ThisWorkbook.Sheets(2).Cells(nrow + 1 + j, 2 + high_count).Formula = "=VAR(" & ActiveCell.Offset(0, n_high_count -1) & "," & ActiveCell.Offset(0, -1) & ")"
*n_high_count is the negative of high_count
I want "ThisWorkbook.Sheets(2).Cells(nrow + 1 + j, 2 + high_count)" to have the formula "=VAR(XX:XX)" where the range is the current row second column to the current row current column -1.
I need to make the active cell go to the beginning of the row (Column A). I tried setting up a variable to be the row.value, but that didn't work (the way I wrote it, which doesn't surprise me).
View 6 Replies View RelatedI have 2 columns of data
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc
column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
ActiveCell + 9 columns.Interior.ColorIndex = Yellow
There has got to be an easy way to do this.
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
Get value from another cell using Offset and active cell. I can do this in VBA but I cant seem to do it on a worksheet.
View 4 Replies View RelatedThats the best I could describe that What I face today is the means to run a VBA Autofilter from an Activecell. The Activecell is a search result. I have a table that spans from A1 to E5000. The Activecell will always be in Column A. What I need to happen in when the Activecell is found an Autofilter is placed in the block of data from Column B to E. The rows will change after every search hence my dilemma. Each block of data has its own header as well
So if my Activecell is A2 then I need B1:E4 Autofiltered then Column E sorted Smallest value to Largest. The Activecell needs to remain static. The size of the blocks of data are exactly the same.
Here is a photo example of the desired result. Untitled.jpg
There are hundreds of blocks of data like this.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm‎
I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
With C
If IsDate(.Value) Then
.Offset(0, 3).Value = Format(.Value, "yyyymmdd")
Else
.Offset(0, 3).Value = Right(.text, 4)
End If
End With
Next C
which is supposed to read the cell offset 3 to the right, and then set to either YYYYMMDD or YYYY depenig on the value in the cell. I'm not sure how to specify the first part of this line - .Offset(0, 3).Value = Format(.Value, "yyyymmdd") - it keeps reading the cell in column A, rather than the offset cel.
how to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!
the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * $B$1)
I'm trying to do a column of individual discount calculations using a discount percentage found in a cell two to the right of a cell containing the text "Total SP:" that is always upwards and to the left of the cell where the formula goes (but could be two rows or could be 20). There are multiple "Total SP:" cells in the sheet - I always want the first one upwards. I have created the following but I get #NAME? where I hope to see the discounted value.
VB:
Dim Discount1 As Double
Discount = Cells.Find(What:="Total SP:", After:=ActiveCell, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=True).Offset(0, 2)
Range("R9:R" & LastRow).Formula = "=IF(J9>0,$E9*(1-Discount1),0)"
I've just thought, the Cells.Find needs to be redone for each cell where the formula is inserted to ensure it always catches the correct discount and this isn't going to do that - it's going to find it once and always use that single value.
I think this needs a Loop or something and to move the ActiveCell down one after the formula to get it to redo the Cells.Find.
I'm trying to look at a value in one column (Column A) and if it matches a set of criteria, I'm trying to change the value of another cell 6 columns to the right.(Column G) I've been trying for a couple of days now to get this working, but to no avail. I've tried to modify the code below that I've found on this site but can't quite figure out what I'm doing wrong.
Sub RatingsFix1SP()
Dim FindWhat, rngCell As Range, i As Integer
FindWhat = Array("BB", "B", "CCC", "CC", "C", "CCC+")
For i = 0 To 3
For Each rngCell In Range("A2", Range("A" & Rows.Count).End(xlUp))
If InStr(rngCell, FindWhat(i)) <> 0 Then
rngCell.Offset(0, 6) = 0.15
End If
Next rngCell
Next i
End Sub
To try to clarify a bit: If column A in the attached spreadsheet has a rating code of BB, B, CCC, CC, C, or CCC+, I want the Haircut % rate in column G to be 15%. It seems the code that I'm using changes the % rate to 15% if any "B" or "C" shows up in any part of the string in column A.
I'm using the code below to perform the following:
Compare a column of project end dates (column G on the "In Flight Projects" sheet) with the dates in a row of column headers, and Where there is a match, count the number of projects which are being worked within that given month.
[Code] .....
The code works fine, but I'm having a little difficulty in making an amendment to the code:
In the following section of code I need to select the Range ("G8"), but then say if the value in the cell, offset minus 4 has the value of "C&R" then run the rest of the script :
[Code] .....
I've made the following changes, but I'm unable to get this to extract the figure despite not receiving any error message:
[Code] ....
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
Is there any way to use the offset formula in reference to the location of another cell?
Here is a simplified version of my problem:
Sheet1!A1 refers to Sheet2!A1.
Sheet1!B1 refers to Sheet2!D1.
Sheet1!C1 refers to Sheet2!E1.
Is there any way that I can say that Sheet1!A1=Sheet2!A1 and then use the offset formula based on the location referenced in Sheet1!A1? The cells being referenced are merged cells one column wide and varying rows long, so there is no real pattern to follow except that the corresponding cells (the ones that I want to use the offset formula on) are all taking up the same amount of rows and are an equal amount of columns over (Sheet1!B1 refers to 3 columns over from Sheet2!A1, Sheet1!B1 refers to 4 columns over from Sheet2!A1). The spreadsheet is a fairly complex one and it would be much cleaner and less likely to have any mistakes if I was not referencing each cell individually.
I am looking for a vba to offset the cells.
The code I have currently is:
[Code] ........
This is only moving the selected cells across one, however - the content of the cells is what I wish to move so cell C25 has data pointing to another sheet cell A1 i.e. =Sheet1!$A$1 - can I edit this code so it alters the cell to reference B1, C1 etc....
I am trying to determine a cell row thru which I want to sum a column based on date. For example, if today is in the month of December, the offset is row 87. When the month changes to Jan 09, the offset will be 88.
I have the formula which does this for me, but I am not sure how to use it in the sum formula. So if I want the sum for December, it would be =SUM(K18:K87) and Jan would be =SUM(K18:K88). Here's the wrong formula:
=SUM(K18:K&(ROUND((TODAY()-39783)/30.35+87,0)))
What I cannot get is how to properly format the formula so that the :KXX increments based on the formula. I tried this: =SUM(K18:K(ROUND((TODAY()-39783)/30.35+87,0)))
but get a NAME error.
Cell offset within macro
I have a very basic macro controlled by a button as follows
I have a selection that I am going through with a 'for each' and then performing actions if the cells meet a certain criteria. I have been referencing nearby cells with the offset function, but now my sheet is too big and I need to change the code often and the offset function is difficult, is there anyway to refer to cells without the offset function, preferably by column letter
PHP Code:
For Each Cel in SelectionIf Cel = x Thenvalue1 = Cel.Offset(0,39).Valuevalue2 = Cel.Offset(0,5).ValueEnd IfNext CelÂ
Is there a way to use the offset function with a cell reference for the first reference?
I have many columns of named ranges, each representing a month of financial statement data. I want to pull up certain cell values based on the months being compared.
For instance, if the user selects "May", I want to pull only the sales data for May 2013, May 2012 and May 2011. That data is in the 311 row of the columns for each individual month.
=OFFSET(ytdmay2013,311,0,1,1)
In short, I am using a vlookup to get the ytdmay2013 based on the chosen month of May in the input section. If the user then chooses June, the lookup will return ytdjun2013. I want to link the ytdjun2013 in the offset function.
The Sheet below is an example of what I need to fill in daily
In column B I have the week commencing date (ie the Monday)
When the sheet is opened, I want the approriate day to be selected (ie the day before the current day)
Eg. if today is Friday 16th November, when the sheet is opened I want the cell for Sales on Thursday of the week which begins with 12/11/07 to be selected ie L5
If today is Monday 26th November i want Sales on Sunday of the week which begins with 19/11/07 to be selected ie U6 ....
This is in regards to this script:
Set range = Sheets("VTOL").Cells(Rows.Count, "A").End(xlUp).Offset(1)
Loc = ws.Name & "!" & Range("O1").Address
ActiveSheet.Hyperlinks.Add Anchor:=range, Address:="", _
SubAddress:=Loc, TextToDisplay:=ws.Name
It adds sheets it finds starting at cell A2. But I actually want it to start at cell A3.
I'm drawing a blank here.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.