Before Print Event Not Responding

Jan 9, 2007

I have a Word document that I'd like to print first, when I click Print on a specific worksheet (not on Print of other worksheets in the workbook, just the one). The worksheet contains customer information and is essentially a cover page for the Word document. the Word document already prints in reverse order, as does the worksheet, so I just need the Word doc to print prior to the worksheet/cover, to give me the total print package in the correct order. I've tried using the following code in the Sheet object for the worksheet in question;

Private Sub Worksheet_BeforePrintEvent()
Dim appWd As Word.Application
Set appWd = CreateObject("Word.Application")
appWd.Visible = True 'Change to False when code is good
'Open Doc
appWd.Documents.Open Filename:="S:BryanQuoting ToolsP'Binder Leading Pages.doc"
'Print Doc
appWd.ActiveDocument.PrintPreview 'Change to PrintOut when code is good
'Close Doc
Set appWd = Nothing
End Sub

View 7 Replies


ADVERTISEMENT

Worksheet Event Not Responding

Jul 25, 2009

I have created a chart with four data ranges. I have a check box for the four ranges. If a check box is TRUE the data is shown in the chart. When I check one of the check boxes, I want the CreateChart macro to run, but this is not happening with the code below?

View 4 Replies View Related

Worksheet Change Event Not Responding To Cell Deletion ...

Nov 13, 2008

I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?

View 4 Replies View Related

Worksheet Change Event Not Responding To Cell Deletion

Nov 14, 2008

This is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.

It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.

View 6 Replies View Related

Stop Print Macro Firing Before Print Event

Oct 18, 2006

I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.

My purpose is "orange" is printed out with a reference number.

Below is the 1st code.....

View 9 Replies View Related

Print Event Macro To Run From 3 Sheets Only

Nov 9, 2011

with an event macro. Basically I have a workbook with 11 worksheets and have created a macro that increases the value of cell J3 by 1 in Sheet1. However at present it only works from Sheet5, but I now need it to run from Sheet6 and Sheet11 as well and not from any other worksheets. The code I have is as follows

Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.CodeName = "Sheet5" Then
With Sheet1
.Range("J3").Value = .Range("J3").Value + 1
End With
End If
End Sub

View 1 Replies View Related

Capture Print Event To Run Some Code

Jul 21, 2014

Is there a way of capturing the print event to run some code?

I.e. The 'Print' button is clicked and then code executed in the sheet.

View 2 Replies View Related

Before Print Event That Shows A Userform

Aug 28, 2008

I have a before print event that shows a userform - the user can then select which worksheets they want printed and select a command button. I then have a loop set up that loops through the selected workbooks and prints them. The problem is I am not sure how to tell VBA to print without it going back to the Before Print event userform.

View 9 Replies View Related

Excel 2013 :: VBA - Trigger Event On Print Screen

Jun 27, 2014

I have a project report, which is user-configurable, allowing the user to customise the data that is displayed based on a number of parameters.

To ensure the report always prints neatly (the number of visible columns and rows varies, depending on the above parameters), so I have a macro that dynamically sets the print area of the worksheet.

At present, I call the macro from the workbook.beforeprint event, which works fine in terms of printing. Ideally however, I would like the macro to be called when CTRL+P is first pressed - i.e. the resulting 'print screen', containing a preview of the print out should reflect what will subsequently be printed, when the 'Print' button is then pressed.

I am not sure if this makes sense (Excel 2010 and 2013 are different from previous versions).

View 5 Replies View Related

Dynamic Print Ranges & Worksheet BeforePrint Event

Jan 27, 2008

I have a dynamic print range defined as follows:-

=OFFSET(Sheet1!$A$1,0,0,MATCH("PRINT_AREA_ROWS",Sheet1!$A:$A,0),MATCH("PRINT_AREA_COLUMNS",Sheet1!$1:$1,0)), lets say this equates to range("A1:D12")

I also have a workbook beforeprint event defined as follows:-

Private Sub Workbook_BeforePrint(Cancel As Boolean)
ActiveSheet.PageSetup.LeftFooter = "Pete"
End Sub

My problem is that after the Print Event has fired , the dynamic range has been converted into a static one i.e range("A1:D12"). I have tried this on all version of Excel from 97 to 2007 and it behaves the same so premably this must be by design rather than a bug?

Am I doing something wrong? What is the work around? I'd rather not have to create the dynamic range within the print event procedure unless I have to as my workbook has many, many tabs!

View 9 Replies View Related

Cell Is Not Responding?

Oct 1, 2012

Some times the cell having formula, is not calculating , i need to click F2 then enter to get the real calculation. Why this is happening and how to avoid it?

View 1 Replies View Related

Application.quit Not Responding

Apr 17, 2007

I have this I found here and want it to close down excel as well but its not working and not sure why.

I have a command button tied to this: ....

View 6 Replies View Related

Macro Not Responding To Cell Deletion

Nov 12, 2008

if column E is "Annuity", you can type a value in column J and it runs a formula to calculate a value for column K. If E is not "Annuity" it clears the contents of J (which should clear K). What's not working is when column J gets cleared or manually deleted, column K must be blank. The worksheet_change event is not working for deletion of column J.

View 5 Replies View Related

Endless Loop? (stops Responding)

Jun 15, 2009

Having another problem with the same macro that has been giving me trouble for a week now. Now, the macro will run, but after it finishes, excel stops responding. Is this because the macro continues to run indefinitely.

View 3 Replies View Related

VBA Code - How To Skip Macro While Not Responding

May 16, 2012

I have create excel VBA to put data from excel sheet to Server database through network. I create the VBA on the "Workbook_beforeprint" so every time the user print out the sheet, the code will run.

Problem occur when there is no network and excel application become not responding.

I want to make VBA code so that every time excel application become not responding because no network, this code will bypass the existing VBA and resume to print.

View 4 Replies View Related

Excel 2010 :: Keeps Crashing And Not Responding Or Saving?

Mar 9, 2012

I have a genuine copy of office pro 2010. All works fine except excel!

It seems to be mainly on one workbook I have brought over from open office and on a mac! It wont save due to errors it won't tell you about? It then stops responding or crashes? Wont save as etc....

I have repaired, I have even deleted and downloaded a new office pro genuine and installed and doing the same so i guess it has to be the file?

BUT it seems to work on another laptop we have, same file, same excel????

The only thing i seem to be able to find is in the permissions it has an "unknown account"? Also under the file menu where it allows you to check the file it states something about conditional formatting i have used and not being compatible BUT i cant for the life of me find that in the menus to get rid?

View 10 Replies View Related

Cells Not Responding To Left, Right, Center Arrangment

Jan 19, 2010

I think I did something but I don't know What. I select a cell that has a 20 font Size I enter a number it show at the 20 Font. Now when I go some ware else in the work unselecting that cell the number went to font 10 and droped to the left bottom of the cell. When I select the cell again and select the the left middle and right to move the number it does not responed. It happens everyware in the worksheet.

View 14 Replies View Related

Combobox Not Responding - Imbedded Directly In Worksheet

Jan 25, 2012

I am working on a macro that runs when a combobox is clicked. The combobox is imbedded directly in the worksheet, not in a form.

Basically, the user clicks the down arrow on the combobox, selects one of the available choices, and the choice selected is written to the spreadsheet - each time the selection is made, it is written to a successive row in the spreadsheet - keeping track of every selection made.

The macro works, mostly. But problem is that if the user repeats a selection in the combobox (makes a choice, and then in the next cycle makes the same choice) the macro doesn't run - nothing happens.

Here is the code:

Private Sub ComboBox1_Change()
i = Cells(2, 4) ' value in cell D2
Cells(i, 6) = Cells(4, 9) ' selected value from cobobox stored in cell I4
' This value copied to column F - successive rows
i = i + 1 ' counter to increment row for next value
Cells(2, 4) = i ' Update cell D2 with new i value
End Sub

View 4 Replies View Related

Workbook Causing Intermittent Freeze & Not Responding

Dec 31, 2008

I recently added some command buttons to 6 excel files each with about 20 sheets. most of the sheets got 6 new buttons. After I added the buttons I would get memory errors when I treied to open other files. So I upgraded to Office 2003 and Excel 2003 because I read that it had increased memory available. It did not seem to help much, and now on average about evry say 10 minutes Excel hangs for about 1o seconds, sometimes saying "Not Responding" up the top. Then it starts working again. MY PC has Server 2003 and 1GHz and 512MB of Ram. Here is some info:

=INFO("memavail")1048576
=INFO("memused")50769256
=INFO("totmem") 51817832
=INFO("numfile") 173
=INFO("osversion")Windows (32-bit) NT 5.02
=INFO("release") 11.0

I do not think the PC memory or chip is being stressed it seems to be Excel's memory?

View 4 Replies View Related

Form Controls / Objects / Images Disappearing Not Responding

Aug 10, 2014

My form controls (cmd buttons) and images don't appear or don't work. I was working on a macro to cut and paste a set of cells (protected sheet, I did unprotect it), and I noticed the cmd button tied to this disappeared. It then re-appeared but I couldn't engage it. This is part of a larger workbook that consists of a single page of cmd buttons that release specific worksheets (no activex). These buttons disappeared and re-appeared and don't work either. When I select the button I can see the cell underneath light up. It's like the image is there but nothing else?

The macros run fine from VBA editor. I was thinking the issue had something to do protections? There are more than 5 passwords (set on a worksheet) being used here, there is a fair amount of protecting and unprotecting going on, and I loop through the worksheets several times. Everything was working fine and now I'm stuck. I was getting a the-object-invoked-has-disconnected-from-its-client error related to an "insert cells" command on a co-workers computer, but not on my machine. This is actually what I was trying to solve when it crapped out. I would delete the buttons and create them all again, but I can't even select them to delete them.

View 5 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Change Event Causing Event To Fire Again

Aug 7, 2006

I have the following code, which works perfectly:

Private Sub Worksheet_Change(ByVal Target As Range)

Dim TotalDays As Integer

TotalDays = Range("C65536").End(xlUp).Row + 1

The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.

However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.

How do I add the following, to my previous code?

Range("E8").Value = Cells(7, 6) * 2.5

View 9 Replies View Related

Not Responding: Added A Formula To A Spreadsheet With Som Complicated Formula

Jun 1, 2006

I recently added a formula to a spreadsheet with som complicated formula. It worked ok and I saved the sheet. Now it takes 5 minutes to open the sheet and when I try to do anything,like delete the inserted column the program locks up giving a no responding message. I can do without this column if I have to.

View 4 Replies View Related

Print Entire Workbook Prints Pages Out Of Order And Makes Several Print Jobs?

Mar 26, 2013

All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.

View 1 Replies View Related

File Print In Legal Size If I Have 56 Lines Filled In Then Print In Regular Letter Si

Oct 15, 2005

I am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.

View 10 Replies View Related

Macro To Print Sheets With Value In Cell A1 But Print Dynamic Ranges On Certain Sheet

Sep 24, 2013

I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.

So far this is what I have but the dynamic range part is not working:

VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer

[Code] ....

View 3 Replies View Related

Excel 2007 :: Content Shown On Worksheet Different Than Print Preview And Print?

Jul 17, 2014

Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.

I am using TrueType Fonts.

View 8 Replies View Related

Excel 2010 :: How To Apply Print Titles To Print On Select Pages

Dec 10, 2012

Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.

View 2 Replies View Related

Print Previewed A Worksheet And Find A Tiny Image With A Small Portion Of The Print Area

Mar 27, 2009

I just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.

View 4 Replies View Related

Allow Users To Print Hidden Sheet But Not Change Print Settings

Jul 2, 2009

I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.

Private Sub btnPrintReturnForm_Click()

wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)

shtStaffForm.Visible = xlSheetVisible 'make staff form visible

shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved