Custom Error Bars On Bar Charts
Apr 24, 2009
I created a bar chart with horizontal (category) labels: winter, spring, summer, fall. Y-axis label is percent. For each category there is data for blk rats, Norway rats, Mice. For each species and category the standard error is different because it is based on several years of data for a given season.
When I try to display the std. error (using custom, fixed value) it treats each species as a series and only lets me choose one value. in other words the std. error would be the same for blk rats in winter, spring, etc. How can I use the individual values?
View 4 Replies
ADVERTISEMENT
Jul 5, 2006
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
View 9 Replies
View Related
Dec 23, 2013
In the attached document is a timeline made from a scatter chart. Error bars using custom values are used to show the length of each task, however I can't get the chart to include error bars for the last 2 data points (tasks).
View 1 Replies
View Related
Nov 26, 2007
I have a list of salesmen and their performance to date (on a percentage basis) which is sorted lowest percentage down to highest. What I would like to do is to graph this as a bar graph (no problem there) but for the bars to be replaced by the names themselves! So, I have data like this:........
View 3 Replies
View Related
Aug 29, 2006
I have created an excel file that contains a lot of worksheets which contain a lot of raw data and charts. There are 5 different tabs for 5 different companies. Each tab currently contains only 1 year of raw data for that company. Then I have another excel worksheet that has nothing but charts on it. Each chart is a bar chart that shows each of the 5 companies. It also shows the current rate for the month for each company and the 12 month average for each company. On the chart there are also 3 lines. There is a standard line that we try to meet each month. There is also a line for the upper control limit and a line for the lower control limit. Here is my problem:
The 2 bar charts (current rate for the month & the 12 month average) are created and updated by the raw data in each of the 5 data sheets.
Based upon the values in each of the cells that create and update the bars on the charts themselves:
I want the bars to be RED if the values are below the lower control limit.
And I want the bars to be GOLD if the values are above the upper control limit.
And I want the bars to be green if the values are in between the upper and lower control limits.
View 2 Replies
View Related
Mar 19, 2014
I've just started with VBA coding and I'm absolutely stuck with one problem I have had for weeks!
I litterally spent days looking for an answer on google, unsuccessfully of course. So here I am
Right, so the problem is the following:
I have series of bar charts (up to 10) with some relationships between them, and I want to highlight those.
Here is a screenshot:
or here: View image: Untitled
I know how to move the shapes automatically, etc. Yet, the big issue I'm encountering is that I can't find a way to get the position of the circled points!
I tried every possible way with GET.CHART.ITEM but the best I get is the top of the bar and not the points inside of it...
View 6 Replies
View Related
Jan 27, 2012
Using Excel 2007. Is there a straightforward way to do a waterfall chart?
eg. stacked bars running from left to right.
First Column = 2011 Headcount
2nd Column = stacked bar with additions (by category) - stepping up from the 2011 total.
3rd Column = stacked bar with reductions (by category) - steppind down from the first column + 2nd colum total.
4th column = 2011 exit (which will be at the same height as the bottom of the 3rd column).
View 3 Replies
View Related
Oct 29, 2012
how to control either the X or Y axis error bars for a scatter chart.
I'm building something like a gantt chart and I only want to use the X axis error bars and delete the Y axis bars. I've been able to add error bars by using "ActiveChart.SeriesCollection(1).HasErrorBars = True" but when i select the error bars using "ActiveChart.SeriesCollection(1).ErrorBars.Select" the Y axis (Vertical Error Bars) are automatically selected and any formatting I apply is added to the Y axis and left off of the X axis.
Does anyone know how to delete the Y axis error bars and/or choose only the X axis error bars?
View 5 Replies
View Related
Apr 24, 2014
I need to create some vertical scatter plots ie where all the y values are in the same line, and also to put on the mean and standard deviation error bars, like the example I found below. I have managed to plot the scatter by giving all the y values in each group the same x value, but I don't know how to proceed.
View 4 Replies
View Related
Jan 3, 2013
I have a series of data and want to create a chart looking like this
Google Image Result for [URL] ...
Where it shows min/max on the error bars, quartile 1/3 on the box and median as a scatter plot. My data is a simple table
Group
Amount F
Amount M
Median F
Median M
Median F+M
[Code] ....
Here F = Female, M=Male and the chart should show all calculation for both gender together (I have another thread up where the gender are separated with the Title (How to create a stock column chart with error bars?? (Both gender separated))
View 1 Replies
View Related
Apr 30, 2014
I have some excel sheets that are formatted like the following:
COMPANY | TOTAL | RGB
company1 | 10 | 255,000,000
company2 | 20 | 000,255,000
company3 | 30 | 000,000,255
...
My question is that I would like to have a macro that runs on this basic file and creates a bar graph with the data. Then it utilizes the RGB values in the column to change the specific bar for that row.
View 8 Replies
View Related
Jul 6, 2009
In the code below using msoBarTop places the menubar at the top but it seems to just place it in a new row at the right of all menus.
How or can I dock the menubar next to the last menubar?
View 7 Replies
View Related
Mar 6, 2009
I am trying to derive the EMI for a Loan Amount and also chart a PIE graph for the same..
Instead of Manually feeding the values such as :
Variable 1 : Loan Amount : Min : Rs 50,000/- Max :Rs 5000000/-
Each Spin (1 Unit) -Rs 25000/-
Variable 2 : Interest Rate : Min : 5% Max : 30%
Each Spin (1 Unit) -0.25%
Variable 3 : Tenure/Duration : Min : 6 months Max : 30 years
Each Spin (1 Unit) - 6 months
I want to have a Scroll-Bar where the values can change Automatically but am not aware of using the same...
Can someone please help me with a small attachment with the above variables attached to it..The values drawn should be displayed as well above the Scroll-Bar and maybe can make the Min and Max more dynamic by storing it somewhere in the Sheet..
I am looking for Non-VBA solution to do the same..
View 12 Replies
View Related
Jan 13, 2007
In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies
View Related
Oct 14, 2004
I have an Excel application which attempts to convert charts to gif images,
using the code (ChartPath is equal to a valid directory location):
ActiveChart.Export Filename:=ChartPath, FilterName:="GIF"
This works perfectly on one PC, but fails when I try to run it on a
different PC. Both PC's use Windows 2000, and both run Excel 2000.
The error message I get on the second PC is:
Run-time error '1004':
Method 'Export' of object ' _Chart' failed
What I need to find out is what could possibly be causing this statement to
fail. Is there something in the Excel or Windows settings that could be
different (a dll file etc)?
View 9 Replies
View Related
Sep 14, 2006
I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'
View 9 Replies
View Related
Jan 23, 2007
I have the following extract of code which is meant to add a chart. However, it adds a pivotchart and then errors on the last line because it can't change the source data on a pivotchart like it can on a non-pivotchart. All of the other charts in the workbook are pivotcharts. It was working fine last week.
Sheets "LOI Sheet" and "Data for Charts" exist.
"e" is a defined integer with value 53 at last running.
Charts.Add After:=Worksheets("LOI Sheet")
ActiveChart.ChartType = xlLineMarkers
ActiveChart.SetSourceData Source:=Sheets("Data for Charts").Range("D2:D" & e), PlotBy:=xlColumns
View 9 Replies
View Related
Oct 3, 2013
I've got an interactive chart on a sheet where users select a chart from a combo box control and a picture link to the chart is displayed. The actual charts are on a hidden sheet. I have to activate the charts first for it to work so I put a button the sheet and recorded a macro where I unhide the hidden sheet, select each chart as I scroll down the screen by clicking on it then hide the sheet again and return to the interactive chart.
My problem is that I'm getting an error when the macro tries to select the first chart which is called "Chart 6":
Run-time error '-2147024809 (80070057)':
The item with the specified name wasn't found
I recorded the macro so I'm not sure why the macro isn't working now.
Code:
Sub ResetCharts()
'
' ResetCharts Macro
' Reset all charts
'
'
Sheets("Budget v Actual Graphs").Select
Sheets("Graph BG").Visible = True
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.ChartArea.Select
ActiveWindow.SmallScroll Down:=15
ActiveSheet.ChartObjects("Chart 35").Activate
[Code] ............
View 5 Replies
View Related
May 22, 2012
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
View 6 Replies
View Related
Aug 13, 2014
I have created a report with 22 sheets as different pages to be included or hidden depending upon the type of report needed. I had found several sources saying to use the Custom Views function. So for example I will unhide all the sheets and add as a Custom View "All Sheets" and then whittle it down to the 5 I might need for B type inspections and add that view as B Inspection. But when I try and toggle between them I'm getting an error message that says "Some view settings could not be applied" - and thew saved view I was looking for is not the same sheetwise.
View 1 Replies
View Related
Aug 31, 2006
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
View 5 Replies
View Related
Mar 12, 2007
I have a custom toolbar containing several buttons which run several macros. Works fine except on exiting the programme and re-opening the workbook, if I try to use the custom buttons I get an error message which tells me it cannot find the ' name of workbook, name of macro' macro I then have to re-assign the macro which has been there all the time but without the file name in front of it.
View 7 Replies
View Related
Aug 27, 2007
Below is a macro I recorded to help copy 'Paste Special - values only' data between two spreadsheets that have different colour and conditional formatting in cells.
However, if this is run and there is no data to paste, it throws up the End and Debug error.
Any chance that someone knows that if there is no data sitting on the Clipboard, then a msg box would appear saying "Please select the data you require to be copied" in the message box.
Sub data_input()
ActiveSheet. Unprotect
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B5:AG4804").Select
Selection.sort Key1:=Range("B5"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("B5").Select
ActiveSheet.Protect
End Sub
View 4 Replies
View Related
Jun 15, 2008
I have a very wide sheet in which I have hidden and saved seven views.I am using it for a very long time but when i did some edit work in the 'full' view,the other views are not showing. In stead I am getting the messages "cannot shift objects off sheet" and "some view settings could not be applied".This is very frustrating since a lot of patience was tested while making this wide data.
View 2 Replies
View Related
Jul 18, 2013
We are using Windows7 with Excel 2007. We have old code from excel 2003 and earlier that was adding a msoControlPopup with other sub-controls using the code below:
Code:
Set HelpMenu = CommandBars(1).FindControl(Id:=30010)
If HelpMenu Is Nothing Then
' Add the menu to the end
[Code].....
I tried going to Excel Options>Customize>Reset to reset any customizations to the quick access toolbar as this was recommended by something else I found online. This did not fix the problem.
I can find the control in the Immediate window but it just isn't showing in the add-ins tab. if I can find and repair that XML file perhaps?
View 9 Replies
View Related
May 17, 2008
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Apr 19, 2006
I have the following code for a sheet in my workbook that has 3 charts:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.Calculation = xlCalculationManual
ActiveSheet.ChartObjects("RdteObs").Chart.SetSourceData ThisWorkbook.Names("GSumRdteObs").RefersToRange
ActiveSheet.ChartObjects("RdteWip").Chart.SetSourceData ThisWorkbook.Names("GSumRdteWip").RefersToRange
ActiveSheet.ChartObjects("RdteExp").Chart.SetSourceData ThisWorkbook.Names("GSumRdteExp").RefersToRange
Application.Calculation = xlCalculationAutomatic
End Sub
but whenever the sub runs, I get this error message: "Excel cannot complete this task with available resources. Choose less data or close other applications." Does anyone have an idea what's going on?
View 3 Replies
View Related
Jun 27, 2013
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
View 2 Replies
View Related
Sep 5, 2012
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
View 2 Replies
View Related
Feb 15, 2014
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
View 9 Replies
View Related
