I have spent several hours searching the forum but have not been able to find any code that I could tailor to my specific need.
Basically, when I press a button on a 'Util' sheet, I need to cut every row on the 'Source' sheet with 'Closed' in column 'B', paste the rows to the next blank row on the 'Closed_Requests' sheet, and delete the resulting blank row from the 'Source' sheet.
I need to be able to setup make for to take taken info say from row 2 in sheet 1 nd paste it into sheet 2 in the next blank row in 2003 version
View 3 Replies View RelatedI have command button in Sheet 3 (from where I will be running the macro) and I need a macro which will delete all the blank columns and rows in the data containing in Sheet 1.
View 2 Replies View RelatedI have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?
View 9 Replies View RelatedI want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies View RelatedI have mananged to find and tweak the following code in order to serve my copy / paste to master sheet requirements.
At the bottom of the code I have added a delete rows based on column contents routine although I'm not sure if it is actually the right one to use.
I have included it in the same module in order to tidy up the whole process and have it all operate under one click.
As stated on the sheet in this exmple, The paste could consist of any number of sheets although the range is always the same on each sheet. (only amounting to around 20 rows that we are dealing with so no reams of data with odd empty rows that would take an age to find otherwise).
The data can look like it does on Sheet 2 here and also could look like it does on sheet 3. (this data is coming from a sales rep's order sheet)
From the routine in module 1, I just don't know where an "add an empty row" or delete all empty rows bar 1" code would need to be inserted in order to keep the process going until all sheets are copied.
I'm aware that with the delete code at the bottom, the whole copy process is completing before the delete process then does it's bit so think I'm on the right track in thinking that the delete all empty rows but leave one" requirements needs to be further up the code but I just don't how to get the result I need or where that code should break into the routine.
The only other way I can think to acheive the result is to allow the range to increase by 1 row on the form but somehow make sure that the last row in the range contains a character in column B to "trick/force" the delete routine to leave that row in. That would be do-able but the trouble is, how do you get a value into a cell that the delete proces would treat as data but not be visible so keeping my spacer line tidy? I've tried just putting a space in the last row of the range in column B but the row still gets deleted.
I have a very basic code to copy "non-blank" data from one sheet and paste to another. The code is not complete yet - I am running in debug mode I get the above error. My code is as below.
Sub SampleFind()
Dim StrWord As String
Dim Quantity As String
Dim i As Long
Call nrows
For j = 2 To 2
For i = 2 To nrows1
[Code] ..........
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I have several sheets with one master sheet. I have a trigger on each sheets that manipulates the data on that particular sheet. Here is the code I'm using:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim cell As Range
Set r = Intersect(Target, Range("A:A"))
[Code] .....
Now the point where i put new code is where i want the information from that particular row, column a thru column m to be special pasted linked to the first blank row from the top down to be pasted starting over from Column B. so A1 would be pasted on B1. I ran the recorder and got this as the code ActiveSheet.
Paste Link:=True so i do i incorporate what i want.
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I want to copy a row from one sheet if it fulfills certain crteria to the next blank row of another sheet. However, my code only copy row 20 of one sheet 20 times in the other sheet. Why? This is my code:
Sub Macrotest()
Dim r As Integer
r = 4
[Code].....
I want to copy a row from one sheet if it fulfills certain crteria to the next blank row of another sheet. However, my code only copy row 20 of one sheet 20 times in the other sheet. Why? This is my code:
Sub Macrotest()
Dim r As Integer
r = 4
Do Until Cells(r, 9) = ""
If Cells(r, 9) = "SS" And (Cells(r, 7) = "" Or Cells(r, 7) = "Pending M") Then
Rows(ActiveCell.Row).Copy
Sheets("SS").Select
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
[code]....
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....
I have turned off show zeros on a sheet. This is good in general, but for certain cells I would like excel to show zeros if the formula output for that cell is zero.
Background information: I am working with a very large workbook, and the final sheet is my output file. This sheet is then exported to a CSV file and imported to another program in my workflow process. I need most blank cells to remain blank, so that they are interpreted as blank in the output program. Some of my cells are actually zeros which I intentionally inputted as zeros...those should be interpreted as zero and not blank.
code to get to know about the sheet in a worksheet is blank and then delete that.
View 5 Replies View RelatedI recorded the following macro which deletes specific buttons and drop downs from a sheet. I would like a macro that can delete all Buttons and Drop Downs without them being specified.
View 3 Replies View RelatedI have a worksheet, "District", that has names of team members from A2:A (The number of team members will vary, so I would need the macro to stop when the list ends). I need these to be distributed to column A on another sheet, "Input", from A11 down until it hits a row that has a blank cell in column F. I've tried a couple of things, but just can't seem to get it to work.
View 14 Replies View RelatedI have a Workbook with 18 "sheets and a recap sheet. Each sheet will have a different number of rows between A9 and N60. On my recap sheet I want to be able to find what the last row with data in Column A and then be able to do a vlookup on that row to display the data in Column 2,3,4, exc. I know how to do the vlookup's fine but I don't know how to specify to select the last row. The data will always be different and the number of rows will never be the same either.
I tried the below formula because everyone complains that if you use True is returns the last row but that didn't work.
=VLOOKUP(A2,Sheet_2!$A$9:Sheet_2!$N$60,2,TRUE)
Is there a way to do this without VB, I don't understand VB at all and that would get way over my head really quickly.
I have a commandbutton and I am trying to workout the code to go into its onclick event.
I have an input worksheet (inputsheet) where i enter information into cells A1:A5
I would like to click the button and have this info then transferred into the record sheet (called: recordsheet) in columns A to E.
Each time I press the button I would like the info in inputsheet A1:A5 to be transferred to a new row in recordsheet.
I'm working with an excel worksheet that uses a TFS plug-in to retrieve tree-structured data from a TFS database. Each item has a "Title" depending on it's position in the tree, in some cell between "Title 1" and "Title 9" inclusive.
Currently I display the title in a new column on the same sheet as the TFS data using the formla below. Since custom columns do not automatically get applied to new items in the TFS list after refreshing, I have to click in a cell and apply to all rows everytime I refresh.
On a different sheet I have a pivot table which contains the work item "ID". What I'd like to do is just be able to retrieve the title for each work item in a column on the sheet with the pivot table, using index/match to find the row, and then return the title from the first non-blank title cell.
Current formula on the TFS sheet (note that '@' indicates "this row", and I've replaced the long table name with "TFSData")
Code:
=IFERROR(
INDEX(TFSData[@[Title 1]:[Title 9]],
MATCH(TRUE,
INDEX(TFSData[@[Title 1]:[Title 9]]"",
1,
0),
0)),
"")
I have a master sheet which shows from Jan to Dec (in 1 sheet), so I did a break down on each tab e.g Jan (First Tab), Feb (Second Tab), etc.
So basically now i have some cells that are blank, in the breakdown sheet which i copied from the master copy.
i use counta but it returns me 140 instead of 130(manually calculated). im guessing that is because in every cell of Jan tab i have "=master!D1" in it.
how do i formulate a proper formula for this?
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies View RelatedI am indexing dates from one workbook to another.
There are some blanks in the list that I am using, and I need to the blanks to stay as blanks in the sheet that I am indexing to, however they are displayng as 00/01/1900.
I want to have code that will print everything down the sheet until it sees a blank in column A. I have included the code i am trying but it keeps giving me errors.
View 3 Replies View RelatedOn Sheet 1 I have Data Validation Lists set up. On Sheet 2 I have the information populating from what is entered on Sheet 1, only problem is...when I don't have anything entered in the cell(s) on Sheet 1 then the cell(s) on Sheet 2 reflect 0. I would like the cell(s) to remain blank if nothing is entered on Sheet 1.
View 4 Replies View RelatedI am try to get the following VBA macro to work; however, I keep getting hung up on errors regarding the formula I am trying to input. It is getting hung up on the apostrophes and dollar signs. I am fairly new to VBA so I am lost when it come to converting my sheet formulas to VBA.
Code:
With ActiveSheet.UsedRange.SpecialCells(xlCellTypeBlanks)
.Formula = "=RAND()*0+VLOOKUP(INDIRECT(ADDRESS(1,COLUMN(),3),TRUE),INDIRECT("'"&TEXT(INDIRECT("$A"&ROW(),TRUE),"DD-MMM-YYYY")&" Inv'!"&"$J:$K",TRUE),2,FALSE)"
.Value = .Value
End With
I have a macro which opens a csv file, moves a few columns about then pastes the data into a master workbook. The problem I have is that even though there is only around 1,500 rows of data on the csv file, the sheet on the master workbook is showing up to row 1,048,576 after the data has been pasted in! This is causing issues as I use this data later on in the macro and there are a couple of 'find and replace' commands that take an age to run because of the number of blank rows.
Code:
Workbooks.Open Filename:= _
"L:PVDDBB15." & Format$(Sheet1.Range("G5"), "ddmmyy") & ".csv"
Columns("AB:AB").Select
[Code].....
The problem is:
I Sheet 1 cell I33 is updated weekly. It would then be great with a macro that could copy from I33 in Sheet 1, into C5 in Sheet 2. But if C5 is filled, it should paste into D5, and so on.
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.