On some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 RepliesI have a cell for example with:
"
11111
22222
44444
77777
"
What the effective way to delete all empty rows in current cell? I confused with VbCrLf, VbNewLine and e.t.c I want to get after that:
"
11111
22222
44444
77777
"
I have completed an automated time sheet but have realised that there are some days where overtime entries make it go wrong.
There is one column where you enter an overtime shift when the cell has an entry I need all the other calculations to be zero
A1 START TIME
B1 END TIME
C1 HOURS WORKED ARE CALCULATED using a formula
D1 OVERTIME COLUMN ( IF AN ENTRY IS PUT IN HERE MANUALLY I WANT C1 ALWAYS BE 0
I tried various ways with isblank but just get true or false.
I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies View RelatedThis is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.
It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.
When choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.
View 4 Replies View RelatedHow do I stop a text box called "Text Box 4" from being deleted. It was created from the drawing toolbar. I don't want to protect the worksheet if possible.
View 9 Replies View RelatedI've written some VBA which creates worksheets to temporarily store data in. At the end of the code I delete the worksheets. However, for some reason I am getting a message box which asks for confirmation. How can I avoid the user of my report having to click OK for each of the worksheets which need to be deleted?
View 3 Replies View Relatedif there's a way to find the first non-empty cell in a worksheet?
Here's what I'm trying to do, the incorrect syntax is underlined:
If IsNotEmpty(123, 2) Then
'Execute some code
End If
I am need of some code that I can assign to a button that will take a user to the first empty row of another worksheet in order to do some data entry. I only need to look in column A, which is titled "Tag Number."
View 2 Replies View RelatedI am currently trying to adapt the Macro I created that copies and pastes from one work sheet to another. I need to paste to the first empty cell in A column. See the code I have listed below.
Sub Button15_Click()
Selection. AutoFilter Field:=1, Criteria1:="<>"
Range("A2:E78").Select
Selection.Copy
Sheets("WorkSheet").Select
Range("A17").Select
ActiveSheet.Paste
Range("C17").Select
Application.CutCopyMode = False
Range("A1:E13").Sort Key1:=Range("A1"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Sheets("XH & HVYR").Select ..........
When the worksheet is changed;
-For each row between A3 and A5000
-If cell in column L is empty
-Do Nothing and move on to next row
-Otherwise if cell in column L is not empty
-Copy entire row to alternate sheet, and delete row from original sheet.
-After all rows between A3 and A5000 have been checked, sort alternate sheet in ascending order based on the contents of column A.
The issue is that the code keeps skipping some rows that should be copied, possibly due to the 'for each' command not liking how I'm deleting rows (maybe?)
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
Dim lRow As Long
lRow = Range("A3:A5000").Rows.Count
[Code] .....
when I reference the information in worksheet 1 with worksheet 2, and I have no info in worksheet 1, I get zeros in worksheet 2. is there a way to have the cell show up empty until there is information worksheet 1?
View 9 Replies View RelatedI have a sheet with a reference field that I want to sort. Each cell in the reference field has a formula in it, which specifies that the cell remain blank unless there is a value in the cell. The values are either text values or number values. e.g. =IF(ISERROR(S4),"",VLOOKUP(C4,'Rider Data'!A:G,6,FALSE))
When I sort the field in ascending order by the column that contains the formula above (using a macro written for this sort procedure), where the expected value is a text value, all the blank cells are sorted ABOVE the cells with text values in them, rather than below, even though they are blank cells. However,if I sort on a different column which contains time values or numerical values, the sort function works just fine. I have tested the VBA code that produces the erroneous sorting and confirmed that it happens only when sorting on columns that contain text values. I would like to sort text values in ascending order with blank cells BELOW the sorted cells.
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
I copy information from one worksheet to another. Now i specify the range to copy in the macro. What i need is for the macro to find the end (last row) of data and than copy everything from row 5 to last row.
The below is a macro i currently use:
Sub Import_FNGC()
Const TARGET_FILENAME = "2008.xls"
'
' import_FNGC Macro
' Macro recorded 1/30/2008 by wwrobel
'
'
myMSG = "This will clear the data and import information. Do you want to continue?"
Response = MsgBox(myMSG, vbExclamation + vbYesNo, myTitle)
Select Case Response
Case Is = vbYes
Range("A5:BM100").Select............
I am using Excel 2007 on Windows Vista Business 32 bit. I have several workbooks. Each one contains 33 worksheets. 31 of the worksheets are for each day of the month, the other two are for yearly totals and revision history. Recently, a menu bar has appeared at the bottom of my worksheet. At the left is an icon that states that no macros are being recorded, click here to start recording. The center of the bar is blank, but placing the mouse over the bar brings up a customization menu.
At the right side of the bar are three icons dealing with page layout. As I scroll down the worksheet entering data for the day, the cursor goes below the bar and the screen does not move up as it used to do. Also, by using the arrows keys to scroll down, I do not see the bar containing the worksheet names. Luckily, I have a macro that allows me to save the current days worksheet and move to the next one, otherwise I would not be able to do that. When I open a previous month, the bar is there also, so it must be a flag that I can't find or don't know about. Is there a way to get things back to normal?
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
if column E is "Annuity", you can type a value in column J and it runs a formula to calculate a value for column K. If E is not "Annuity" it clears the contents of J (which should clear K). What's not working is when column J gets cleared or manually deleted, column K must be blank. The worksheet_change event is not working for deletion of column J.
View 5 Replies View RelatedI have a workbook that contains 2 worksheets. The first worksheet contains all the data. The second sheet contains formulas that reference (absolute for all) the first sheet.
I run into problems (actually the users do) when the data set is updated with new information. Sometimes the users will delete all the data rows first and then copy the new data to the blank cells. When they do this, it messes up the formulas with #REF! error. Is there a way to prevent this? or is there a way to hard code the formulas so I don't get this error?
I have a cell with data validation: list, that allows values contained in named range. I want to disallow to delete contents of this cell (with 'del' key, or when i edit cell, delete text and then press 'Enter'). Is it possible to do with formula or VBA
View 4 Replies View Relatedis it possible to delete/remove all non use cells
for example if i only want the cells A1 THROUGH TO O31
all the rest removed??
This time ive created a visual basic form that asks for a row number and when you put a row number in this form it deletes what is in column A, B and C of that row and shift the rows up so that there are no gaps between the data in the rows.
I need to know what code i would have on the 'delete' button of the form.
If you want me to describe it any further i would be happy to, just ask.
Im looking for code for a button that asks for a Record number, and it will delete the record. But the record number is written in cells as 'Record No.1' 'Record No.2' etc. But i want the messagebox to ask for a single number and it would delete that record. Now the position of the records is what will be the difficult bit about this code, but it has a pattern.
For Record No.1 i need deleting cells C2:J100
For Record No.2 i need deleting cells L2:S100
For Record No.3 i need deleting cells U2:AB100
If anyone could give me a bit of code that works for these 3 then i could waste a load of time filling the rest of them out.
I have a worksheet with multiple entry boxes in a row. Depending on the value in one row, another row will either yield the result from a formula, or remain blank, and this cell needs to be locked. I was able to do this by first putting the formula into the destination cell, and then using custom data validation that says the cell value = "". So this prevents anyone from typing in that cell, no matter if it yields the formula result or must stay blank. What it doesn't protect against is someone deleting the contents of the cell. The reason I don't want to protect the cell is because I want people to be able to highlight the whole row past that cell and delete it all at once. So either using Data Validation, a formula, or VB programming I need to not allow someone to do ANYTHING to that cell, even delete the contents, without locking the cell. Hopefully it can be done, thanks!
For example, if E17 = "X", then K17 = INPUT!$M$28*J17. If E17 <> "X" then K17 is blank. Either way, I don't want any typing or deleting of K17. This applies for range K17:K91, and corresponding E17:E91.
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I would like to know if there is a way to expand the selection of cells from the current cell you are on to the very bottom cell available in the spreadsheet.
For example, I want to apply a formula from A12 - the very last A cell row in the spreadsheet.