I am working on a spread sheet that searches for an employee's clock number, pulls the data from a particular week and displays it all on one page. I have 6 different tables of different stats, 4 weeks each and I would like to pull all of this data together. I have successfully created a page that when you plug in an employee's number, all of thier stats apear from all 6 data sets for the last 4 weeks. I do this by using ....
View 9 RepliesI want to use vlookup up function to search for a specific data set. when it finds it i want it to look 2 columns over and add the value then continue to search for the specific data set again in the range provided in the vlookup, when it finds another matching the criteria look 2 columns over and add that cell value to the previous count.
keep a running total until it has looked through the whole sheet. here is an example of the vlookup i am using, it is not suming because thats where im stuck. also a quick data set to picture what i am talking about. In the data set in plain terms i want to look for the line name and add the qty on that line into a chart.
=IF(ISNA(VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE)) = TRUE, 0, VLOOKUP(A8, 'Web Queries'!G$3:H$40, 2, FALSE))
LineOrder_NumQTY
7L58545487320
7L5856060351
Z_56784817515
Z_56784824115
Z_57454577222
Z_57454562424
Z_57454547524......................
What i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.
I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.
I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).
Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)
I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.
I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.
Here is the source data:
Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT
Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT
I have spent the last week searching this forum to find the solutions to my various problems, I'm in mental meltdown
I don't think that I can explain here what it is I need so I have attached a sample workbook/spreadsheets.
I have NO experience of Excel and have had a little help developing the attachment, my assistant has now gone AWOL
picture this.
Cell A1 = xyz3
Cell B1 = 5
Cell C1 = xyz3-hgfe-56f
I need to do a vlookup on C1 in range A1:B1 that will return B1 if C1 contains the string in A1. I've tried using the TRUE variable in the vlookup formula which does not require an exact match. This works for about 80% of my data but is not 100% accurate. Of course I've got a long list of data ... not just the 3 cells.
I have a few tables on a worksheet, and to search these tables i am using a VLOOKUP, however i want to be able to search for other than just the one field! but still pull up all of the data. If i were to do the same tables in access i would be able to query all fields and then recieve an output of those that match, is there any way to do this in excel
Note I am only into basic VB. Other question i have is, on a VLOOKUP you only return the one record, is there anyway of searching a table of data and returning all records that hold that value in a specific field, like applying a filter to them. or am i just being extrememly dumb and missing something simple?
The attached wb will be used to schedule 10 machines. I have a dispatch ws that will have the machine # in column A, job/lot/ assy in column B, and load hrs in column C. there is a ws for each machine number. I want the worksheets for each machine to look in the dispatch ws, and return the info from B and C that has it's number in A for every occurence, currently it will return the 1st occurrence only.
Schedule.xls
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
I have a lookup table (see attached file) which holds the min & max value for a vehicle, the min & max size of the engine and the premium. I want a function that will search for the value of the vehicle (e.g. 100000 in cell H5) within the min value and max value columns as well as the engine size (e.g. 2000 in cell H6) in the min size & max size columns return the premium from the associated premium (which should be 13,200).
View 2 Replies View RelatedI get new worksheets on a regular basis which are of the same format (same columns with headers) and I have to perform both vlookups and sumifs on them. Their are about 12 different tabs I perform the vlookup on based a vendor name in A2 and its corresponding tab. I am tired of typing the same thing over and over again.
What I'd like to write is a Control Panel with all the equations so I can just copy/paste them in when I get a new sheet.
How can I write a vlookup which would search for the value which is one cell to the right of where I put the formula in?
Similar to:
=vlookup(current cell over one, 'vendor1sheet'!A:C,3,0).
I would then want to copy it down the worksheet. Currently type in column E everytime I get a new sheet:
=VLOOKUP(F2,'Vendor1'!A:C,3,0)
The catch
Column A has the vendor name, there are about 12 vendors, each with a different tab with related data which I am searching through.
Ultimately, I'd like to have an equation that would do the vlookup (and sumif) as described above and also use the vendor name in column A to look on a particular tab.
Something like:
=vlookup(one cell to the right,'VendorTabFromVendorNameInColumnA'!A:C,3,0)
I was going to use nested if statements on a control panel sheet with a column for the vendor name and a column for the vlookupformula and than paste a single formula all the way down column E:
In column E, every row:
If(A2=vendor1, 'controlpanel'!vendor1equation), if(A2=vendor2, 'controlpanel'!vendor2equation), etc.
Again, the vlookups would all check for one cell to the right of where this nested if statement was (located in column E, looking in F).
1. can i limit vlookup on sheet2 to search only a certain range of cells on a sheet1.
example, I want vlookup to look in sheet1, colum A - Y but only look between rows 1 and 100
2. If 1 can be done, and i happen to add a row in worksheet1 (making it 101 rows vice 100) will the vlookup code on sheet2 include that 101st row or do i have to redo the range manualy.
I have an XLS sheet filled with every zip code in the US... the zips are in multiple columns adjacent to columns with the corresponding county names.
Unfortunately, the there are up to EIGHTEEN columns of zip codes in each row describing the counties... not one zip per row. I'm assuming this was done to save space.
In another sheet, I have list of client zip codes and need to VLOOKUP the corresponding county from the first sheet. I'm certain I'm not using VLOOKUP right...I'm getting #N/A every time.
Is this because it's only checking the first column of zip codes? I need it to check all 18 columns of course... there are no repeated zips.
How do I do this without rebuilding the full zip database page?
In the attached sheet I am trying to use the formula below but am getting a #NA error. I have narrowed the problem down to the use of the SEARCH and LEFT functions that I am using to determine the lookup value of the VLOOKUP formula.
what I am doing wrong? If I substitute the SEARCH and LEFT function with the number "14" it works just fine. You can find examples of both in cells B29 and C29 on the rename tab.
I have a sheet with Names in it. I need to look those names up and find which org they belong to. The problem is the the names have many characters after them, and many names belong to a few orgs, with a the rest belonging to many orgs. (See below)
I have been trying to get a Vlookup to work, but since it can't go left, it won't look up the orgs that don't own at least three names. And I can't get the search to work on the names.
Names:
WSGHG1-8410YFH
WSSMXG-8401B8T
NBSMXG-0310V6R
NBXG-0310V6V
[code]....
I have a column of text strings in a2.a??? this is my data. Each text string has a persons name somewhere in it with other text around it.
In column c2.c??? i have text names of people names im searching for. eg. bob,jane,harry
what would be a pratical use of the vlookup function to return the name in column b2.b??? if the name from C was located in the string in A this is a non case sensertive requirement.
what i am trying to do is use concatenate in a vlookup to search for a resource number and date, then return another column in the array.
the formula looks like:
=VLOOKUP(CONCATENATE(D7,$H$6),Roster_Allocation,7,FALSE)
but only results in NA.
if i search for the resource number only, i get the correct result.
also, the res# and date are concatenated in the table array. could this be related to the way excel is storing the dates (40241?) even though both concatenated fields look the same?
i have also tried adding a new coumn which has the res# and dates concatenated as the lookup value but still all NA.
I am trying to search in a new workbook called RepricingFactors. The worksheet within that workbook is called Network Differences. I am searching for the city Louisville out of about 100 cities. Do I have this set up correctly???
Application.WorksheetFunction.VLookup("Louisville", Application.Workbooks("RepricingFactors.xls").Worksheets("Network Differences"). Range("A1:D40"), false)[code]
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I WANT it to search all of column A for the highest number in the range (which will change daily to a new high number above the highest currently), and return the value in column 4 (column D) that corresponds to that value from column A. This is what I have, but it is not working, it is giving me the number (1) in Cell A800 (which is the lowest valued number in my range. The numbers range in value from 1 to 762 with none repeating (they are sequential). The formula I have is :
=+VLOOKUP(MAX(A76:A2000),A76:I2000,4)
Attached is the mock excel spreadsheet. I want to read "sam" from the lookup column's long text "sam is good" and then write "4" in the next column. Similarly read "white" from the long text "white is tired" and write "1". And so on,,,,, For more criteria, see box highlighted in yellow,,,,I used VLOOKUP but what am able to make it work only when there is one word "sam" in the lookup column. It returns #NA when the text is "sam is good". It should write nothing if none of the criteria is met and should keep doing until the last cell in the lookup column.
View 3 Replies View RelatedWould like to be able to use a vlookup formula that incorporates multiple search criteria. In C10, I have a specific rank listed. In C11, I have the supervisor listed. The formula needs to list the name of the agent in C12 based on the criteria in C10 and C11.
agent rank score supervisor
A B C D
1 leo 1 99 jim
2 bob 3 68 jim
3 sam 1 73 ann
4 tim 2 84 adam
5 alf 2 55 ann
6 dan 3 42 adam
7 will 2 79 jim
8 sara 1 91 adam
9
10 Rank: 1
11 Supervisor: adam
12 Agent: " "
I'm looking for a formula to search for a value in the SECOND (instead of first) column of a table array and return a value in the same row from FIRST (instead of the same or another) column in the table array. Formula would be searching for the unique production order number in the column B and return production line id from the column A.
A1 production line_id
B1 poduction_order_number
A2 L1
A3 L2
A4 L1
B2 505212
B3 504234
B4 505663
I was trying vlookup(504234;B2:A4;2;0) to make formula go search from right columns to the left but then excel is switching the search table to A2:B4 and gives #N/D!
One remark-there is no possibility to switch these 2 columns to simplify. I have to leave them as they are.
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)
I need to create two formulas:
1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.
2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.
i want to put a subject for a negative values, how should i do it?
For example:
lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent
is it possible to do this? ALternatively see the (new) attachment for clearer question.
Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
I am trying to do a vlookup function of 2 values but the key lookup column is an approximation.
I have attached a sample data file. Essentially, on Sheet 1 Column M (labeled as EPS), I want to do a vlookup of both Column A and B, and copy the values in Sheet 2 Column K into Column M. The approximate value comes from Column B, the date, as Sheet 1 has all the dates from 2001 and 2008 while Sheet 2 only has 4 dates per year. On sheet 2, the first 2 dates are 10/30/2001 and 2/5/2002. I want the EPS value for 10/30/2001 to stand for all values between 10/30/2001 and 2/5/2002.
The Vlookup function with a True value for the last criterion can do this for a vlookup of 1 variable, but it doesn't work for 2.
I need a formula that matches a number on Sheet1 with a number on Sheet2. Sheet1 contains 7 columns of numbers. Each column corresponds with the same column on Sheet2 if the number on Sheet1 column 1 can be found in Sheet2 column 1 then the result is True. If the number is not found in Sheet2 column 1 then the result is False. This same criteria would apply to columns 2 through 7 as well.
The formula would start by selecting a number in Sheet1 that corresponds with the formula column and then scan the entirety of the matching column on Sheet2 for that number. If it is found in that column the result is TRUE.
Sheet1 H3 corresponds to Sheet1 A3 scans all of Sheet2 column B for the value in A3 if it's in Sheet2 column B the result in H3 is True if it's not then the result in H3 is False.
EXAMPLES:
Sheet1: column heading 1 - (A3) = 2223333333
Sheet2: column heading 1A - (B72) = 2223333333
Result H3 = TRUE
Sheet1: column heading 1 - (B3) = 222333333314
Sheet2: column heading 1A - (C67) = 222333333314
Result I3 = TRUE
Sheet1: column heading 1 - (C3) = 222333333332
Sheet2: column heading 1A - (D61) = 222333333332
Result J3 = TRUE
Sheet1: column heading 1 - (D3) = 222333333321
Sheet2: column heading 1A - (E62) = 222333333321
Result K3 = TRUE
Sheet1: column heading 1 - (E3) = 222333333331
Sheet2: column heading 1A - (F65) = 222333333331
Result L3 = TRUE
Sheet1: column heading 1 - (F3) = 222333333351
Sheet2: column heading 1A - (G70) = 222333333351
Result M3 = TRUE
Sheet1: column heading 1 - (G3) = 222333333352
Sheet2: column heading 1A - (H69) = 222333333352
Result N3 = TRUE
I've attached a workbook with examples : match_numbers.xlsx‎