if column E is "Annuity", you can type a value in column J and it runs a formula to calculate a value for column K. If E is not "Annuity" it clears the contents of J (which should clear K). What's not working is when column J gets cleared or manually deleted, column K must be blank. The worksheet_change event is not working for deletion of column J.
View 5 Replies
I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies View RelatedThis is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.
It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.
Im looking for code for a button that asks for a Record number, and it will delete the record. But the record number is written in cells as 'Record No.1' 'Record No.2' etc. But i want the messagebox to ask for a single number and it would delete that record. Now the position of the records is what will be the difficult bit about this code, but it has a pattern.
For Record No.1 i need deleting cells C2:J100
For Record No.2 i need deleting cells L2:S100
For Record No.3 i need deleting cells U2:AB100
If anyone could give me a bit of code that works for these 3 then i could waste a load of time filling the rest of them out.
I have create excel VBA to put data from excel sheet to Server database through network. I create the VBA on the "Workbook_beforeprint" so every time the user print out the sheet, the code will run.
Problem occur when there is no network and excel application become not responding.
I want to make VBA code so that every time excel application become not responding because no network, this code will bypass the existing VBA and resume to print.
Some times the cell having formula, is not calculating , i need to click F2 then enter to get the real calculation. Why this is happening and how to avoid it?
View 1 Replies View RelatedIn my attachment, I had try to create a PO system that will show a dialouge box and capture input data of the dialogue box into the worksheet.
However, I am not able to make the macro recognise any manual deletion from the worksheet (e.g. delete any row in between the full data). Hence, when I input new data, the row will start from the last register counting of rows (i.e. Range("g1") in my attachment.) and it will leave a blank row after the last row of data and so on...
I will also like to know if I need to fix the "date" input to select from a "calendar" pop-up and input the date format into (e.g. year into column a, month into column b and day into column c) 3 separate columns. Is it possible?
So essentially I need a VBA Macro code for Excel 2003 that can take raw data that is input every month via a text document and move it to the next sheet in the workbook. This data is essentially broken down by a "platform" in the raw data section ("P") with monthly totals for each month but it is broken down by platform in total which goes in descending monthly order on the "dat" tabs (which is the final place for the data).
So what needs to happen is the data for the last two years must go from the "P" tab to the "PDat" tab under the correct platform and the correct spot for the newest month. The data that is input each month is in the same format month to month, just starting two rows down from the last month.
At the end of two years, the oldest year of data must be deleted and the other data moved up to the vacant area so that the sheet never grows too large (i.e., at the end of this year 2012 will be deleted and all the data will need to get moved up).
Attached is a sample data workbook.
I have the following function in a worksheet module:
Private Function NixEmptyColumnsAndSuperfluousRows()
Me. Range("A1:A7").EntireRow.ClearContents
Me.Range("A1:A7").EntireRow.Delete Shift:=xlUp
Me.Range("BE1").EntireColumn.ClearContents
Me.Range("BE1").EntireColumn.Delete Shift:=xlToLeft
Me.Range("AT1").EntireColumn.ClearContents
Me.Range("AT1").EntireColumn.Delete Shift:=xlToLeft
Me.Range("AK1").EntireColumn.ClearContents
Me.Range("AK1").EntireColumn.Delete Shift:=xlToLeft
Me.Range("Y1").EntireColumn.ClearContents
Me.Range("Y1").EntireColumn.Delete Shift:=xlToLeft
Me.Range("O1").EntireColumn.ClearContents
Me.Range("O1").EntireColumn.Delete Shift:=xlToLeft
Me.Range("K1").EntireColumn.ClearContents
Me.Range("K1").EntireColumn.Delete Shift:=xlToLeft..............
I have a workbook that contains 2 worksheets. The first worksheet contains all the data. The second sheet contains formulas that reference (absolute for all) the first sheet.
I run into problems (actually the users do) when the data set is updated with new information. Sometimes the users will delete all the data rows first and then copy the new data to the blank cells. When they do this, it messes up the formulas with #REF! error. Is there a way to prevent this? or is there a way to hard code the formulas so I don't get this error?
I have a cell with data validation: list, that allows values contained in named range. I want to disallow to delete contents of this cell (with 'del' key, or when i edit cell, delete text and then press 'Enter'). Is it possible to do with formula or VBA
View 4 Replies View RelatedI have a cell for example with:
"
11111
22222
44444
77777
"
What the effective way to delete all empty rows in current cell? I confused with VbCrLf, VbNewLine and e.t.c I want to get after that:
"
11111
22222
44444
77777
"
On some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 Replies View Relatedis it possible to delete/remove all non use cells
for example if i only want the cells A1 THROUGH TO O31
all the rest removed??
I have completed an automated time sheet but have realised that there are some days where overtime entries make it go wrong.
There is one column where you enter an overtime shift when the cell has an entry I need all the other calculations to be zero
A1 START TIME
B1 END TIME
C1 HOURS WORKED ARE CALCULATED using a formula
D1 OVERTIME COLUMN ( IF AN ENTRY IS PUT IN HERE MANUALLY I WANT C1 ALWAYS BE 0
I tried various ways with isblank but just get true or false.
This time ive created a visual basic form that asks for a row number and when you put a row number in this form it deletes what is in column A, B and C of that row and shift the rows up so that there are no gaps between the data in the rows.
I need to know what code i would have on the 'delete' button of the form.
If you want me to describe it any further i would be happy to, just ask.
I have a worksheet with multiple entry boxes in a row. Depending on the value in one row, another row will either yield the result from a formula, or remain blank, and this cell needs to be locked. I was able to do this by first putting the formula into the destination cell, and then using custom data validation that says the cell value = "". So this prevents anyone from typing in that cell, no matter if it yields the formula result or must stay blank. What it doesn't protect against is someone deleting the contents of the cell. The reason I don't want to protect the cell is because I want people to be able to highlight the whole row past that cell and delete it all at once. So either using Data Validation, a formula, or VB programming I need to not allow someone to do ANYTHING to that cell, even delete the contents, without locking the cell. Hopefully it can be done, thanks!
For example, if E17 = "X", then K17 = INPUT!$M$28*J17. If E17 <> "X" then K17 is blank. Either way, I don't want any typing or deleting of K17. This applies for range K17:K91, and corresponding E17:E91.
I have created a chart with four data ranges. I have a check box for the four ranges. If a check box is TRUE the data is shown in the chart. When I check one of the check boxes, I want the CreateChart macro to run, but this is not happening with the code below?
View 4 Replies View RelatedI have a Word document that I'd like to print first, when I click Print on a specific worksheet (not on Print of other worksheets in the workbook, just the one). The worksheet contains customer information and is essentially a cover page for the Word document. the Word document already prints in reverse order, as does the worksheet, so I just need the Word doc to print prior to the worksheet/cover, to give me the total print package in the correct order. I've tried using the following code in the Sheet object for the worksheet in question;
Private Sub Worksheet_BeforePrintEvent()
Dim appWd As Word.Application
Set appWd = CreateObject("Word.Application")
appWd.Visible = True 'Change to False when code is good
'Open Doc
appWd.Documents.Open Filename:="S:BryanQuoting ToolsP'Binder Leading Pages.doc"
'Print Doc
appWd.ActiveDocument.PrintPreview 'Change to PrintOut when code is good
'Close Doc
Set appWd = Nothing
End Sub
I have this I found here and want it to close down excel as well but its not working and not sure why.
I have a command button tied to this: ....
Having another problem with the same macro that has been giving me trouble for a week now. Now, the macro will run, but after it finishes, excel stops responding. Is this because the macro continues to run indefinitely.
View 3 Replies View RelatedI have a genuine copy of office pro 2010. All works fine except excel!
It seems to be mainly on one workbook I have brought over from open office and on a mac! It wont save due to errors it won't tell you about? It then stops responding or crashes? Wont save as etc....
I have repaired, I have even deleted and downloaded a new office pro genuine and installed and doing the same so i guess it has to be the file?
BUT it seems to work on another laptop we have, same file, same excel????
The only thing i seem to be able to find is in the permissions it has an "unknown account"? Also under the file menu where it allows you to check the file it states something about conditional formatting i have used and not being compatible BUT i cant for the life of me find that in the menus to get rid?
I think I did something but I don't know What. I select a cell that has a 20 font Size I enter a number it show at the 20 Font. Now when I go some ware else in the work unselecting that cell the number went to font 10 and droped to the left bottom of the cell. When I select the cell again and select the the left middle and right to move the number it does not responed. It happens everyware in the worksheet.
View 14 Replies View RelatedI am working on a macro that runs when a combobox is clicked. The combobox is imbedded directly in the worksheet, not in a form.
Basically, the user clicks the down arrow on the combobox, selects one of the available choices, and the choice selected is written to the spreadsheet - each time the selection is made, it is written to a successive row in the spreadsheet - keeping track of every selection made.
The macro works, mostly. But problem is that if the user repeats a selection in the combobox (makes a choice, and then in the next cycle makes the same choice) the macro doesn't run - nothing happens.
Here is the code:
Private Sub ComboBox1_Change()
i = Cells(2, 4) ' value in cell D2
Cells(i, 6) = Cells(4, 9) ' selected value from cobobox stored in cell I4
' This value copied to column F - successive rows
i = i + 1 ' counter to increment row for next value
Cells(2, 4) = i ' Update cell D2 with new i value
End Sub
I recently added some command buttons to 6 excel files each with about 20 sheets. most of the sheets got 6 new buttons. After I added the buttons I would get memory errors when I treied to open other files. So I upgraded to Office 2003 and Excel 2003 because I read that it had increased memory available. It did not seem to help much, and now on average about evry say 10 minutes Excel hangs for about 1o seconds, sometimes saying "Not Responding" up the top. Then it starts working again. MY PC has Server 2003 and 1GHz and 512MB of Ram. Here is some info:
=INFO("memavail")1048576
=INFO("memused")50769256
=INFO("totmem") 51817832
=INFO("numfile") 173
=INFO("osversion")Windows (32-bit) NT 5.02
=INFO("release") 11.0
I do not think the PC memory or chip is being stressed it seems to be Excel's memory?
My form controls (cmd buttons) and images don't appear or don't work. I was working on a macro to cut and paste a set of cells (protected sheet, I did unprotect it), and I noticed the cmd button tied to this disappeared. It then re-appeared but I couldn't engage it. This is part of a larger workbook that consists of a single page of cmd buttons that release specific worksheets (no activex). These buttons disappeared and re-appeared and don't work either. When I select the button I can see the cell underneath light up. It's like the image is there but nothing else?
The macros run fine from VBA editor. I was thinking the issue had something to do protections? There are more than 5 passwords (set on a worksheet) being used here, there is a fair amount of protecting and unprotecting going on, and I loop through the worksheets several times. Everything was working fine and now I'm stuck. I was getting a the-object-invoked-has-disconnected-from-its-client error related to an "insert cells" command on a co-workers computer, but not on my machine. This is actually what I was trying to solve when it crapped out. I would delete the buttons and create them all again, but I can't even select them to delete them.
I recently added a formula to a spreadsheet with som complicated formula. It worked ok and I saved the sheet. Now it takes 5 minutes to open the sheet and when I try to do anything,like delete the inserted column the program locks up giving a no responding message. I can do without this column if I have to.
View 4 Replies View RelatedI am trying to write a VBA code that prevents the user from deleting row 8.
I do not want to use the sheet protection with password approach.
I simply want a code that prevents the user from deleting row 8 and notifies him via MSGBOX that such action is prohibited.
Excel 2003 - VBA - How do you detect when a row has been deleted in VBA? Better yet, how do you detect when a row is about to be deleted? I also would like to know the row number. I do not see an event handler that will inform me of the "Delete" event.
View 2 Replies View RelatedI have an Excel sheet that is similar to the following:
Customer----- contract ----- value
XYZ ------- 123 ------------- $50
ABC ------- 987 ------------- $150
XYZ ------- 123 ------------- $-50
XYZ ------- 123 ------------- $200
In the above example, I want to delete Row 1 and 3... it is an accounting issue, and when the values of the same contract match (50 and -50) then it needs to be deleted from the Excel sheet (whole row).
I want to leave rows 2 and 4.
