I have a workbook with a function that has work just fine for the last year. it calculates prices of various orders. I have added a module to post the amounts to a database and the formulas all turn to #VALUE.
View 7 Replies
I am trying to get VBA code in Excel to copy formula in specific cells to copy the cell below when an entry is added to a database.
View 3 Replies View RelatedEvery so often I get a spreadsheet form some one else, and when I start to edit it formulas turn immediately into values.
For example, I enter a =10/2 ,when pressing enter, the cell displays correctly the result, 5. But when I click into the cell, instead of having the formula
=10/2, the only value inside is 5.
How do I keep this happening ??? I want the cells to keep the formulas.
I used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
View 3 Replies View RelatedAll I am doing is counting text values in a table.
The table has 3 main columns(which are relevant to this thread anyway).
Shift - Area - Status
The example I have attached shows examples of DCOUNTA, SUMPRODUCT and a Pivot Table.
I have read many threads stating that the best one to use is Pivot Table followed by DCOUNTA followed by SUMPRODUCT.
The most effective for me seems to be SUMPRODUCT (although this does slow excel down dramatically when you use a lot of these formulas). As do Array Formulas
The Pivot Table does not update on its own, therefore constantly needs to be refreshed. (I could use code to do this)
The DCOUNTA seems to be the least effective at doing what I want (unless I am doing something wrong)
In the attached example can the DCOUNTA be used more efficiently as I don't like the fact that I am duplicating rows to apply the criteria for a different shift. e.g
Area 1 - Late Shift - Banned
Area 1 - Early Shift - Banned
I want my table to be as follows (as the SUMPRODUCT shows)
AREA - Early Shift - Late Shift - Night Shift - Area Total
Area 1
Area 2
Area 3
Area 4
Area 5
Shift Total
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
View 5 Replies View Relatedi'm trying to get data added in one sheet of a workbook to automatically be entered into another sheet. such as a monthly, Quarterly and Annual balance sheet.
View 3 Replies View RelatedAfter all the awesome macros I've obtained with the help of all of you, I now have over 30 macros, each in its own module. I have tried without success to re-name the modules with no luck. How is everyone organizing these?
View 2 Replies View RelatedI have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
Let's say i have 2 Modules on my VBA forms, is it possible to Copy all the Codes in Module 1 and Paste it to Module 2 by using a Command Button?
View 1 Replies View Related i got a question how i can make a msgbox in one module with 'Yes' linking to a different module.
such as: this is located in module2
Code:
If MsgBox("Do you want to activate module1?" & vbCr & _
"" _
, vbYesNo, "Choose") = vbNo Then Exit Sub
i want that vbYesNo different
No as in Exit Sub
yes as in activate Module1
What i have at the moment is a module that contains code where i call a different module that i use as a procedure.
Module1
Code:
If Sheet1.Range("C4").Value < Sheet1.Range("A2").Value Then
If Sheet1.Range("K4") = "" Then
MsgBox "Please check 06:00 tasks not done yet!"
Cell = "Range(" & Chr(34) & "F4" & Chr(34) & ")"
If Sheet1.Range("C4") + 0.042 < Sheet1.Range("A2") Then
Run "EmailProSheet"
End If
End If
End If
EmailProSheet is what i call but now i want to use the variable "Cell" in the procedure as well?
Module3
Code:
MsgBox Cell
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[Code]........
As it is now everything is working fine but does not return a value in "Cell" if the procedure is called. Is there another way?
I recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
I am currently trying to create a database of products for my company. For each product I would like to include an image associated with it. I then want to have on another sheet a place where the user will click an error and be able to cycle through the products. As tehy cycle the associated image will pop up.
What I need to understand is after importing the image into excel, how do I associate that image to a cell so I can reference it in another sheet of the database. I am not concerned with how large the database will get, my pictures are quite small.
I'm trying to lookup a database named database and return a time in column A, based on criteria in cells a1 and b1 on another sheet, A1 would contain a number and B1 would contain a day from mon-fri
eg of Database
A B C D E F G
10:00 5000 Mon Tues
11:00 5000 Wed Thur Fri
and so on
if a1= 5000 & b1=Wed
how can I return 11:00
I have tried index and match =index(a:a,match(a1&b1,b:b&e:e,0))
can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedI've used a countifs, but I'm having trouble doing a sum in a similar way. I have 2 databases and I will try to explain below. I need the to sum the values of database 1 if the second database is >= 20. So the value I would expect on this example would be 900. I would also like to be able to highlight which ones are elliminated. Such as coloring the text red.
Database 1
Eric 100
Jenny 200
Gina 300
Doug 400
Database 2
Eric 18
Jenny 20
Gina 34
Doug 55
We have created a macro that basically looks for rows that contain an "H" and hides the row if it does.
Users can add new rows throughtout the year to this spreadsheet. and based on certain criteria, an H or U will be placed in a hidden column which the macro looks at and hides any row it finds an H.
The user has to click on the button that has the macro assigned to it once they have finished working on the spreadsheet.
The problem we're finding is that for users who insert/delete rows, once they click the button it takes up to 15 seconds to run through macro (which is ok). However, users who haven't added or deleted any rows and who click the button, they have to wait upto 5 minutes (which isn't ok) for the macro ro run.
We can't figure out why the macro takes longer to run when no changes have been made?
I M doing SUMIF correct on the below but it seems not to be adding up correctly. Can anyone point me in the direction of where I'm going wrong?
What I am trying to do is sum up the amounts in D if A equals C, as you can see in C their are numbers that appear twice so I don't know if this is a problem. I thought the sum =SUMIF(D:D,L:L,M:M) would sort this but the value I get for 59846(A) is 3665 which is on number 66336(C) so obviously doesn't match as this should be 1211.25........
In my file i can insert text to a certain cell and column but this is for one entry only. I am wishing for a run that for every entry, there is a new row.
Here's my file sample project.xlsm
You can see there the user form for a post entry. The user should fill-in code and description and if he hit save, the code and the description should be recorded on list provided the sheet.
I'm not that clued up on VBA or macros but I do have a few i regularly use, I’ve found a thread related to my problem but cant make much sense of it.
Basically i want to post the 3 cell values (C5,C7,C9) into row B20,C20 and D20 respectively. However I want these values to form a list staring with row 20 and working down onto the next available/empty row.
Marking My Post As? How do i mark my post as solved?
View 5 Replies View RelatedThis year we need to display 2 types of VAT in every invoice. So any listed product in the invoice could have either 5% VAT or 18% VAT depending on its category. At the end of the invoice i need to separately express (show) the total for 5% VAT and total for 18% VAT.
View 3 Replies View RelatedNot sure how too do this, here is a simple example of what I want too do. Just using different buttons to post a number.
View 6 Replies View RelatedI have a list of UK Post Codes that I wish to filter but because of the format I'm getting problems.
The reason is that I'm only interested in the first part of the post code.
Example: Using IP7 6NH and IP32 8LR. If I tried to filter those using greater than then Excel would treat IP7 6NH as larger then IP32 8LR because 7 is larger then 3.
The post codes are all imported from another piece of software and are always in the format of 3 or 4 chracters, then a space and then 3 more chracters. I wish to create another column which only has the first part in it. So I wish to crop IP7 6NH down to just IP7 and IP32 8LR down to just IP32.
Then I want to make a further column which looks at the value in the first new column and returns "In" or "Out" based on some conditions.
These are the conditions. If the cell begins with CO or NR or CB or CM or PE, regardless of the rest of the value, then "Out" should be returned. If the value is between IP1 and IP6 inclusive then "Yes" should be returned.
If the value equals IP7 then "No" should be returned
If the value is between IP8 and IP17 inclusive then "Yes should be returned.
If the value is between IP18 and IP29 then "No" should be returned.
If the value equals IP30 then "Yes" should be returned.
If the value is bewteen IP31 and IP33 inclusive then "No should be returned"
I'm think that it's quite complex and maybe the way to go would be to have two other columns, one containing the "In" values and the other containing the "Out" values, that a formula can refer to when making it's yes or no choice but I don't know how to do that.
I may have missed it, but I can not seem to find where I can customize Excel to add a "paste formula" button. (I have a fair amount of copying to do where I do not want the formats being changed at the same time.)
View 9 Replies View RelatedI have the following code. It takes data from one sheet and inputs into another. When I enter a Customer ID in cell G12, starting on Row 18 and proceeding down, jobs are listed. When the macro posts into the history sheet, it posts the jobs in rows. I wish for each time I run the macro, the info is all in the same row whether theres two jobs or 20 for that customer ID. Right now it is posting like this (two jobs listed):
CustID(G12) | Name(B12) | Address(B13) | Job1(A18) | Job1Date(D18) | Job1Price(G18) |
CustID(G12) | Name(B12) | Address(B13) | Job2(A19) | Job2Date(D19) | Job2Price(G19) |
Im trying to make it look like this:
CustID(G12) | Name(B12) | Address(B13) | Job1(A18) | Job1Date(D18) | Job1Price(G18) | Job2(A19) | Job2Date(D19) | Job2Price(G19) |
Sub InvoiceUpdateHistory()..................
Is there a way with a formula to have a result of one cell pasted in a different cell? ie. C1's formula =if(and(isnumber(a1),isnumber(b1)),b1-a1,if(and(isnumber(a1),isblank(b1)), b1 = d1,"")
A B C D
12/18/06 formula above =today()
if b1 isbalnk it will copy the value of d1 to b1. I dont know if this can be done i have looked at offset and a few others but it doesnt look like this can be done but want to see if i have over looked domething
If the user clicks on a cell within a specified range ("DataEntryWindow") which contains formulas, I want the formula RESULT to be copied on to the formula bar for that cell (not in to a cell) - the user can then press enter to replace the formula with the result, or escape to cancel
- you can do this manually by copying the cell as values to another cell, then copying that value to the clipboard letter by letter, then clicking on the original, clicking F2, selecting all the formula text, then pasting the clipboard!
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("DataEntryWindow")) Is Nothing Then
curval = Target.Value
Application.SendKeys "{F2}"
'Application.SendKeys "???" ' some keyboard combination to go left, left, left
Application.SendKeys curval
End If
End Sub
Needless to say, it doesn't work. sendkeys seems to do nothing at all. is there an object in worksheet for the formula bar that i can paste to?
I can use help creating the following forumla.
In column "A" I have Dates of Variances. In column "E" I have the variances for those dates.
On another sheet I need variances between certain dates. For example, get all variances between the dates 03/28/09 - 04/28/09.
