I have a spreadsheet where the value in cell A2 can change daily. I need a formula or macro that will allow me to copy the value in cell A2 and paste to B2, but if B2 is not empty, paste to C2, and if B2 and C2 are not empty, paste to D2, etc.
View 9 RepliesIn a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies View RelatedI am looking for a macro that will open a file called File1.xls highlight only the cells in columns A:B that have content, then toggle back to another file called File2.xls, scan columns A:B, find the next blank cells within A:B and paste.
Here is a sample of what i am looking for:
Macro to scan File1.xls and find & copy only cells in columns A:B that are not blank.
File1.xls
_|__A_ |__B_|
1|_text|_text| (Copy)
2|_text|_text| (Copy)
3|_text|_text| (Copy)
4|_text|_text| (Copy)
5|blank|blank| (DO NOT Copy)
Toggle to File2.xls, scan columns A:B, paste content copied cells from File1.xls in next blank cells in columns A:B of File2.xls.
File2.xls
_|__A_ |__B_|
1|_text|_text| (Pre-existing text)
2|_text|_text| (Pre-existing text)
3|blank|blank| (Paste Row1 from File1.xls)
4|blank|blank| (Paste Row2 from File1.xls)
5|blank|blank| (Paste Row3 from File1.xls)
6|blank|blank| (Paste Row4 from File1.xls)
I have a Worksheet that is manually populated with file names into the 2nd cell of each column for columns A through D.
I need a macro that will loop through each column, starting at B2, c2 etc, and copy each value, and then paste it into the first available blank cell in column E
Before
YesterdayToday10108595101085661010859510110182
After
ALL10108595101085661010859510110182
Ive tried a few combinations of code, but nothing seems to be working.
i need the vba code to
paste into last blank cell of column A
I want to cut a range from one worksheet, and then paste it at the end of a column in another worksheet.
I have tried this
Sheets("Latest Results").Select
Range("b5:b500").Select
Selection.Cut
Sheets("Archived Results").Select
Range("A500").End(x1up).Offset(2, 0).Select
Selection.Paste
Sub simplecopypaste()
Workbooks.Open Filename:="G:DATAWork for JCdata source.xls"
Range("B2:E2").Select
Selection.Copy
Windows("Data Destination.xls").Activate
Sheets("Sheet1").Select
Range("A2").Select
ActiveSheet.Paste
End Sub
This should open my file, find the relevant data and copy it to the worksheet that contains the macro. At present I can have it paste to the first cell however in future the first cell will have data and as such i need it to paste to the first blank cell in column A. any ideas on how to do this, do i need to get excel to scan from the bottom cell up until it finds a cell with data then paste below it? if so how do i do that.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am having problems finding a way to copy the contents of a cell and paste the content to a different worksheet on the first blank cell at the end of a column/row.
View 3 Replies View RelatedThis loop is overwriting the first cell in range and not writing to the first blank cell in range.
For Each cnote In NOTE
If Trim(cnote).Value = "" Then
cnote.Value = notes.Value
Exit For
Else
End If
Next cnote
If I take out the exit for , it copies to all cells in range.
Data range is A2:A301. From this range sometime all and sometime selected data is required to be copied in another column for example C2
downward. What is needed: select the range from A2:A301 with an input box then the required data to be pasted in C2 downward but with a blank cell after four cells.
C2
C3
C4
C5
blank
C7
C8
C9
C10
blank
and so on.
I'm doing it Ctrl+C n Ctrl+V but that is very time consuming.
I want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies View RelatedHow to copy paste data without replace existing data or keeping existing data?
it's possible??
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....
I have spent several hours searching the forum but have not been able to find any code that I could tailor to my specific need.
Basically, when I press a button on a 'Util' sheet, I need to cut every row on the 'Source' sheet with 'Closed' in column 'B', paste the rows to the next blank row on the 'Closed_Requests' sheet, and delete the resulting blank row from the 'Source' sheet.
I get reports weekly that contain too much information. Using "IF - LIKE - THEN" in my macro I copy and paste only the relevent data from the new work sheet to a separate worksheet.
It works fine except, it pastes over the previous data instead of below it overwriting the old info. Please have a look at my code, How do I instruct it to paste in the first empty row?
way to copy and paste a formula into every other blank row?
The formula will be staying in the same columns the whole way down the sheet. Eg: A1, A2, A3 ..... ETC
I need to be able to setup make for to take taken info say from row 2 in sheet 1 nd paste it into sheet 2 in the next blank row in 2003 version
View 3 Replies View RelatedI am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
I am trying to write a macro which will copy a formula located in cell "A1" and paste it into all blank cells within the range "B1:B20" .
View 9 Replies View Relatedwhen I try to paste the next file underneath and look for the next blank row, this code doesn't seem to work.
Windows("Voice Pipeline.xlsm").Activate
erow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
I have been tinkering with a code for a few days now and managed to finally get it working . The Code basically copies data from one spreadsheet (Macro Tester6), opens up another spreadsheet (Macro Tester Master), pastes the data, Saves the file (Macro Tester Master) and then closes it.
The Macro Tester6 file is then left open as I prefer.
The problem I have is that the data always paste into the same row, hence overwrites data already inserted.
the code finds the next blank row to paste the data in.
My code is:
Private Sub CommandButton1_Click()
' select current workbook and paste the values starting at A1
Windows("Macro Tester6.xls").Activate
Sheets("Sheet1").Select
Sheets("Sheet1").Range("A1:I1").Select
Selection.COPY
' open the source workbook and select the source sheet
i am trying to use Skib blank in paste special
but it pastes the value with the same blank cell
================
I have a range that I need to copy to a new worksheet. It basically looks like steps going across the sheet. Whenever I skip blank cells during the paste to the new sheet Excel does not skip anything. Any ideas on how I would shift all data to be on the left side of the without copying the blank cells.
View 5 Replies View RelatedSo I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
View 9 Replies View RelatedI have a workbook which has data in column A. I also have data in column I. What im trying to do is copy and paste the data from column I to A but if the cell in column I is blank I need that ignored and the data thats in column A at pres kept.
I have several worksheets( Named 1, 2, 3,4,5) in a book containing data , the amount of rows for every sheet is variable depending on the job. I would like a macro that copies the data from the first of the worksheets and paste it in a blank one(lets call it Results), then copy the data from the worksheet two immediately below and do the same with data contained in worksheets 3,4,5.
View 9 Replies View Related