Before Close Not Working On Closing Workbook
Sep 29, 2009
I am hoping someone can help. I am new to writing macros and have the following in the this workbook page. When opening the macro does exactly what I want and expect, but does not do the "before close" part. If I select the macro in editor and run it, it does just what I want, so dont understand what is going wrong. Do I have to put in some kind of prompt, or manually run this before close - preferably I would like it to just run.
secondly, I have password protected the workbook, but have to put the password in the macro, is there any way of making this invisible to anyone who then reads the macro....
View 9 Replies
ADVERTISEMENT
Nov 21, 2006
I have a workbook which includes a simple set of options on closing such as selecting the front sheet, restoring scrollbars and saving the workbook. To avoid problems with subscripts out of range I am using the ThisWorkbook statement to close the workbook.
This works fine and causes the workbook to close when close is clicked on any excel window. The problem is that excel falls over when it tries to resume closing the other workbooks. I am given (ironically) an error saying "excel has encountered a problem and needs to close". Does anyone know how to work around this?
My code is below:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Call Toolbars9(True)
With ActiveWindow
.DisplayHorizontalScrollBar = True
.DisplayWorkbookTabs = True
End With
View 8 Replies
View Related
Sep 14, 2006
I have a userform which opens when the workbook opens. Ideally Id like to have the userform open without the workbook coming up and have the workbook close when you close the userform. If thats not doable then is there a way to just close the workbook when the userform is closed?
View 3 Replies
View Related
Mar 22, 2012
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
View 9 Replies
View Related
Aug 12, 2009
I run most of my macros out of a file called "Personal.XLS" and I have this bit of code at the end of this particular macro which is closing personal.xls instead of the active file it is working on. It is set up on a loop and it should go to the next file in the directory but since it closes the file I run the macro from, the macro stops immediately. It appears that it believes "ThisWorkbook.Close" is referring to the file from which the macro is initiated.
View 2 Replies
View Related
Dec 24, 2008
I want to hide all toolbars and disable the red X upon opening of the spreadsheet, and to restore the main toolbars upon closing. That worked perfectly. (when I used the black code -see below)
I added in the red code as i wanted to disable the red X as well to ensure that users will always close the EXCEL worksheet via a Macro button.
The Macro will save the spreadsheet and close the worksheet and the Private sub should restore the toolbars.
View 7 Replies
View Related
Aug 3, 2009
I have a 'Summary' workbook which collates values from a series of 'sub-workbooks', (and can also update values in those sub workbooks).
the subworkbooks are setup so that when they are saved they also copy certain values out to another 'backup' file.
So there are 2 possible routes that the files will be used in:
1) SubWorkbook opened directly
- User opens SubWorkbook and makes some changes.
- User closes the SubWorkbook saving changes, or clicks the save button. The BeforeSave event opens the "restore" workbook, copies over the key values from the subworkbook, then saves & closes the "restore" workbook.
2) SubWorkbook opened remotely
- User / Admin opens the "Summary" workbook and changes an option.
- The summary workbook opens a subworkbook and makes changes, then saves it. The subworkbook should (as before), then open the restore workbook and save the key values etc.
The problem is in the second scenario the 'restore' workbook doesn't get opened.
I have created a set of 3 workbooks to illustrate the problem here.
Book1.xls = Summary workbook
Book2.xls = Subworkbook
Book3.xls = Restore workbook.
If you open book2 and then save it the 'BeforeSave' event will cause it to open book3 and write the output of 'Now()' to the next free row of book3-columnA, before then closing and saving book3,......
View 3 Replies
View Related
Jul 16, 2007
I have a useform that loads up with two buttons and I waat to force the user to chose one of the buttons. However, I have noticed that the user can just press the cross in the top right corner of the form to close the window and therefore not press either button.
Is there anyway I can stop the close form button working?
View 4 Replies
View Related
Aug 22, 2012
I have a perfectly functioning piece of code. There is still one snag, however. In the process of running the macro, three new workbooks are opened. I would like to close all three of those workbooks at the end. I am using the following procedure for each of the sheets:
To open the worksheet
Code:
Dim wb As WorkbookMsgBox "Please select the Stakeholder File"SHFile = Application.GetOpenFilename("Files (*.xls),*.xls", , "Please select the Stakeholder Workbook")If SHFile "False" Then Set wb = Workbooks.Open(Filename:=SHFile)
To close the worksheet at the end:
Code:
If Not wb is Nothing Then wb.Close SaveChanges:=False
The only problem is that I am getting bugs when closing multiple workbooks (3). I have assigned the names wb, vb and ab to the three workbooks.
View 5 Replies
View Related
Apr 19, 2006
I have some VBA code which opens another workbook, copies data from the first sheet in there and pastes into the current sheet before closing the workbook it got the data from. Is there any way of suppressing any messages associated with closing the other workbook? i.e. do you want to save - or possibly automatically generating a no message to the prompts?
View 3 Replies
View Related
Nov 27, 2012
I'm trying to close a workbook without saving it. But everytime I get the message box popupped twice.
These are the codes that I use:
VB:
Private Sub Workbook_BeforeClose _(Cancel As Boolean)
Dim YesOrNoAnswerToMessageBox As String
Dim QuestionToMessageBox As String
[Code].....
View 4 Replies
View Related
Jan 11, 2007
I have 4 employees who at the end of their shifts have to email me an excel workbook. The issue is that some of them are forgetful and after placing numerous post-it notes on their monitors one particular employees just forgets.
What i want to do if possible is that when the workbook gets closed, a pop-up window shows up on their screen reminding them to send the workbook. Even better would be if their was a button that they could click that would email the workbook as an attachment in the pop-up box.
View 11 Replies
View Related
Mar 25, 2014
I've created a macro which copies the current tab to a new workbook (Book X):
[Code]....
I then manipulate the copied data in Book X. Once this is done I move the manipulated sheet back into original file
[Code] .......
The problem i'm having is I'd like to close the newly created Workbook X file once the macro has run but Workbook X is usually called Book2, Book4, Book7, Book32 etc.
Workbook X will always be the previous file if i use the ALT TAB shortcut.
View 2 Replies
View Related
Dec 6, 2007
Is it possible to pop up a message when closing the workbook?
if so, could the message only popup if a certain cell is negative?
For example, This is what i would like to happen.
When workbook close is activated:
If cell A1=(-20), then pop-up "Please check your work and correct".
else, close workbook
View 14 Replies
View Related
Jun 26, 2009
How do I SAVE and CLOSE Workbook and it's instance of Excel.
I have other instances of excel open that I do not want closed.
I thought that I had this before, but I can't find it if I did. I do keep a list of all the requests where I ask for help and it's not in this list.
View 6 Replies
View Related
Nov 26, 2013
I wrote this macro where, from a userform, I click a button and it will fillout another form with certain data from the original WB to a different WB.
All is working fine and exactly the way I want it except, it won't close and save the other sheet. It will go back to the userform, as I want it to, but it will leave the other file in the background open.
This is the code:
Code:
Private Sub CommandButton6_Click()
'Allocation file fill out
Dim alloc As String
Dim allwb As Workbook
Dim ABA As Workbook
Dim Prompt As String
'Dim fd As FileDialog
Set ABA = ThisWorkbook
[code]....
View 2 Replies
View Related
Jul 2, 2008
Well I seem to be having an issue in a form i created. What happens is that when the user clicks a button it saves a worksheet of workbook as its own file, problem is that it will actually open the new worksheet as a workbook when I really just want it to save without opening a new instance. Here is the code
Dim IntWirefilename As String
Worksheets("Intwires").Select
Worksheets("Intwires").Copy
IntWirefilename = "International Wires Database"
Worksheets("Intwires").SaveAs FileName:="File Path" & IntWirefilename & (".xls")
Workbooks("File PathInternational Wires Database.xls").Close
I think the problem lies in the last line or it could be from the select and copy part.
I do not want it to open a new file after it saves it. Also can anyone help create a part that will bypass the overwrite existing file thing so that this file will just continuously save as the same file name rather than prompting the user constantly to Overwrite the file.
View 9 Replies
View Related
Nov 20, 2007
I need to alter the Close command on the title bar (the 'X' on the top right corner on the blue bar of excel)
Is there any way to alter the close button on the title bar to have it call a sub I created instead of actually closing excel?
View 6 Replies
View Related
Jan 23, 2014
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
View 4 Replies
View Related
Mar 30, 2007
I have a Macro that is stored in a specific workbook,"Projection Modeler.xls" the last line performed in this macro is the close workbooks without saving chages(this needs to be done due to the way this macro was written, and it would take too long to rewrite). If I would then like to reopen this workbook, and then rerun this macro, can I do this from inside the current macro (in a new sub routine, for instance), or do I have to write a macro outside of the workbook and then open the workbook and call the routine?
View 4 Replies
View Related
Jan 25, 2008
I have my Excel workbook open & have made changes. Now I close it and Excel prompts me if I want to save the changes. Is there a way to just close the workbook and automatically accept any changes without have the "Do you want to save changes" message appear?
What about if it is opened in read-only mode? Typically the workbook will not save any changes unless you save it off as another file name. If there is a solution to my question above, can it be enabled only when the workbook is opened in edit mode, or will it not auto-save changes over the file because Excel knows it was opened in read-only mode?
View 9 Replies
View Related
Nov 28, 2008
Need the VBA code to close a workbook, and not save it? I need it to open a workbook, run a macro, and close without saving. The code I have thus far is:
View 3 Replies
View Related
Sep 23, 2009
I'm trying to prevent a user from closing a perticular workbook.
Here is some important factors.
Workbook(A) = "LA-01-04-10" This is only one of 52 other but only one is open at a time.
Workbook(B) = "LA.xls" Always the same name and is always opened when one of the workbooks(A) above it opened.
When workbook (A) is opened it will then open another workbook (B) at that time the window is hidden workbook(B) So the user can only see workbook (A) I have a button on workbook(A) that unhides the window to show workbook(B) After the user completes his work in Workbook (B) they need to click another button that sorts the list and returns them to workbook(A) (Which also hides the window for workbook(B).
The problem is I have users that are trying to close workbook(B) instead of pressing the sort list button. So what I want is to prevent the user from closing workbook(B) by displaying a msgbox saying they need to press the button.
Ive tried several approches to this but I'm still having problems. The below script works if workbook(B) is active or shown. The message is displayed and the workbook will not close. However if the user is in workbook (A) and trys to close the message is displayed and both workbooks close like they are suppose to. But why is the message displayed?
One other note I should say is that not only does workbook(A)Open workbook (B) but it also closes it. Which may be why I'm having problems?
I have also included both workbooks so you can see all the code.
I have this code in Thisworkbook of workbook(B)
View 10 Replies
View Related
Jan 6, 2010
I have a workbook on a share drive that is used by multiple people. In the event that someone leaves the workbook open after using it, I have a timer function that pops up a splash screen after 4 minutes of inactivity which states, "This workbook will close in 1 minute if there is no further activity". If there is no further activity in that minute, the workbook closes.
The code works fine...unless the workbook is manually closed in that minute between the splash screen and when the timer would have closed the workbook. If that happens, the workbook closes normally and then briefly reopens and closes a minute later when the timer would have closed the workbook. Is there any code to prevent this?
View 4 Replies
View Related
Dec 13, 2011
Is there a way (with macros, I''m assuming), to make my workbook always return to the Main tab and Save automatically --- every time somebody closes the workbook from any tab - so that the next person who opens the workbook will have it ready to go on the main tab?
View 5 Replies
View Related
Feb 26, 2009
I have a workbook setup with 4 sheets that I'm using. I need the 4 sheets to type in all caps when I enter the data. I found a script, and followed the directions. It works great, yet when I close out of the workbook, and open it back up, the script doesn't work anymore. I go to check the 'view code', and it still there. I resave it, and try it again, and it still doesn't work, what am I missing? This is all new to me. I am saving it as a Workbook Macro enabled file type.
Once I get this resolved, is there a way to make it default to use the script everytime I open the workbook?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("B3:O210")) Is Nothing Then
Application.EnableEvents = False
Target = UCase(Target)
Application.EnableEvents = True
End If
On Error GoTo 0
End Sub
View 9 Replies
View Related
Sep 11, 2009
In the various codes I am using AutoOpen, AutoClose, Workbook_BeforeClose and Workbook_BeforeSave Subs. BeforeClose and BeforeSave are in '_ThisWorkbook'; AutoOpen and AutoClose are in a Module. I also use Workbook_Open, Workbook_Activate and Workbook_Deactivate, also in _ThisWorkbook. I put message boxes thru out code to be sure code was running right. The Workbook_BeforeClose is running twice under certain condition (when a cell in active workbook sheet is blank ("")). I do not understand why it is running twice.
For condition where there is data in cell M10, this creates a whole other issue ( multiple running of mutliple various Subs) which I believe I should deal with in different thread/question.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Worksheets("PanelSched").Activate
MsgBox "Test-Before close"
If Range("M10") <> "" Then
Dim PanelName As String
PanelName = Range("M10").Text
View 9 Replies
View Related
Jun 28, 2006
I have a spreadsheet that automatically opens a dialog box when the workbook is opened. This is a little disclaimer intended for other users of the spreadsheet, which if they click ok it simply closes the dialog sheet, but if they click cancel I want it to kick them out of the Workbook without asking them to save changes. I only want it to close that specific workbook incase they have others open that they haven't saved, etc.
The dialog box is opened as follows:
Private Sub Workbook_Open()
DialogSheets("Splash Screen").Show
End Sub
The code I have tried for the closing of the workbook is done by assigning the following macro to the cancel button (note, all but one of the sheets in my workbook is hidden and protected, including the dialog sheet):
Sub Splash_Close()
'
ThisWorkbook.Close SaveChanges:=False
'
'Also tried ActiveWorkbook.Close SaveChanges:=False
'Application.Quit (This closes all excel documents)
'
End Sub
I know there is something I am missing, keeping in mind I am quite experienced with excel, but relatively new to macros and VB programming.
Just a bit extra on this problem. I am creating the file as a template *.xlt, and the error I get when trying to run the example macro I gave at the start is a 1004 error Method close of object _workbook failed.
Also, in an ineresting (baffling for me at the moment) twist is that once you hit end on the error and it just goes to the first page of your spreadsheet, you can then go to ToolsMacros and run the macro from there, and it closes the workbook exactly the way I want it to!
View 8 Replies
View Related
Jul 6, 2006
I do not understand why my code returns a Run Time Error"9" Subscript out of range. With the following code, I opened a workbook and then wish to close that same workbook without saving. Eventually I will be pulling information from the workbook but for now I just want it to open and then close right away.
Private Sub cb_NewDate_Change()
ListIndex = cb_NewDate.ListIndex
If ListIndex = 0 Then
Application. ScreenUpdating = False
Workbooks.Open Filename:="I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls"
Application.Workbooks("I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls").Close False
End Sub
View 3 Replies
View Related
Jul 22, 2006
I have a central workbook that relies on data from other workbooks during the various calculations. I am trying to write some code so that when a user closes the central workbook, all of the other workbooks close as well. I have added my code to the thisWorkbook code, but this does not seem to work. Here is an example of the code. The object is to look for a workbook called Import_Sheet5 and to close it if it is open.
Private Sub Workbook_Close()
Dim Wb As Workbook
Dim sSought As String
sSought = UCase(wbName)
For Each Wb In Application.Workbooks
If wbName = Import_Sheet5 And InStr(Wb. Name, wbName) Then
Wb.Activate
Wb.Close SaveChanges:=False
End If
Next
End Sub
View 7 Replies
View Related
