Every so often I get a spreadsheet form some one else, and when I start to edit it formulas turn immediately into values.
For example, I enter a =10/2 ,when pressing enter, the cell displays correctly the result, 5. But when I click into the cell, instead of having the formula
=10/2, the only value inside is 5.
How do I keep this happening ??? I want the cells to keep the formulas.
I have a workbook with a function that has work just fine for the last year. it calculates prices of various orders. I have added a module to post the amounts to a database and the formulas all turn to #VALUE.
View 7 Replies View Relatedis there a way or a formula that turns numbers into their respective words:
ie Cell A1: 8500
Cell A2: Eight Thousand Five Hundred
Big ask I guess but its for a banking model so I can't be the first to have considered this
I have 1 column of pasted values that basically look like this
c
1:a
2:b
3:c
1:d
2:e
3:f etc...
And they need to look like this:
c1 c2 c3
a b c
d e f
I know how to separate the first column into two columns by separating the values by the colon. But how do I rearrange the values as above and combine all "1"s in c1 so it becomes the headers and the column is populated only with the values? The table is too big to do manually (thousands of rows).
I need a macro to turn to values all formulas in specific columns only. For example column C, F, I, L,O,...until column UYG, always with the interval of 2 columns.
View 1 Replies View RelatedI'm creating several dozen charts all using Logarithmic Scale and while I know you aren't supposed to provide Zero values in the source data this is one project where that can't be helped. My problem is that the Excel Alert keeps popping up to tell me I shouldn't use zeros and it keeps crashing my sheet because it pops up every 10 seconds or so.
My question is: Is there any way to turn off an Excel Error Alert? OR Is there any value I can place in those cells (other than Zero or One) that would stop that troublesome alert from popping up? Just for reference, this is the alert: MICROSOFT EXCEL
Negative or zero values cannot be plotted correctly on log charts. Only positive values can be interpreted on a logarithmic scale. To correct the problem, do one of the following: * Enter only positive values (greater than zero) int he cells used to create the chart. * In the chart, click the axis you want to change. On the Format menu, click Selected Axis. Click the Scale tab, and then clear the Logarithmic Scale check box.
I have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
ok lets say you have thousands of rows of raw data and you are running vlookups to pull specific data from the raw data to update your spreadsheet. Your raw data consist of some new ideas so when you vlook up, you get an error. In my case i get about 50 errors all spaced out amoung the thousands of rows or raw data. I would like to create a formula that would go and find the error and output a code/value that already exist in the raw data and output that in Cell D1 for example. The it will go and find the second error and output that into cell D2 and then the third error and output that into D3 and so on.....
The idea is that when its done a list of all the errors will have been created so then i can use other formulas to simple add the new info to the workbook. Instead of search through thousands of rows for the errow.
I have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedI am working with an Address Worksheet where the house#, street name and street type are 3 seperate columns. I need to combine that data into one "Address1" column. I can use a Concatenate() formula to combine the data, but I need to be able to have that data output to a new column, independent of the formula.
The problem that I am having is if I try to "copy" the concatenated data to either a new column or new worksheet it only wants to copy the formulas. I don't need the formulas anymore, I need the data.
I have a estimating workbook with a number of worksheets to provide a estimating process. this includes the final worksheet with the estimate on.
This is fine if i am printing it to send to the customer or sending as a PDf.
However i need to save as a stand alone excel workbook. But all pre-formated and only with the values in it and not the formulas. It would be easiest for the users if it could be done with a button on the quote sheet (ie done with as macro as some users are not very IT literate and do mess up).
How pasting values/formulas only works. I have a spreadsheet I've been using to record product sales, commission, shipping etc. It currently has three pages of records. But now I have a new spreadsheet I want to use with basically the same 'look' as the old one (same columns, entries per sheet, etc) but using better formulas. I don't want to manually input all the data from the old one and I thought I could copy all the cells from the old one and then paste values only into the new one. But when I do that, it pastes the values but also deletes the formulas in the new one. So then I thought I could copy all the cells from the new and paste only formulas into the old one but then it deletes all the values in the old one. Is this what is supposed to happen? And if so, is there a way to achieve what I want?
View 1 Replies View RelatedHow can i change this code to paste values not formulas?
Code:
Private Sub Admin_Click()
Range("BO40:CI73").Clear
Dim rng As Range
[Code]....
I need to ignore all data in a row (it won't be averaged, summed or anything else) if a particular value in that row is "0". I need to be able to see it but just not have it counted. Change the 0 to something else and all the data in that row is included in formulas as usual.
View 9 Replies View RelatedI have a column of values (Sold Price) for which I need to figure extra fees related to that cost, but they vary depending on the cost. The different fees associated with the Sold Price are:
A. If SP is $.01 - $25, fee is 10% of SP
B. If SP is $25.01 - $100, fee is 10% of 1st $25, plus 7% of remaining balance
C. If SP is $100.01 - $1,000, fee is 10% of 1st $25, plus 7% of next $25.01 - 100.00, plus 5% of remaining balance over 100
So I need one formula to go into the fee column which will work with all values of the SP column.
I have a product mix values as below. I want to convert the values into the % of total product mix.
CREATE TABLES LIKE BELOW?
----G---- ----H---- ----I---- --J--
4 Product A Product B Product C Total
5 32 73 125 230
6 14% 32% 54% 100%
I am trying to concatenate the values of many cells, not the formulas in the cells, to avoid having to repetatively paste special, value. Perhaps something like this: =CONCATENATE(VALUE(AA2):VALUE(AQ2))
View 3 Replies View RelatedI work for a bank and we use an excel spreadsheet that has an in depth payment calculator used for creating monthly payment arrangements or calculating settlements on bank loans. I would like to add the following feature and I'm not quite sure exactly how to do it.
For example, imagine cell A1 will contain the full payoff of a loan. I want to be able to put a settlement offer in B1 and have C1 populate the percentage of the payoff that is. At the same time, I want to be able to delete the settlement offer in B1 and put a percentage in C1 and have it calculate that settlement offer in B1. The calculations/formulas to do these problems is simple, but what I need is to not lose the formulas in B1 and C1 if I were to go back and forth entering settlement offers vs settlement percentages.
I have this code:
[Code] .....
I want only values to be copied, not formulas.
I am trying to copy data from an employee worksheet into a database that tracks the history of that data when they click submit. Everything is working well, except I can't figure out how to change the code to copy and paste values instead of the formulas.
View 2 Replies View RelatedIm looking for code to add new rows and copy the formulas only (not values) into the cells A, B, C, D and F. I have found code that does this in various places online but in every case I have found they duplicate the row then remove the values (so the formulas are left behind). The issue I have however is that it triggers some change event code I have on the sheet which interrupts the process.
Is it not possible to simply insert a new blank row, then copy down the formulas only without values?
I am copying the value in a cell to another sheet's cell. I want to convert the formulas on the second sheet to reflect their value. I do this all the time within cells by using Past Special and Values however it doesn't give me that option within the Text Box
View 2 Replies View RelatedI have the following macro that copies data from a calendar-style setup on one sheet and pastes it in a contiguous list on another sheet:
Code:
Option ExplicitSub move_daily_data_to_ordersvstips()
Dim OutSH As Worksheet
Dim findit As Range
[Code]....
I would like only the values from the "Data by Month" sheet to paste to the "Orders vs Tips" sheet. However, all my attempts are returning various errors/inconsistent results.
I've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:
=IF('Final'!A5='Original'!A5, "-",'Final'!A5)
The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.
Is it possible for the IF function to search the formula in a cell, and not the value?
i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.
i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...
found a great macro which copies data from multiply worksheets and pasts them onto master sheet.
I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.
I am trying to find a way to search for specific cell formulas (not the values they produce). For example, how could I search an Excel tab for a cell containing "= sum()" ? I want to ignore all other formulas and values. I then want to replace this formula only with its value.
View 4 Replies View RelatedI currently maintain a program that creates an Excel report. The report is full of formulas (mostly vlookups).
After the report is built, I'd like to get rid of the formulas. The only way I know to do this is to copy the report and do a paste special values.
I have what I thought was a very simple task; Change all date formulas in the workbook to values. I've accomplished this, but I was wondering if someone had a better way of doing without so many loops (I used two). NOTE - Dates are on different sheets within the workbook. I've tried setting each date on each sheet to one named range. I then tried doing this
range("dateranges").values = range("datranges").value
this obviously didn't work. Anyhow, this is what I used that works, but I'm convinced that there is a better way.
Sub FinishOU()
Dim sh As Worksheet, wb1 As Workbook, r As Range, TestRange As Range
With Application
. ScreenUpdating = False
.Calculation = xlCalculationManual
.EnableEvents = False
Set wb1 = ActiveWorkbook
With wb1
.Save
For Each sh In Worksheets
Set TestRange = sh.Range("A1:S4")
For Each r In TestRange.SpecialCells(xlCellTypeFormulas).........................