I am trying to enter the following formula into cells on a worksheet change event but it errors out.
formula to input is: "=IF(H$10="",($H$8/12*K$8),($H$8/12*K$8)+H$10)"
I have used the following format to do this: ....
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
The following macro will put a checkmark in the range of A2:B100. I would like to use the current macro along with two or more other Worksheet_SelectionChange. One of the SelectionChange to put "Williamson" in the range of L2:L100 and another SelectionChange to put "Michaelson" in the range of M2:M100? Is it possible to use more than one Worksheet_SelectionChange
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Const WS_RANGE As String = "A2:B100" '
I have an excel sheet where I can enter a text into A4, when this is valid a checkbox1 will appear if there is no value then the checkbox is invisible.
I have used a macro 'worksheet selection change' to do this but unfortunately I can only use this once in a sheet. I need to do this for upto 10 checkboxs that corrospond sequentially with text starting at A4 for checkbox1, A5 for checkbox2 etc....
The routine I have used for one check box is below. Can this be changed for multiple checkboxes?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("A4") = isblank Then
CheckBox1.Visible = False
Else
CheckBox1.Visible = True
End If
End Sub
I am using Excel 2007, and I have a macro (that is working) that I would like to run whenever there has been a new selection in a dropdown list on my worksheet. I have done this many times before in other workbooks, and I have always used:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
To my knowledge this should trigger the macro when the dropdown selection changes. However, this time it is not working. The macro runs fine manually, but it does not run when the dropdown selection changes.
I have a cell that has a result which is the average of a few other cells (In this case the result is in cell Y7). I now want to take that total and put it in another cell to represent todays result..I.E. I have a list of this months dates and I want the todays result to be populated in the table. So I have a list of dates and the cell next to each date has the formula:
=IF(TODAY()=A24,$Y$7,"").
It populates todays result fine however the next day it blanks the result (since the cell is no longer todays date).
SO the question: How to I have todays result oerwite the formula so the result is permanent in that cell. I guess I am looking for some sort of PUT command to take the result and PUT it in another cell without that cell being a formula itself to GET the date.
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
In this file, I have a Work Summary worksheet in which I'm extracting some data from the other worksheets to "summarize" all jobs into one nice work summary log On Basis of Average of data from 3 other different sheets A,B,C
The following form works great to if onyl formula calling is applied
=AVERAGE(INDIRECT("'"&$C6&"'!c3:c7"))
C6 = Worksheet name or Worksheet tab name ....
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I've set up a binary matrix, such that I have 421 unique headings repeated twice: once in each column and once in each row (i.e., in the matrix the headings for row 5 and column 5 will trace back to the same description in the column headings and in the row headings).
I need to fill in 1s (case satisfied) or 0s (not satisfied) in this 421X421 matrix. Where my problem lies is in finding the exact row-column cell combination in which I need to enter the 1s. Descriptions that belong to the same group or category will be marked by these 1s in the matrix. For example, if I have descriptions 5, 9, 13, and 17 belonging to the same group I need to enter a 1 in each possible combination of these numbers: {5,9} {5,13} {5,17} {9,13} {9,17} {13,17}. I need a quick formula that will compute all possible combinations for inputted descriptions AND will enter a 1 into the cells, which correspond to these combinations.
I'm using the following code in a worksheet:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
col = ActiveCell.Column
Range("output") = ActiveCell.Offset(0, -(col - 4)).Value
End Sub
In case it's not obvious, the macro places the value in the active row and 4th column of the worksheet into the range "output".
The problem is, the worksheet is large and somewhat slow to recalculate. This macro forces a recalc on any selection change, but i only need it to run when the row selection changes, not the column.
I'm sure there's a straightforward way to reprogram this.
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.
View 1 Replies View Relatedi want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
If I type the digit "2" in a cell and then type "enter" the digit in the cell shows "4" instead of "2". Is there any explanation for this?
View 7 Replies View RelatedI want the entire row to turn green if a value is added/changet in anya cell in that row. I got the basics, but the macro changes color on the cell that is selected after the input, that is if I change A1 I want A1:J1 to turn green, but what happens is i change A1 and then select B5 than B5 turns grenn, I have tried to modify my macro but can't get it right ...
View 4 Replies View RelatedTextbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
Is there a way to make a cell change its fill color automatically whenever data is entered into that cell?
View 2 Replies View RelatedI am looking for a formula or VBA that will be in each in cells D5:D300 and will look at the value entered into the cell in column C and change the 4 digits into the date and time in the same format as NOW() returns.
Example
2045 becomes 17/02/2012 20:45
But I would also want it to see if the 4 digits that represent the time are after 14:00 and before 00:00 then the date would be the date in cell A1-1
example
Cell A1 18/02/12
2045 becomes 17/02/2012 20:45
Suppose I have a department List, and I made a list from that column (Department List), and I enter more staff and selected a department for them during registering, now one of the Department List Item change, How is it possible to change all the entry which has that department?
For more info see the attachment.
My user wants to change it so that, when the word "Triang" is selected from a dropdown box on each line the formatting goes back to none......or ClearFormats.
Can this be done with a Worksheet_selectionChange or similar.
I can't even get my head around this at the moment.
What the user is saying is, if the Formats haven't been cleared on certain lines, the user of the sheet hasn't addressed the needs for that particular line.
For r = lrow To 15 Step -1
If Range("M" & r).Value "" = True Then
Range("N" & r).Value = "Triang"
Range("N" & r).Interior.Color = vbRed
Range("V" & r).Value = "Triang"
Range("V" & r).Interior.Color = vbRed
End If
Next r
I'm trying to write some code where if the user hits the Enter key on a particular cell an input box pops up. At the moment I've got some code that activates the input box whenever the user selects or scrolls over the cell. The problem is that the cell is a protected cell (as it has a formula in it) so double-clicking isn't an option.....
View 8 Replies View RelatedI am using Excel 2003, my problem is that I have cells D4 & E4 with red text, when an entry is made in B4 (say $640, the amount can vary) I want the text in D4 & E4 to turn black. I have attached a section of the document in question.
View 5 Replies View RelatedI have a worksheet in which the values in cells B8, H37, H42, H48 and H49 must be negative. Occasionally the values get entered as positive numbers.
I would like to use VBA code to automatically change the value from positive to negative.
It appears that the WorkSheet_Change event could be used to do this but I don't know what code to enter into the Sub.
I am getting US formatted dates with this procedure, I require UK dates, but I don't understand why its giving me US format
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
If UCase(Sh.Name) "ALL BILLS" Then Exit Sub
With Target
If .Row > 5 And .Column = 19 Then
If Cells(.Row, "B") = "" Then
Else
Application.EnableEvents = False
Cells(.Row, "S") = "CLOSED"
Cells(.Row, "E") = Format(Date, "DD/MM/YYYY")
Application.EnableEvents = True
Range("E:E").EntireColumn.AutoFit
Range("S:S").EntireColumn.AutoFit
End If
End If
End With
End Sub
I would like to format a row of cells so that when a word is entered into the cell it automatically becomes a capital.
I need the word to be capitalized so that I can use it in a custom function. The function uses the word from this cell and goes through a bunch of cases in determing how to classify the string.
I think more than one solution is possible and I would greatly appreciate some feed back, I've tried looking into turning all the letters of a string in my VBA code to capitals, or a way to format the cells, so that the string is already capitalized when entered into the VBA code, but I'm still a novice at VBA and unsure on how certain commands work.
here is a sample of my vba code.
Function WeightI(Shape As String, sDim As String, dLenFt As Double) As Double
Const pi As Double = 3.14159265358979
Const Ft2In As Double = 12
Const dDen As Double = 0.2835 ' density of steel, pounds per cubic inch
Dim aiStr() As String ' dimensions as strings
Basically i have a list of 24 invoice #'s with cost/pounds/etc.
I need a macro that would look at a list from a sheet ( Temp Sheet ).
count the number of invoice
create a tab named the invoice numbers.
So basically, if there are 24 invoice #'s. I would have 24 tabs created that are named the invoice numbers.
