On the attached form, for row 3 information is manually inputed into C3 and E3 to J3; K3 then looks at the max value inputed in E3 to J3 and alters L3 accordingly.
Row 4 is my attempt to automate the process. I am trying to alter the sheet so that the information added into C4 updates E4 to J4 automatically and then K4 looks at the max value and alters L4 accordingly.
Since I added the formula to H4 to look for info in C4, the max formula in K4 no longer works, as such L4 will not update.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
This IF formula does not work on the last part of this formula IF(E10>50,"$50.00",0)))) and I think there is a conflict with the IF(E9>199,(E9*0.01) but I cannot figure out what the problem is.
Combing these two formulas. I have a work schedule spreadsheet. If the employee is Off I want the value to = 0 (zero hours). But if the cell has a start time I need it to calculate those hours. I know both of the formulas work individually. But I need them to work together.
Formula for when cell says OFF: =IF(C11="Off",0)
And the second
Formula to calculate hours (based on start time/finish time is the same for all employees) =($X$4-C11+($X$4<C11))*24
What am I doing wrong here. Some times if I do a =if( ) formula it doesn't work. For example, look at the attached picture. Cell K63 should say "End of Run". But it doesn't, What gives?
Also I have had before where i do =IF(X62>$O$2,"End of Run", 0) (and $O$2 =81) and the cell when X62 is 81, not greater than. I know I can to >=, but thats not what I am doing.
I currently have a sheet of data with names and scores (1-10) on e.g.
NameScoreJohn10Smith5Steve4John9
and what i am wanting is a formula that will read these columns and tell me the amount of 1's, 2's, 3's, 4's, 5's, 6's, 7's, 8's, 9's and 10's the corosponding name has gotten.
for example:
JohnSmithSteve123415167891101
I have been playing around with COUNTIF formulas but cannot seem to work this out.
I'd like a calculation that gives me a total of 7.50 hours instead of 8:00 hours (I'm hoping to add up the time worked into a meaningful hour:minute format)
LastRow = Worksheets("Sheet1").Cells(Rows.Count, "K").End(xlUp).Row For i = 2 To LastRow Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)" If (Worksheets("Sheet1").Range("AE" & i).Value < 1.5) And _ ((Worksheets("Sheet1").Range("K" & i).Value > 0) Or (Worksheets("Sheet1").Range("L" & i).Value > 0)) Then Worksheets("Sheet1").Range("AE" & i).Font.Color = 255 End If Next i
My loop here works just fine, and my Formula works in testing. However when I move my formula inside the loop I get an error.
Is the syntax wrong in this line = Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
This situation is as follows. I have a worksheet with 12 sheets. One sheet per month which is used to show monthly cost expenses for certain categories. I have a budget category, a paid this month, a paid previous months and paid year to date. I suppose I can take the paid previous months out if I can get this to work but I need to calculate one of those cells (prev months or ytd) to calculate and sum the previous months and then tack on the current month.
Previously I have had these categories and used =SUM(Month:Month!A1) Like --- > =SUM(Jan:Nov!C10)
This works and all I have to do is add on the current month to paid prev and get a ytd but this also means that I have to rewrite the formuals concurent with the noted month. Is there a way that I can make one sheet as a base and then just make 11 copies with a formula that will sum all previous worksheets to the start at a certain cell reference. So say sum all A1's on all worksheets before the one that is currently in use say for example Dec.
If I need to rewrite them that is find but I figured there should be an easier way to do this so I would not have to rewrite each month individually and then copy the formuals through that sheet.
I have a spread sheet I have set up to calculate sales results, I have a column for each week in the quarter with the date at the top and a different page for each individual. I want to be able to enter a number to show how many weeks we have had and the spreadsheet to give me a cumulitive amount for the cells up to that date.
For example if I was to enter 1 in a cell A1 I would want the sum t work out just C3 for example.
If I enter 3 in A1 I would want the sum to be C3+C4+C5 wich is the three cells.
If I enter 6 in A1 it would be C3+C4+C5+C6+C7+C8 etc.
I have a VLOOKUP formula, so when the cell above (C5) has a value, it returns the value from a defined list. Simple so far and it works great when I manually input the value in the cell (C5).
The problem occurs when I change C5 to contain an AVERAGE formula? Any ideas why it will only work when there is a plain old value in there, but not a formula?
is there a a way to get an Array formula to work in a shared workbook? when this was put in the workbook It worked perfectly but I didn't think about the fact the workbook was going to be shared !
I wanted to do a sheet for calculating prices for my work. I want to have 2 cells where in one I would type in manufacturer price and in other one I would get my price after markup. I have a list of price ranges that I don't know how to make a formula for. For example:
If price is $0-$74.99 than add $50 If price is $75-124.99 than add $75 If price is $125-174.99 than add $100 and so on til $7000
I am trying to get a formula to work where it will search a single cell (on a sheet called "Calls") to see if a particular code is in there, if so return a value using HLOOKUP from a table on a sheet called "Values". The problem I am having is how to use the wild card etc because everything I have tried returns an error...
The code I am trying (Without wild cards, because they all failed) is...
Want to work out formula for working hours If Mr Smith is booked to work I must pay him a min of 8 hours pay at rate A then upto 10 hours still on rate A but after that he gets rate B I need to enter his data on a daily spreadsheet
In a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
I have a niggling problem with a worksheet when using Hlookup to return a value from a range of cells it is coming up with blanks when there is data in the range.
There is only ever one row cell containing text in the specified range and i need this to be returned in another column.
The problem with the hlookup formula i am using is that it will not work if cells contain formulas and in the range i am working on all cells contain formulas.
I know this formula works if there is text without a formula in the cell range, as soon as it hits a cell with a formula though it won't work.
I have attached the sheet : Book4.xlsx
From j138 there is one cell with text i wish to be returned in column q for each row. E.g., in q1 the first cell text returned would be khawatim. q2 should contain cantor etc etc.
complicated formula for working out prices including applying discounts.
I'm looking for the correct formula for G6,G8,G10 and G15,G17 and G19
I think I have them correct(?) to include standard days and extended days but I can't make it work to include Half days. The formula gets too complicated for me to follow.
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.