Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
I'm developing a local timesheet userform application and want to capture times which may be greater than 24hrs using a textbox/spinbutton pairing.
I've managed to pair up and work with times up to 24hrs but the output always resets after 23:55.
I've also tried formatting the output as "[h]:mm" but without success.
Private Sub sbDTime_SpinUp()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
Private Sub sbDTime_SpinDown()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.
Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub
I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).
I am looking for a formula or VBA that will be in each in cells D5:D300 and will look at the value entered into the cell in column C and change the 4 digits into the date and time in the same format as NOW() returns.
Example
2045 becomes 17/02/2012 20:45
But I would also want it to see if the 4 digits that represent the time are after 14:00 and before 00:00 then the date would be the date in cell A1-1
example
Cell A1 18/02/12
2045 becomes 17/02/2012 20:45
I am having difficulty trying to find a walkthrough or any other information on how to pair a spinner box to a textbox. Preferably I would like it to show 12:00 and move in 15 minute increments and I seem to be hitting many roadblocks and errors.
View 1 Replies View RelatedI need a few of my textboxes to not accept entries of greater than 40, Also need a message box warning to popup if this is done. I've seen some examples that are vaguely similar, but not quite what I need. I already have the following in place to limit characters:
Private Sub TextBox1_KeyPress(ByVal KeyAscii As MSForms.ReturnInteger)
Select Case KeyAscii
Case Asc("0") To Asc("9")
Case Asc(".")
If InStr(1, Me.TextBox1.Text, ".") > 0 Then
KeyAscii = 0
End If
Case Else
KeyAscii = 0
End Select
End Sub
Can I add to this or do I need a different sub?
I have a user form that has a combobox, two textboxes, and a button on it. When the form is loaded, the combobox fills with data from a worksheet I created. THe worksheet has a column with the item names, and another column with the quanity of each item. The combobox is filled with the item names. SO far I have this done. My issue is that when the user selects an item from the combobox, and enters a quantity in to the first textbox, and then clicks the button, I want the quantity in the textbox to add to the quantity cell that the part number from the combobox references to. Then I want this new quantity to show in the cell and the second textbox.
View 3 Replies View Relatediam trying to get a messagebox to notify the user that the text he has entered into the userform textbox is already in use in a sheets column. this is what i have been trying to get to work
Private Sub txtID_Change()
If Sheet3. Range("a8:a1000") = "B" & txtID.Value Then
MsgBox "Text already in use, Please use different text"
End If
End Sub
I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...
View 9 Replies View RelatedI have a user form with some option buttons (1,5,10,etc...) that are used so the user can select a given number of cells they want selected. My last option button is labled Other(optOther) and has a textbox next to it(txtOther).
What I am trying to do is give the user the option to either select one of the given numbers or be able to enter their own number. The data will then be extracted from one worksheet to another. I have all the coding for the optiong buttons with the given numbers, just cant figure the textbox one out.
My data starts on B5, so what i am trying to do is when the user enters number n, i would need data from B5:B(n+4).
This code repeats for each of my 18 UserForm TextBoxes. Is there a better way?
Code:
If Trim(Me.TextBox4.Value) = "" Then
Me.TextBox4.SetFocus
MsgBox "Enter a Score for #1"
Exit Sub
End If
How can I restrict entry into a textbox to 1 decimal place?
View 9 Replies View RelatedIf I enter into a textbox1 the following 09/31/2009 the result is that its not a date (because there is only 30 days in September - not 31). OR if I put in "13/25/2009"
Can I have a macro that checks whether or not its a valid date and if so a message box appears that says:
"Invalid date"
In my form I have the user enter in the current date in Textbox1. My program is designed only to work in 2009 so I want to check to make sure the 1) the date is in 2009 and 2) textbox1 is not empty. If it is empty then it displays a message box with "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" - this doesn't work. Second, if the date is outside of 2009 it is to display a meeage box saying "Date has to be in 2009".
Here is my current code which is not working.
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox1 = vbNullString Then Exit Sub
If IsDate(TextBox1) Then
Else
MsgBox "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" ...
I have a entry form in which i want to register customers. the first field is the customer number (which is unique(created by me) for every customer). This is TextBox 1 in the document. I would like to search for duplicates in worksheet 2, collumn A, when pressing "enter" to move from TextBox 1 to TextBox 2. A search for duplicates should start and a message should appear " duplicate found" if found, otherwise continue to TextBox 2 for further entry of information.
Please see my attached document for clarification.
I'm learning 'on-the-job' to code VBA macros and about a week ago I asked a colleague to test (UK/Australian) date entry into a textbox on a userform. I wanted to ensure users can enter virtually any acceptable date format. About 10 minutes after sending the colleague the workbook, she advised that inputting 29 February and a year that is not a leap year had the effect of showing the textbox date in reverse and transferring that date to the workbook with the year indicated as "29" eg. 06-Feb-29.
Since then, I've spent a good deal of time seeking a correction to the code. I've tried scripts for 'If IsLeapYear' with the 'MonthLength = 29' etc, various other if statements and shuffling the original date order of my code. The unadulterated code is below. Does anyone have an answer (other than an Error Handler with a msgBox, informing the user that the date format is wrong)?
Private Sub txtMonth_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
Dim dDate As Date
dDate = DateSerial(Year(Calendar1), Month(Calendar1), Day(Calendar1))
dDate = txtMonth.Value
txtMonth = Format(dDate, "dd-mmm-yy")
On Error Goto EndMacro
Exit Sub
EndMacro:
MsgBox "The date format you've entered is not a valid format!"
txtMonth.SetFocus
On Error Resume Next
End Sub
Dim lCount As Long
Dim rFoundCell As Range
Dim sfind As String
Dim cl As Range
Set rFoundCell = Range("A1")
For lCount = 1 To WorksheetFunction. CountIf(Columns(1), TextBox1.Value)
Set rFoundCell = Columns(1). Find(What:=TextBox1.Value, After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
With rFoundCell
End With
Next lCount.........................
this macro looks up in column A (a list of names) the name entered in textbox1 (of userform2). if found - the value is "copied" to E13. (if not - showes message - " does not exist") for example: it found the value "Dainna" (which was typied in textbox1) and copied it to E13. i want the macro to keep on to the next cell (in the row where Dainna's in- B3) and copy the age to F14.
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click()
Dim rownum As Integer
rownum = 2
'Prompt user with message box asking for input in both text boxes
If Me.txtNumber = vbNullString Then
response = MsgBox("Please enter a Work Number", vbInformation)
Me.txtNumber.SetFocus
Else
' Insert the work no., driver, locker, keys issued & keys On hand
ActiveCell = Me.txtNumber.Value
ActiveCell. Offset(0, 1) = Me.txtLocker.Value
ActiveCell.Offset(0, 2) = Me.txtIssued.Value
ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I have a row of dates in row 2 (all sequential, from Nov through to June next year)
I have a row of number entries in row 3 (to correspond with the date in row 2 it was entered on).
I want to be able to add a new entry (a number) into a text box, click a macro button, which makes the text box input be moved into the cell underneath todays date (so every day the cell will move one column along)
I've managed to make myself a textbox, and a macro button, but I'm stuck with how to make it all work.
I have a sheet that I enter time into in a 24hr time format, ie Military Time and cant figure out how to format the cell so that I can just type in the numbers and it automatically put it in the hour format. Currently I have to type in the hour then the colon the the minutes otherwise if I type in the time in a three or four digit format it just gives me 0:00.
View 9 Replies View RelatedIf I type the digit "2" in a cell and then type "enter" the digit in the cell shows "4" instead of "2". Is there any explanation for this?
View 7 Replies View RelatedI have tried to make a VBA that would allow me to type in:
10657 and have the VBA to automatically convert that into a timeformat -> 1:06:57.
It works ok as long as the typed number is 4 digits or shorter.
If i type 12345 I would expct to get 1:23:45 but I get 00:00:45
Private Sub Worksheet_Change(ByVal Target As Range)
Dim VaValue As Variant
TCol = Target.Column
If Not (TCol = 5 Or TCol = 6) Then Exit Sub '
I'm creating a spreadsheet where a test note taker needs to repeatedly enter the date/time code in a column as events occur.
I tried recording a macro that will enter the =now() formula and then copy that over itself with the value but didn't work.
So now I'm thinking I need to just write code that will determine "now", and write that serial value to the next open cell (with care not to overwrite the previous data point). I'd like to execute this with a simple keystroke.
The thought is to start at the top of the column, go down until the next blank cell is reached, insert the time code (can't be a formula that will change but an actual value).
I have a cell that has a result which is the average of a few other cells (In this case the result is in cell Y7). I now want to take that total and put it in another cell to represent todays result..I.E. I have a list of this months dates and I want the todays result to be populated in the table. So I have a list of dates and the cell next to each date has the formula:
=IF(TODAY()=A24,$Y$7,"").
It populates todays result fine however the next day it blanks the result (since the cell is no longer todays date).
SO the question: How to I have todays result oerwite the formula so the result is permanent in that cell. I guess I am looking for some sort of PUT command to take the result and PUT it in another cell without that cell being a formula itself to GET the date.
I want the entire row to turn green if a value is added/changet in anya cell in that row. I got the basics, but the macro changes color on the cell that is selected after the input, that is if I change A1 I want A1:J1 to turn green, but what happens is i change A1 and then select B5 than B5 turns grenn, I have tried to modify my macro but can't get it right ...
View 4 Replies View RelatedI've got a spreadsheet set up for a simple barcode scanning system. The user scans the barcode of the product when complete, and it logs it to a sheet along with a date & time timestamp. I'm then planning to use a v-lookup (barcode to product name) & pivot-table to count instances of 'product name' so that I can monitor what is being produced easier, nothing too tricky.
The problem I'm having comes from the products of the same spec having the same barcode, so data validation is hard to apply, as I can't 'not allow dupes' - the concern I have is that if the user unknowingly (or knowingly!) scans the same ticket twice, I think I've got 2 of a product when I've only got one. The idea I had was to lock all cells for a set time period (say 1 minute) after an entry so that it couldn't be accidentally scanned twice.
I want to be able to type a 24 hour time into the column and have it format with colons - for example: I want to type 123456 and have it show up as 12:34:56
View 5 Replies View RelatedHow can I get an automatic time & date entry into cell B1 based on a alphanumeric entry in cell A1. The time and date must not re-calculate every time the workbook is opened.
View 4 Replies View RelatedI have entered VBA code and tested it with success. If I then save & close the excel file and then re-open it, the mask time entry is not saved (time does not appear correctly after input) and per instructions I have designated (and am using) the cell input range.
View 9 Replies View Related