervisor listed. The formula needs to list the name of the agent in C12 based on the criteria in C10 and C11.
agent rank score supervisor
A B C D
1 leo 1 99 jim
2 bob 3 68 jim
3 sam 1 73 ann
4 tim 2 84 adam
5 alf 2 55 ann
6 dan 3 42 adam
7 will 2 79 jim
8 sara 1 91 adam
9
10 Rank: 1
11 Supervisor: adam
12 Agent: " "
I'm looking for a formula to search for a value in the SECOND (instead of first) column of a table array and return a value in the same row from FIRST (instead of the same or another) column in the table array. Formula would be searching for the unique production order number in the column B and return production line id from the column A.
A1 production line_id
B1 poduction_order_number
A2 L1
A3 L2
A4 L1
B2 505212
B3 504234
B4 505663
I was trying vlookup(504234;B2:A4;2;0) to make formula go search from right columns to the left but then excel is switching the search table to A2:B4 and gives #N/D!
One remark-there is no possibility to switch these 2 columns to simplify. I have to leave them as they are.
I am trying to develop my workbook design for my employers.So far i have already added a search function using a command button and text box to each worksheet and a toggle button to find and hide/show rows users dont need automatically with great success.
Here is the code i have adapted so far. Its not working correctly and i cant seem to figure it out. The command button and textbox will sit on the first worksheet and needs to search for a name (example: John) in the workbook and either display which sheet the name is found on or jump in turn to each name until you reach the correct sheet.
Do i need to set a range for the variable (ws)?
Private Sub CommandButton1_Click()
Dim search As String
Dim ws As Worksheet
Dim Answer As String
search = TextBox1.Text
On Error GoTo ErrorMessage
Application.EnableEvents = True
[code].....