A Forumla To Look At A Year And Month And Return A 1 If Match Found?
Apr 3, 2014
In cell b2 I have a formula =text(today(),"yyyy") which daisplays todays date as a year, in cell b3 I have =text(today(),"mmmm") which displays todays date current month.
I have a column of Months and Years
January 2014
February 2014 etc
I need todays (current) month and year to indicate in a helper column next to the relevent month and year as a number 1 to use as a reference to return date from the row where the 1 is displayed, I have tried =if(and(b2=a10,b3=b10),1,"")) and it dosent like the fact that the year in the colmuns is entered as standard text, is there any whay to do this?
I have a workbook that uses several indentification fields one for Job ID, One as a subID which occurs for every part of a job, i am currently using formula
My workbook has a worksheet that lists service activities and a 2nd worksheet that contains a month-year column and an associated Customer PO# to be assigned to an activity based on its Open Date...if it is a specific type of activity.
My logic statement is IF activity type RO is "X", then match its Open Date to the Month-Year in the AssignPO# sheet and assign the associated Customer PO.
I've attached a sample workbook to make it simpler to understand.
So I use this formula on one of my task sheets to do budgets. Now the problem is we are entering 2014...yet the formula won't go into the next year without some sort of year scan:
that is the first formula but I need it to look up the year also and everything I have tried has failed miserably. So basically when it is matching with the month I have a drop down that has Jan-December...but I need it too look to the Feb 2014 not Feb 2013...How can I add the year section?
The '085' is the 85th day of the year. I would like a formula that reads that part of the data, and return the month that day is in, in the "jan", "feb", "mar", etc. format.
I have a value that has a whole number and a decimal. From this number I need to figure the Year and month. The worksheet has constant values from which this can be determined.
formula off here i use all the time relating to finding and sumproducts for specific months and years i.e.
Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula...
is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009?
The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I am trying to compare a single cell's Value in 1 worksheet to try to find a match in another column (or a range of cells). If I find a match I want the result to be a 1 and if it is not found then a 0.
I need to pull data from Column C by looking at Column A. However it's not as simple as that. Under Column A, there are various fields, the first number represents a type of product and under what year it is currently in. So "300100" would represent a 3 yr product that is in it's third year, "210000" would be a 2 yr product in it's first year and so on. The problem is that when I pull data from the DB, some 3 yr products are flagged as products that are in their 4th or 5th years, which isn't possible. So I created an IF statement that takes this into account and ignores illogical combinations.
As you can see, I don't have the conditions "500010" and "500001" because it won't fit into the IF statement. Is there another way to go about doing this task? I've searched up the forums and someone recommended using the IF statement with VLOOKUP but I don't think it works in this particular case since I have 10 conditions.
I want to use a COUNTIF to return the sum of all the dates that fall within a given month/year. For example: E1 Contains the date July-2009
Column A has date entries such as July 3, 2009, July 18, 2009, August 4 2009. In F1 I want to return the sum of all dates that fall within the month of E1.
I have a workbook with two spreadsheets in it. On the second sheet there is a large table, which column headings are months and years (e.g. Jun-07 Jul-07, Aug-07, Sep-07....). I was trying to write an excel vba code that would search the first row (column headings) to find the current month and year, and copy the corresponding column along with two previous columns (months) to the first sheet. I would like to have a code that will be able to do this in Jan-08, Feb-08, or Jan-09 as well.
If lookup doesn't find a match in the first column, can I get it to return an "ERR" or "0", something that would let me know there was no match? Right now it returns the value in the second column of the closest value.
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
see attached workbook. I want VBA to insert an index/match forumla on sheet 1 to lookup a value from sheet 2. I don't want it to specify a range though. I want VBA to look to see if there is data above and to the left of the cell and if it is true insert the index/match formula. Then it won't matter what row or column I put the headings in.
