I generate a large dataset of X- and Y-coordinates. Togeter, these datapoints form random curves. So, in excel, I want to calculate the Y-coordinate of the center of mass of these datapoints.
View 3 RepliesFollowing is what I want to do:
Draw a line from the center of the first cell to the center of another cell.
On this chart, I don't want to display the steep line segment between the first and second datapoints. I only want to display the datapoints. I also want to not display the segment of the label associated with this segment.
View 3 Replies View RelatedYou know when you open a picture using windows paint,
there's a coordinate on the bottom right of the screen right?
Now, Is it possible to make a macro that records the coordinate everytime i maka a dot using "pencil" feature in paint?
So everytime i click on a spot in the image (draw a single dot), excel would track the coordinates of these dots and write it vertically in 2 columns (x & y)... the result is something like this :
I am setting up a spreadsheet to be able to calculate loads on spread footings. The thing is the footings may be as small as a 2 x 2 or as large as a 6 x 6 or any combination inbetween so I need a coordinate system (to the nearest inch with a max of 1800 inches) to be able to assign each spread footing to a certain spot in the system with which I can calculate the soil stresses.
I intend to make this as idiot proof as possible for anyone who uses this spreadsheet so I was going to set it up as in the attachment where a user can input each individual load on each footing and the distance between it and its neighbors. The numbers are just random values with in each footing and feet between each one. Naturally most people would probably begin data entry in the upper left footing first so I was going to make that the origin unless for coding purposes the lower left would be best.
In this case the upper left footing would be 0,0 and the footing to its right 20,0 and the one farther right 55,0 (20+35) and so forth.
I have the following data points:
A
B
1
X
Y
2
0.18
0.52
[Code] ......
And can create a scatter diagram fine. However, I've been asked if it's possible to show on the graph, for each point a line to it's respective X and Y co-ordinate. For example, for row 4 (in red), on the same scatter graph, I'd like there to be two lines for this point,
Line1 drawn from (0.1, 0) to (0.1, 0.26) and
Line2 drawn from (0,0.26) to (0.1,0.26)
I know it's possible to overlap graphs in Excel, but I can't find how to achieve this with scatter plots
I have a spreadsheet of several sheets, but 7 of them (Red, Orange, Yellow, Green, Blue, Purple, Black) are the guts of the file and where I make adjustments. The layout of these sheets is the same, there are several cells of data on each sheet that coordinate with data in the same cell on other sheets. The problem is the sheets are so big, when I change sheets I have to go find the data that was in the same cell (or close) to where I just was on a previous sheet. So for example if on “Red” I am in cell AX253 and I go to sheet “Yellow” I would like it if AX253 would be selected when I get there. And if I select a different cell like D56 on Yellow and pick Green then I want D56 to be automatically selected on Green.
In addition, I plan to use a check box on an eighth sheet called “White” to turn the feature on and off. I have never written code for a check box before.
Is this to terribly difficult to do? I did some searching and saw some code that was similar to this but could not get it to work.
I often find that it would be useful to have a data type for geographic coordinates (i.e. latitudes and longitudes) that would e.g. permit/facilitate formatting negative values as South and West, direct subtraction of one latitude/longitude from another, conversion of degrees-minutes-seconds to decimal degrees, properly formatted axis labels when using Excel to draw maps (at the moment, I am editing the axis labels in the PostScript file by hand, when I don't use chart labeller to paste axis labels in) and so on.
(Time formats could be used, if only they could be prevented from converting hours over 24 to days, which I have not found out how to do.)
Therefore: does anyone know of any Add-In out there somewhere that could supply the lack of a geographic coordinate data type?
I want to combine all data in a single graphic. It must be like a coordinate system.
The file is in that address: [URL] .......
I have 32 pairs of coordinates (X,Y). If I graph them using a scatter chart in Excel, I can see that it looks like they suggest a linear relationship between the points.
Other than printing the chart and trying to draw a "best fit" line manually, is there some sort of way I can get Excel to come up with the "best" linear formula (y=mx+b format)?
I'm trying to use DGET to pull coordinate pairs from a list and match them up to a label based on certain criteria. I can't seem to get it to work. I'm also thinking that the way I have it set up, the coordinate pairs might not stay together and that has to be the case. My criteria is multiple cell based too and I don't think DGET can handle that.
For example, In order for a coordinate pair to be labeled "B" the x coordinate must satisfy a condition and the y coordinate must satisfy a different condition. Can I use DGET with the AND function?
I have a table with 6 columns (with headers A -F) and 10 rows. There are values in each cell. I want to take a value from each of the 6 columns and concatinate them. I would like some code that would generate every possible resulting string and I would like the possiblities set out in one column.
Apart from the fact that it might be tricky enough to produce the code , by my calculations there will be 10 to the power of 6 possibilities and as far as I know there are only 65000 rows in my version of Excel. If they had to be put into 2 or 3 columns I would not mind
I have the below spreadsheet and require to format it depending on what appears in column AE and column N.
example if in AE it says AAA and the figure in column N is >=-1 and Microsoft Excel - Belgium - Jupiler League.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutAB3AC3AD3AE3AB4AC4AD4AE4AB5AC5AD5AE5AB6AC6AD6AE6AB7AC7AD7AE7AB8AC8AD8AE8=
ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAE2DateHomeAwayFTHGFTAGFTRHTHGHTAGHTRHDA51GoalsHDA17GoalsHDA7GoalsWHHWHDWHA51177*303/08/2007MechelenAnderlecht01A00DA-1.02A-2.18A-1.715.53.51.534.54.54.5AAA404/08/2007CharleroiRoeselare11D10H*****H2.00H3.291.623.45-1-1-1HH504/08/2007Club*BruggeBergen21H11DH2.65H2.47H2.001.3647.50.360.360.36HHH604/08/2007DenderGerminal12A00D***************2.883.22.2-1-1-1*
704/08/2007FC*BrusselsWesterlo01A00DA0.76D0.94H1.712.23.22.881.2-1-1ADH804/08/2007GenkCercle*Brugge31H31HH2.31H2.24D1.001.3348.50.330.33-1HHD2007-2008*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
How can I put in a formula which will look at the contents of cell A1 and B1 and then if the contents of cell A1 match you put in the contents of cell B1 into B2. I know this sounds confusing so let me explain cell A1's contents are 1 and B2 has the amount of $312.50 so if cell A2 is also a 1 then I need to put in the amount of $312.50 into B2, same would go for B4 since A4 matches the contents of A3 I need to put $625.10 into B4....
View 9 Replies View RelatedI have a file with thousands of records and on the name field, I have case like this:
1 "John Dough"
2 "John Dough "
As a result, when I pivot the data, I see duplicate lines for the same name. How can I eliminate the extra spaces at the end (row 2 and 3 above)?
I have 4 employees by 52 weeks tabs in a workbook. The first 4 tabs are as follows:
Pat 010810
Dan 010810
Max 010810
Ann 010810
I would like some method (maybe VBA?) that I can rename the subsequent tabs, having the same names but the date with a seven day increment; i.e.the next tab would show Ann 011510, etc.
I don't know how to code, but can get to the VBA page and copy really well.
I need to transfer a large amount data (~2,5 million lines of data) from one spreadsheet to another while making sure the destination file is kept in a certain format.
Spreadsheet "oxno" is the file that needs filling out with data provided to me in spreadsheet "ox"
The value that is the matching criteria will be the ITS account number (Field B in "ox" and field A in "oxno") and the currency (Field B in "oxno" and field G in "ox")
So I want a macro to look in "oxno" and use field the values of field "a" & "b" and search for the them in "ox" in fields "B" & "G". Once it finds a match it should copy the value of field "I" in "ox" and paste into field "n" on "oxno".
The next data to be copied should be what goes into field "O" in "oxno" this data is derived from field "L" or "M" but only when its of numerical value with one non numerical field in it (usually a "/"). Last value that I need copied over is Field "T" on "oxno" this is derived from field "J" or "M".
I realise the potential conflict because two sets of queries will be looking to gather values from field "M" on "ox". That is why I am hoping when we look for value for field "O" in "oxno" we only look for numbers with one non numerical field in it (usually a "/") .
After finishing writing this up, I realise how wordy this has become appologies for that, but hopefully someone will be able to understand what I am looking to achieve and will be able to suggest a solution.
I would like to do a mass paste of this formula: =VLOOKUP(A23,A2:C9, 2)
With the only variable that changes along the way (A24, then A25, etc). But as I paste, (A2:C9), the table array, keeps changing as well, to A3:C10, A4:C11, etc.
How can I prevent this and only have A23 change as I paste?
I have a list of 2000 hyperlinks (http) that I need to download, I'm working on a corporate network so I can't just use a mass download client. Cany anyone give me some guidance creating a macro to save the target of the hyperlink as a file then move on to the next hyperlink until the list is exhausted.
=NORM.DIST(-0.7525,0,1,FALSE)=0.30057
I want to do inverse 0.30057 To get -0.7525 ,NORM.INV(0.30057,0,1) This function returns only cumulative distribution .
I am working on combining several Excel spreadsheets and a report from a different program into one master Excel report. I have a macro built so the report can be compiled efficiently every quarter. However, I have one obstacle to overcome before I reach report programming bliss: The other program's report does not use a date format that Excel can interpret as a date. Excel interprets it as a value.
Specifically, the other program outputs September 3, 2009 as 9032009. It is crucial that the report be arranged in chronological order (time is a separate field). Does anybody know if there is a way to mass convert a bunch of values that look like 9032009 into 9-03-2009?
I have a workbook with lots of analytic data from my company which I want to share with other people not associated with the company. Obviously I can't share private data so I'm wondering if theres a quick way to modify all the data I have with 'fake numbers' which means I could share it. With fake numbers no privacy rules will be breached etc.
Is there a quick way to randomly change all numbers by +/- 10-20%?
Lets say i have 2 columns A and B as shown below. I want to have a userform that has a list that shows the uniques in column A ie. 1,2,3 and a drop down next to each one that shows my options yes, no, maybe. If the user selects yes for 1 and submits the form i want all 1's in column a to have yes in column B.
A B
1 Yes
2 No
3 Maybe
1 Yes
2 No
3 Maybe
1 Yes
2 No
3 Maybe
1 Yes
2 No
3 Maybe
I am trying to separate a huge group of phone numbers from one cell into individual cells in a column. the numbers are currently separated by a semicolon. Is there an easy way to perform this action?
View 5 Replies View RelatedI have a large worksheet with a unit name column, category, brigade, etc.
Everytime I get the data, I have to make the same changes. Is it possible for me to automate the process so that for example if the name column contains 'CID' or 'AMC MGD' delete those rows, if it contains 'ENG' change the brigade column for that row to '92ENG' etc.?
I'm trying to make a BMI (Body Mass Index) calculator. I've attempted it already but to no success. My first mistake was to read the values from cells in the spreadsheet which made things more complex than needed. So I started a new macro using a form instead for all data entry. I'm running into multiple problems with this
-Ask the user which method they prefer (see below formulas).
-Input the result into a certain cell.
English BMI Formula
BMI = ( Weight in Pounds / ( Height in inches ) x ( Height in inches ) ) x 703
or
Metric BMI Formula
BMI = ( Weight in Kilograms / ( Height in Meters ) x ( Height in Meters ) )
I have an accounts spreadsheet that I copy and paste customers names and addies into from the website back end sales information.
I do not copy e-mail addresses.
I have a mailto: with an e-mail address appear in the file in lots of places, it seems I delete it from some cells and it appears in others, my file is infested with the things now.
I can delete one by one, but this would take me weeks any ideas of how I can ctrl a select all cells and mass delete these things.
I am face with making a brand new accounts file which is a lot of work.
I have around 200 files, all named from 001.xls to 200.xls, all containing the same format, the same number of colums, but a different number of lines.
Now I have the great task to actually open all these files and copy each files data into one file and start analyzing it. Well, since I personally have no interest to open, copy and paste 200 hundred times, I am wondering if there is any faster way to let excel automatically copy the data into this master file?
I am thinking about somehing like *='001.xls'Sheet2!B2:E20*
One thing is that each file never has more than 20 entries, thus i would only need excel to import the from line 2 to 20 from a certain file and then do same thing all over again with the next file.
I am trying to do a mass import of several thousand excel files into one file. The headers of all the files are the same, but the data inside each file is different. I thought about using Access but it wants me to import each individual one.
I have zero experience in writing a Macro
trying to insert rows into certain sections of a large data set.
Currently, there are over 25k rows of data and I need to insert individual blank rows between certain lines. The process is too daunting to try and do it individually (CTRL+Click row number) so I need to find a way to do it based on a specific number in one of the columns.
I can insert individual rows after filtering the data to only show the rows that need blank sets under them
I've included a sample to illustrate my point. There needs to be a blank row before every row with a "1" in the "count" column.
Data Sample.xls‎